Abstract:Organic-inorganic halide perovskite is believed to be a potential candidate for high efficiency solar cells because power conversion efficiency (PCE) was certified to be more than 22%. Nevertheless, mismatch of PCE due to current density (J)-voltage (V) hysteresis in perovskite solar cells is an obstacle to overcome. There has been much lively debate on the origin of J-V hysteresis; however, effective methodology to solve the hysteric problem has not been developed. Here we report a universal approach for hysteresis-free perovskite solar cells via defect engineering. A severe hysteresis observed from the normal mesoscopic structure employing TiO2 and spiro-MeOTAD is almost removed or does not exist upon doping the pure perovskites, CH3NH3PbI3 and HC(NH2)2PbI3, and the mixed cation/anion perovskites, FA0.85MA0.15PbI2.55Br0.45 and FA0.85MA0.1Cs0.05PbI2.7Br0.3, with potassium iodide. Substantial reductions in low-frequency capacitance and bulk trap density are measured from the KI-doped perovskite, which is indicative of trap-hysteresis correlation. A series of experiments with alkali metal iodides of LiI, NaI, KI, RbI and CsI reveals that potassium ion is the right element for hysteresis-free perovskite. Theoretical studies suggest that the atomistic origin of the hysteresis of perovskite solar cells is not the migration of iodide vacancy but results from the formation of iodide Frenkel defect. Potassium ion is able to prevent the formation of Frenkel defect since K+ energetically prefers the interstitial site. A complete removal of hysteresis is more pronounced at mixed perovskite system as compared to pure perovskites, which is explained by lower formation energy of K interstitial (-0.65 V for CH3NH3PbI3 vs -1.17 V for mixed perovskite). The developed KI doping methodology is universally adapted for hysteresis-free perovskite regardless of perovskite composition and device structure.

Modulating J-V hysteresis of planar perovskite solar cells and mini-modules via work function engineering

Inhibiting hysteresis and optimizing the performance of perovskite solar cells

New Insights into the Origin of Hysteresis Behavior in Perovskite Solar Cells

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Rationally Induced Interfacial Dipole in Planar Heterojunction Perovskite Solar Cells for Reduced J–V Hysteresis

Low-cost and easily prepared interface layer towards efficient and negligible hysteresis perovskite solar cells

Hysteresis‐Free Planar Perovskite Solar Module with 19.1% Efficiency by Interfacial Defects Passivation

A Study of Hysteresis in Perovskite Solar Cell

Multifunctional molecule interface modification for high-performance inverted wide-bandgap perovskite cells and modules

Highly efficient and low hysteresis methylammonium-free perovskite solar cells based on multifunctional oteracil potassium interface modification

Highly Efficient Perovskite Solar Cells with Neglectable Hysteresis and Increased Open Circuit Voltage Via a Nickel Chloride Interface Modification

Interfacial Oxygen Vacancies as a Potential Cause of Hysteresis in Perovskite Solar Cells

Interface Charge Accumulation Dynamics in 3D and Quasi-2D Perovskite Solar Cells

Fundamentals of Hysteresis in Perovskite Solar Cells: From Structure‐Property Relationship to Neoteric Breakthroughs

Heterojunction Engineering and Ideal Factor Optimization Toward Efficient MINP Perovskite Solar Cells

Multifunctional Buffer Layer Engineering for Efficient and Stable Wide‐Bandgap Perovskite and Perovskite/Silicon Tandem Solar Cells

Interface optimization and growth control for high efficiency wide bandgap perovskite solar cells

On the Origin of Hysteresis in Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering

Interface Engineering for Highly Efficient and Stable Perovskite Solar Cells