Shear performance of partially encased composite beams with high-strength steel and UHPC
Ning Hao,Yong Yang,Yicong Xue,Longkang Xu,Shiqiang Feng,Yunlong Yu,Bo Huang
DOI: https://doi.org/10.1016/j.jcsr.2023.108217
IF: 4.349
2023-09-20
Journal of Constructional Steel Research
Abstract:Various countries across the globe have implemented strategic policies that encourage the development and use of high-performance materials in engineering structures. This study focused on the shear performance of partially encased composite beams with high-strength steel and UHPC (PEHC beams). Seven PEHC beams under simply supported three-point loading conditions were tested to investigate the effect of main parameters such as the shear span-depth ratio, thickness of steel web, types of steel web, and types of stirrups on shear failure modes, crack patterns, load-deflection behavior, and the response of strains. Two failure modes were observed in PEHC beams, involving diagonal compression failure and shear compression failure. As the shear span-depth ratio decreased from 2.0 to 1.5 and 1.0, the shear strength increased significantly by 13.3% and 70.8%, respectively. Test results demonstrated that the increase in the thickness of steel web and the use of steel solid web positively affect the shear strength of PEHC beams, whereas the impact of normal-strength stirrups types proved insignificant. Finally, a theoretical method was proposed to predict the shear strength of PEHC beams by considering the coworking of four mechanisms: the composite truss, the steel web, the stirrups, and the steel fibres. Then the method was validated by the good agreement between the predicted and tested shear strength results, highlighting its applicability in providing accuracy.
construction & building technology,engineering, civil