Abstract:Aiming at improving the utilization of Si‐based anode materials, this study unveils the development of a mosaic structured interface through direct contact prelithiation. This distinctive interface, rich in lithium silicates, manifests ideal conductivity and mechanical characteristics. It facilitates a capacity retention of 77% following 200 cycles in full cell, wherein the active materials possess a high Si content exceeding 70%. Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long‐term cycling of Si‐based anodes. An in‐depth quantitative analysis of the interface that forms during the prelithiation of SiOx is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiOx and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO1.3 anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention (77%) after 200 cycles. The insights provided in this work can be used to further optimize high Si loading (>70% by weight) based anodes in future high energy density batteries.

Focusing on the Subsequent Coulombic Efficiencies of SiO<i><sub>x</sub></i>: Initial High-Temperature Charge after Over-Capacity Prelithiation for High-Efficiency SiO<i><sub>x</sub></i>-Based Full-Cell Battery

Li+ Solvation Structure Modification in Chemical Prelithiation Enabling Spatially Homogeneous Sei Toward High Performance Siox Anode

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

The facile preparation and performances of prelithiated silicon oxide anode materials

Constructing a Robust Solid–Electrolyte Interphase Layer Via Chemical Prelithiation for High‐Performance SiOx Anode

In Situ Artificial Hybrid SEI Layer Enabled High‐Performance Prelithiated SiO x Anode for Lithium‐Ion Batteries

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

High Performance SiOx Anode Enabled by AlCl3-MgSO4 Assisted Low-Temperature Etching for Lithium-Ion Batteries

Construction of Air-Stable Pre-Lithiated SiOx Anodes for Next-Generation High-Energy-density Lithium-Ion Batteries

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

High Initial Coulombic Efficiency of SiO Enabled by Controlling SiO2 Matrix Crystallization

Chemical Pre-lithiation of SiO x Anodes with a Weakly Solvating Solution of Polycyclic Aromatic Hydrocarbons for Lithium-Ion Batteries

Fundamental Understanding of the Low Initial Coulombic Efficiency in SiOx Anode for Lithium-Ion Batteries: Mechanisms and Solutions

Elucidating the Role of Prelithiation in Si‐based Anodes for Interface Stabilization

Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage.

Fast and Scalable Complete Chemical Prelithiation Strategy for Si/C Anodes Enabling High-Performance LixSi–S Full Cells

Overcoming The Low Initial Coulombic Efficiency of Si Anodes Through Prelithiation in All-solid-state Batteries