Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Design of Gantry Beamline for HUST Proton Therapy Facility

Design and Development of the Beamline for a Proton Therapy System

Design of Prototype Magnets for HUST Proton Therapy Beamline

Design of the Fast Scanning Magnets for HUST Proton Therapy Facility

Design and Optimization of Beam Optics for a Superconducting Gantry Applied to Proton Therapy

Prototype Development of the Beam Diagnostic System of a Proton Therapy Facility Based on a Superconducting Cyclotron

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

Comparison Of Beam Optics For Normal Conducting And Superconducting Gantry Beamlines Applied To Proton Therapy

Achromatic Beamline Design For A Laser-Driven Proton Therapy Accelerator

Design of the Energy Selection System for Proton Therapy Based on GEANT4

Transmission Calculation and Intensity Suppression for a Proton Therapy System

Design of HUST-PTF Beamline Control System for Fast Energy Changing

Eddy current analysis and optimization of fast scanning magnet for a proton therapy system

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends

Design, fabrication, and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility

Design of the Integral Field Measurement System of Dipole Magnets

The optimization for the conceptual design of a 300 MeV proton synchrotron

Beam distribution homogenization design for laser-driven proton therapy accelerator

Influence of Fringing Field and Second-Order Aberrations on Proton Therapy Gantry Beamline