Abstract:In recent years, interfacial technology encompassing attributes such as defect passivation and stability enhancement of perovskite solar cells (PSCs) has captivated the solar research fraternity with their power conversion efficiency (PCE) being as high as 25.5%. In accordance with the theory of compounding two functional groups integrally into a single structure under relatively moderate formation conditions, this paper presents an efficacious interfacial passivation modification strategy for PSCs with well-controlled morphologies and passivated charged surface states using a bidentate ligand perfluorocarbon copolymer (PFOMA). The strategy involves self-assembly of biomimetic PFOMA on a perovskite surface due to the coordination binding between the catecholic OH groups of PFOMA and Pb2+. The time-resolved photoluminescence measurements demonstrated that the effective passivation of catecholic OH groups benefits from the inhibition of the photogenerated carrier recombination. Furthermore, the long fluorocarbon alkyl chains of PFOMA bestow the perovskite surface with higher resistance against moisture. Hence, the resulting PFOMA-modified PSC can accomplish an above-average efficiency of about 20.66% (with an average PCE of 19.71%) with a notable increment in the open-circuit voltage of about 40 mV compared to the control voltage (1.12 mV). Particularly, the PFOMA-modified PSC exhibits a remarkable enhancement in the moisture stability factor under a relative humidity of 70 ± 5%, retaining >90% of their initial efficacies along with considerably upgraded device performance (an average PCE of 19.71% and a champion device PCE of 20.66% were achieved) and an enhanced moisture stability factor even under a relative humidity of 70 ± 5%. The highly proficient passivation strategy demonstrated in this work can help the future exploration of this function-oriented synthesis strategy and can pave the path for the universal application of PSCs employing the modification of polymers and more organic species.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00808?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00808</a>.Schematic illustration of the fabrication process of PFOMA-modified PSCs; XPS and SEM images of perovskite and PFOMA-modified perovskite; UV–vis spectra, VOC distribution and PCE distribution of the control and PFOMA-modified perovskite films; XRD patterns of perovskite films with different PFOMA concentrations; SEM images, J–V curves, IPCE, and integrated current density curves of a champion PSC; typical performance of PSC devices before and after PFOMA modification; and parameters of TRPL spectra for the control and PFOMA-modified PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00808/suppl_file/el0c00808_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bifunctional Interfacial Modification Engineering with Biomimetic Perfluoro-Copolymer-Enabled High-Efficiency and Moisture-Resistant Perovskite Solar Cells

Surface Passivation with a Fluorocarbon-Based Pyridine Derivative for High-Crystallinity Perovskite Solar Cells with Efficiency Over 20% and Good Humidity Stability

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Perovskite films passivated by a dendrimer toward high efficiency and high stability devices

Reconfiguration toward Self‐Assembled Monolayer Passivation for High‐Performance Perovskite Solar Cells

Surface Defect Passivation and Energy Level Alignment Engineering with a Fluorine-Substituted Hole Transport Material for Efficient Perovskite Solar Cells

Tailoring Defect Passivation for Efficient and Stable Perovskite Solar Cells via an Ionic Liquid Additive

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Synergistic enhancement of efficiency and stability of perovskite solar cells via dual interface modification

Tailoring the Interface by a Multifunctional Amphiphilic Molecule Enabled 24.84%-Efficiency and Stable Perovskite Solar Cells

Impeded Degradation of Perovskite Solar Cells Via the Dual Interfacial Modification of Siloxane

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

Passivation of perovskite surfaces using 2-hydroxyacetophenone to fabricate solar cells with over 20.7% efficiency under air environment

Interfacial Energy Level Alignment and Defect Passivation by Using a Multifunctional Molecular for Efficient and Stable Perovskite Solar Cells

Stabilizing Perovskite Solar Cells Based on 2,2′,7,7′‐Tetrakis(N,N‐DI‐P‐Methoxyphenylamine)‐9,9′‐Spirobifluoren with Perfluoropolyethers

Spontaneous surface/interface ligand-anchored functionalization for extremely high fill factor over 86% in perovskite solar cells

Modification of Hydrophobic Self‐Assembled Monolayers with Nanoparticles for Improved Wettability and Enhanced Carrier Lifetimes Over Large Areas in Perovskite Solar Cells