Abstract:S-band high-gradient accelerating structures were proposed to accelerate protons from 30 to 230 MeV for a compact proton therapy linac in Institute of Modern Physics. A backward traveling wave structure and a single-periodic magnetically coupled standing wave structure were designed, and differences between these two structures were analyzed to select a more suitable one for the proton therapy linac. In this paper, a novel single-periodic magnetically coupled standing-wave accelerating structure was studied, with an optimized nose cone that related to a smaller peak surface electric field and higher shunt impedance, with the reduced number of coupling holes and mechanical von Mises stress thus making it possible for higher duty factor and longer rf pulse operation, also with larger coupling holes and improved cell-to-cell coupling thus making this structure suitable for operating in π mode. An 11-cell high-power prototype for β=0.26 particles was developed with an active length of 143 mm. This prototype cavity is supposed to operate at an accelerating gradient of 30 MV/m with 0.1% duty factor, corresponding to a maximum surface electric field of 105 MV/m and a peak rf power of 3.43 MW. Cavity design, optimization, manufacture, rf measurement, and high-power test will be discussed in this paper. https://doi.org/10.1103/PhysRevAccelBeams.27.092002 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Achieving a Realistic Design for a Superconducting Gantry with Large Momentum Acceptance for Proton Therapy

Design and Optimization of Beam Optics for a Superconducting Gantry Applied to Proton Therapy

Design of a Large Momentum Acceptance Proton Therapy Gantry Utilizing AG-CCT Magnets

Layout Optimization Of Corrector Magnets For A Proton Therapy Beamline Via Genetic Algorithm

Design study of a superconducting gantry for carbon beam therapy

Design of a Combined X-Y Scanning Magnet with High Field Uniformity for Pencil Beam Scanning Proton Therapy

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

A Framework for the Magnetic Design of Large Bore, Curved AG-CCT Magnets for Proton Therapy Facilities

Eddy current analysis and optimization of fast scanning magnet for a proton therapy system

Magnetic Design Of An Alternating Gradient Canted-Cosine-Theta Superconducting Magnet For Proton Therapy

Design of a Light and Fast Energy Degrader for a Compact Superconducting Gantry with Large Momentum Acceptance.

Design of Prototype Magnets for HUST Proton Therapy Beamline

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Design of Gantry Beamline for HUST Proton Therapy Facility

Influence of Fringing Field and Second-Order Aberrations on Proton Therapy Gantry Beamline

Electromagnetic Design of MRI Superconducting Magnet Based on Novel Hybrid Optimization Methods

S-band high-gradient low single-periodic magnetically coupled standing-wave accelerating structure for a proton therapy linac

Design, fabrication, and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility

Medical therapy and imaging fixed-field alternating-gradient accelerator with realistic magnets

Design of a Curved Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System