Abstract:Nowadays, electric vehicles (EV) are developed at a very fast pace. Currently, the batteries that are used in EVs are lithium-ion cells with different shapes and configurations. However, the ground impact caused by road debris can hit and penetrate the battery pack and results in a very severe fire accident. To study the ground impact accidents, a simplified finite element model of the battery pack structure using typical cylindrical 21700 cells, and floor-type architecture is analysed. Based on this model, the protection structure is improved using different core geometry and fibre metal laminate material arrangements. The evaluated criteria are battery shortening and specific energy absorption (SEA) of the protective plate. Studies are conducted to investigate the effect of different arrangements of composite layer, thickness of the composite layer, different load cases, thickness of the metal core, and different composite materials. The model is validated using the energy method. Simulation results show that adding composite backplate results in a lower battery shortening. The thinner composite layer also improves SEA while still maintaining safe battery shortening. Two load cases are also evaluated for chosen models to ensure that the protection structure is still effective. Thinner unidirectionally stiff double hull (USDH) thickness also improves SEA, up to a point where battery shortening increases significantly. Finally, changing glass fibre reinforced polymer (GFRP) material to carbon fibre reinforced polymer (CFRP) improves both battery shortening and SEA, but not in a significant way that the cost increase is justified. In this study, the most effective design for the battery pack protection structure is a USDH metal core layer with (h: w: t) = (15.87: 15.87: 1) mm and a 1.2 mm GFRP backplate layer with quasi-isotropic lay-up. Battery shortening is 51.58% better, SEA is 150.54% higher, and structure weight is 40.59% lower compared to the baseline case.

Numerical and Experimental Validation of Fiber Metal Laminate Structure for Li-ion Battery Protection Subjected to High-velocity Impact Loading

Low velocity impact response of fiber metal laminates with nano-patterned metal surfaces

Study of Various Hybrid Composite Materials and Geometries for Battery Pack Protection Undergoing Ground Impact Loading

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

Investigation of Crashworthiness of Carbon Fiber-Based Electric Vehicle Battery Enclosure Using Finite Element Analysis

Structural Lattice Topology and Material Optimization for Battery Protection in Electric Vehicles Subjected to Ground Impact Using Artificial Neural Networks and Genetic Algorithms

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-based Battery Enclosures for Crashworthiness

Design and optimization of lithium-ion battery protector with auxetic honeycomb for in-plane impact using machine learning method

Fiber metal laminates for high strain rate applications with layerwise shock impedance tuning

A Material Model for the Orthotropic and Viscous Behavior of Separators in Lithium-Ion Batteries under High Mechanical Loads

On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review

Simulation on Impact Response of FMLs: Effect of Fiber Stacking Sequence, Thickness, and Incident Angle

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Performance of Li-ion Pouch Batteryunder a High-Velocity Impact: Experiment and Numerical Simulation

Materials Testing of a Lithium Ion Battery Separator for Use in Finite Element Analysis

Design Optimization of Auxetic Structure for Crashworthy Pouch Battery Protection Using Machine Learning Method

Numerical assessment of the side impacts on lithium-ion battery module integrated with honeycomb reinforcement

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

Novel Lightweight and Protective Battery System Based on Mechanical Metamaterials