Significantly enhanced energy storage density and efficiency of BNT-based perovskite ceramics via A-site defect engineering
Fei Yan,Kaiwei Huang,Tao Jiang,Xiaofeng Zhou,Yunjing Shi,Guanglong Ge,Bo Shen,Jiwei Zhai
DOI: https://doi.org/10.1016/j.ensm.2020.05.026
IF: 20.4
2020-09-01
Energy Storage Materials
Abstract:<p>In recent years, sodium bismuth titanate (Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>, BNT) -based relaxor ferroelectrics have attracted more and more attention for energy storage applications owing to their high power density, large saturated polarization (P<sub>S</sub>)/maximum polarization (P<sub>max</sub>) as well as meeting the needs of environment-friendly society. However, the recoverable energy storage density (W<sub>rec</sub>) and energy storage efficiency (η) of most BNT-based relaxor ferroelectric ceramics are lower than 3.5 J cm<sup>−3</sup> and/or 80%, respectively, in recently. In this work, the relaxor ferroelectric ceramics of 0.75Bi<sub>(0.5+x)</sub>Na<sub>(0.5-x)</sub>TiO<sub>3</sub>-0.25SrTiO<sub>3</sub> (BNST-x) were constructed via A-site defect engineering and prepared by tape-casting method. It is worth noting that an ultrahigh W<sub>rec</sub> of 5.63 J cm<sup>−3</sup> together with outstanding η of 94% can be achieved simultaneously at a relative high electric field of 535 kV cm<sup>−1</sup> with the composition of BNST-0.08, Meanwhile, for BNST-0.08 ceramic, the η is higher than 90% and the variation of W<sub>rec</sub> is less than ±2% and ±5% within the frequency range of 1-100 Hz and temperature range of 30-130 °C, respectively. The W<sub>rec</sub> is always higher than 3 J cm<sup>−3</sup> and did not deteriorate significantly after 10<sup>4</sup> fatigue. In addition, the BNST-0.08 ceramic also possesses ultrafast discharge speed (t<sub>0.9</sub>, less than 125 ns) and ultrahigh power density (P<sub>D</sub>, higher than 147 MW cm<sup>−3</sup>) within the temperature range of 30-130 °C at 300 kV cm<sup>−1</sup>. Therefore, the BNST-0.08 ceramic is promising candidate environment-friendly materials for advanced pulsed power capacitor applications and the energy storage properties of BNT-based relaxor ferroelectrics can be enhanced significantly via A-site defect engineering.</p>
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology