Abstract:The shear stirrups and bend-up reinforcement in ultra-high-performance concrete (UHPC) beams could potentially be excluded due to the superior mechanical properties of UHPC. This paper reports the new findings of an experimental research into the factors that influence the shear behavior of non-stirrup UHPC beams. Fourteen beams were tested in shear, comprising twelve non-stirrup UHPC beams and two normal concrete (NC) beams reinforced with stirrups. The test variables included the steel fiber volume content (2.0%, 1.5%, and 0%), the shear span-to-effective-depth ratio (1.2, 1.8, 2.0, and 3.1), beam width (150 mm and 200 mm), and beam height (300 mm, 350 mm, and 400 mm). The results demonstrated that the steel fiber volume content had a significant influence on the shear behavior of the non-stirrup UHPC beams. The failure modes of the beams without steel fibers were typically brittle, whereas those reinforced with steel fibers exhibited ductile failure. The shear resistance of the beams could be significantly enhanced by the addition of steel fibers in the concrete mix. Furthermore, the post-cracking load-bearing performance of the beams could also be markedly improved by the addition of steel fibers. In addition, the shear span-to-effective-depth ratio had a considerable impact on the failure mode and the ultimate shear strength of the tested beams. The contribution of steel fibers to the shear capacity of the UHPC beams was observed to increase as the shear span-to-effective-depth ratio increased. The French standard formulae tended to overestimate the contribution of steel fibers, and the calculation results were found to be more accurate for UHPC beams with a moderate shear span-to-effective-depth ratio (around 2.0). Moreover, the French standard formulae demonstrated greater accuracy at a larger beam height for calculating the contribution of UHPC matrix.

Shear Behavior of Ultra-High-performance Concrete Beams Prestressed with External Carbon Fiber-Reinforced Polymer Tendons

Experimental Investigation on Shear Behavior of FRP Prestressed Concrete Beams with Shear Reinforcements

Shear behavior of FRP-UHPC tubular beams

Shear Behaviour of FRP-confined Concrete/uhpc Core-Encased Rebar: Experimental Investigation and Design Method

Shear Behavior of Post-Tensioned Concrete Beams with Draped FRP Tendons and Without Transverse Reinforcement

Flexural Behavior of UHPC Beams Prestressed with External CFRP Tendons

Shear performance of GFRP reinforced UHPC short beams

Experimental Study on Shear Behavior of Prestressed Ultra-High Performance Concrete I-girders

Experimental studies on shear behavior of concrete beams prestressed with CFRP tendons

Shear Behavior of Non-Stirrup Ultra-High-Performance Concrete Beams: Contribution of Steel Fibers and UHPC

Experimental and Analytical Study on Shear Behavior of Strain‐hardening Cementitious Composite Beams Reinforced with Fiber‐reinforced Polymer Bars

Flexural Behavior and Design of Ultrahigh-Performance Concrete Beams Reinforced with GFRP Bars

Shear Behavior of Concrete Beam Reinforced in Shear with Carbon Fiber-Reinforced Polymer Mesh Fabric (CFRP-MF) Configuration

Shear behavior and strength prediction of HFRP reinforced concrete beams without stirrups

Reinforced Ultra-High Performance Concrete Beam under Flexure and Shear: Experiment and Theoretical Model

Shear resistance and calculation method of GFRP-reinforced concrete beams with CFRP mesh fabric as shear reinforcement

Effect of Transverse Reinforcement on Shear Response of Fiber-Reinforced Polymer Post-Tensioned Concrete Beams

Fatigue Prediction Model of Ultra-High-performance Concrete Beams Prestressed with CFRP Tendons

Shear Strengthening of Corroded RC Beams Using UHPC–FRP Composites

Shear performances of reinforced ultra-high performance concrete short beams

Experimental and Theoretical Study on the Shear Behavior of CFRP Bar-Reinforced UHPFRC Beams Considering Orientation and Volume Fraction of Steel Fibers