Abstract:In recent years, interfacial technology encompassing attributes such as defect passivation and stability enhancement of perovskite solar cells (PSCs) has captivated the solar research fraternity with their power conversion efficiency (PCE) being as high as 25.5%. In accordance with the theory of compounding two functional groups integrally into a single structure under relatively moderate formation conditions, this paper presents an efficacious interfacial passivation modification strategy for PSCs with well-controlled morphologies and passivated charged surface states using a bidentate ligand perfluorocarbon copolymer (PFOMA). The strategy involves self-assembly of biomimetic PFOMA on a perovskite surface due to the coordination binding between the catecholic OH groups of PFOMA and Pb2+. The time-resolved photoluminescence measurements demonstrated that the effective passivation of catecholic OH groups benefits from the inhibition of the photogenerated carrier recombination. Furthermore, the long fluorocarbon alkyl chains of PFOMA bestow the perovskite surface with higher resistance against moisture. Hence, the resulting PFOMA-modified PSC can accomplish an above-average efficiency of about 20.66% (with an average PCE of 19.71%) with a notable increment in the open-circuit voltage of about 40 mV compared to the control voltage (1.12 mV). Particularly, the PFOMA-modified PSC exhibits a remarkable enhancement in the moisture stability factor under a relative humidity of 70 ± 5%, retaining >90% of their initial efficacies along with considerably upgraded device performance (an average PCE of 19.71% and a champion device PCE of 20.66% were achieved) and an enhanced moisture stability factor even under a relative humidity of 70 ± 5%. The highly proficient passivation strategy demonstrated in this work can help the future exploration of this function-oriented synthesis strategy and can pave the path for the universal application of PSCs employing the modification of polymers and more organic species.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00808?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00808</a>.Schematic illustration of the fabrication process of PFOMA-modified PSCs; XPS and SEM images of perovskite and PFOMA-modified perovskite; UV–vis spectra, VOC distribution and PCE distribution of the control and PFOMA-modified perovskite films; XRD patterns of perovskite films with different PFOMA concentrations; SEM images, J–V curves, IPCE, and integrated current density curves of a champion PSC; typical performance of PSC devices before and after PFOMA modification; and parameters of TRPL spectra for the control and PFOMA-modified PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00808/suppl_file/el0c00808_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly efficient and low hysteresis methylammonium-free perovskite solar cells based on multifunctional oteracil potassium interface modification

Synergistic enhancement of efficiency and stability of perovskite solar cells via dual interface modification

High‐Efficiency and Stable Perovskite Solar Cells via Buried Interface Modification with Multi‐Functional Phosphorylcholine Chloride

Engineering Interface Structure to Improve Efficiency and Stability of Organometal Halide Perovskite Solar Cells.

Inhibiting hysteresis and optimizing the performance of perovskite solar cells

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

Bifunctional Interfacial Modification Engineering with Biomimetic Perfluoro-Copolymer-Enabled High-Efficiency and Moisture-Resistant Perovskite Solar Cells

Vacancies substitution induced interfacial dipole formation and defect passivation for highly stable perovskite solar cells

Heterointerface Energetics Regulation Strategy Enabled Efficient Perovskite Solar Cells

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

Multifunctional Interface Treatment of Phosphate for High-Efficiency Perovskite Solar Cells

Multifunctional molecule interface modification for high-performance inverted wide-bandgap perovskite cells and modules

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

Modulating J-V hysteresis of planar perovskite solar cells and mini-modules via work function engineering

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Low-cost and easily prepared interface layer towards efficient and negligible hysteresis perovskite solar cells

Tailoring the Interface by a Multifunctional Amphiphilic Molecule Enabled 24.84%-Efficiency and Stable Perovskite Solar Cells

A Multifunctional Additive Strategy to Stabilize the Precursor Solution and Passivate Film Defects for MA-free Perovskite Solar Cells with an Efficiency of 22.75%

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Interface and Bulk Engineering by Dual Sulfonates Toward High Efficiency Perovskite Solar Cells with Better Reproducibility and Stability