Abstract:Composite materials with high thermal conductivity have the advantages of corrosion resistance, fatigue resistance, easy processing, and electrical insulation and hence are widely used in industries concerned with high heat dissipation, such as aviation, aerospace, and electronics. Adding fillers with high thermal conductivity, such as carbon black, metal particles, carbon fiber, and carbon nanotubes, to rubber matrix materials is recognized as an efficient method to improve the thermal conductivity of the resulting composite materials. However, when single filler is used, the content of the fillers often must be improved to obtain high thermal conductivity, which entails a complicated process and high production cost. In this study, a hybrid filler of spherical aluminum nitride (AlN) and carbon fiber is added to rubber matrix materials. These hybrid filler particles greatly influence the thermal conductivity of the composite materials. To explore the effects of the hybrid fillers on the thermal conductivity of the composite materials, a three-dimensional random representative volume element (RVE) model filled with both spherical AlN and carbon fiber was developed using a random sequential addition method and homogenization theory. The size of the RVE model was 40 μm×40 μm×40 μm. To prevent the formation of "larger fillers" by the aggregation of small fillers, a lower volume fraction of filler was investigated in this study. ANSYS software was used to simulate the influence of the space distribution, volume ratio, and filling fraction of the two fillers on the thermal conductivity of the composite material with hybrid fillers. A steady-state heat conduction model was adopted, and a temperature gradient from 20 to 40°C was applied in the X, Y, and Z directions. The results showed that the thermal conductivity was different in the three directions due to the difference in the orientation of the carbon fibers. It can be seen from the temperature distribution clouds that there are many thermal network paths in the direction of higher thermal conductivity. The average thermal conductivity in all directions could macroscopically characterize the thermal conductivity of the composite materials. Carbon fiber plays a dominant role in the thermal conductivity of the composite material, and the thermal conductivity increases linearly with the ratio of the fillers. When the volume fraction of the carbon fibers is constant, the thermal conductivity of the composite material increases slowly with the increase in the AlN fraction. In comparison, when the volume fraction of AlN is constant, the thermal conductivity of the composite material increases rapidly with the increase of in the carbon fiber fraction. Because of enhanced synergistic effects between the fillers in the matrix, a lower filling fraction of carbon fibers could be used to obtain higher thermal conductivity when designing the structure of composite materials. The results of this study provide a theoretical basis for the preparation of composite materials with high thermal conductivity.

Effect of filler orientation induced by force on thermal conductivity of AlN/BN/CNTs/SR composites

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Influences of Nanoparticle Content on Electrical and Thermal Performances of Micro‐nano Hybrid Composites for Packaging Materials

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Thermal conductivity of rubber composite materials with a hybrid AlN/carbon fiber filler

Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio

Synergistic Effect of Aluminum Nitride and Carbon Nanotube-Reinforced Silicon Rubber Nanocomposites

Preparation of branched Al 2 O 3 and its synergistic effect with carbon nanotubes on the enhancement of thermal conductive and electrical insulation properties of silicone rubber composites

Effect of Carbon Nanotube Orientation on Mechanical Properties and Thermal Expansion Coefficient of Carbon Nanotube-Reinforced Aluminum Matrix Composites

Construction of Oriented Interconnected BNNS Skeleton by Self‐Growing CNTs Leading High Thermal Conductivity

Synergetic enhancement of thermal conductivity by constructing BN and AlN hybrid network in epoxy matrix

Synergistic effects of oriented AlN skeletons and 1D SiC nanowires for enhancing the thermal conductivity of epoxy composites

Preparation of boron nitride nanosheets using a chemical exfoliation method as a thermal conductive filler for the development of silicone thermal composites Part I: effect of single- and hybrid-filler additions on the silicone composite performance

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Effect of hexagonal boron nitride content on the anisotropy of hot-press-sintered AlN/BN composite ceramics

Effect of surface modification of aluminum nitride on electrical and thermal characterizations of thermosetting polymeric nanocomposites

Construction of AlN oriented skeletons using in-situ reaction strategy and their enhancement effect on the thermal conductivity of epoxy composites

Effect of Boron Nitride Particle Geometry on the Thermal Conductivity of a Boron Nitride Enhanced Polymer Composite Film