Abstract:In order to improve the intrinsic brittleness of TiAl alloys, Ti2AlNb alloys with outstanding ductility and toughness at room temperature, and good high-temperature performance are competitive candidates in constructing the TiAl-based laminated composites. In this work, TiAl/Ti2AlNb laminated composites are successfully synthesized by vacuum hot pressing combined with the foil-foil (sheet) metallurgy. Under the pressure of 65 MPa, different holding time and temperature of hot pressing are tried and the optimized fabrication parameter is acquired as 1050 degrees C/120 min/65 MPa. Along with the changes of processing parameters, the defect, microstructure, interface, phase transformation and the corresponding mechanical properties are detailly discussed. The results show that the TiAl/Ti2AlNb laminated composite fabricated at 1050 degrees C for 2 h achieves a good metallurgical interface bonding. The corresponding interface microstructure is composed of region I and region II. The region I consists of O, alpha(2) and B2/beta phase, and region II is made up of oz 2 . Subsequently, the tensile tests indicate that the composite synthesized at 1050 degrees C for 2 h possesses a maximum strength of 812 MPa and a total elongation of 1.31% at room temperature, and a strength of 539.71 MPa and the highest total elongation of 10.34% at 750 degrees C. The well synergistic deformation ability between the interface and the two base alloys endows the composite an excellent tensile performance. Moreover, the composite processed at 1050 degrees C for 2 h behaves the best fracture toughness in both arrester orientation and divider orientation with the value of 32.6 MPa.m 112 and 30.1 MPa.m(1/2), respectively. The Ti2AlNb alloy in the laminated structure effectively release the stress around the crack tip and plays a role in toughening. Further, crack deflection, crack bridging, crack blunting and fragmentation also make contributions to enhance the fracture toughness of the laminated composites. (C) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals.

Mechanical Performances of AlN/Al Metallized Ceramic Substrates Fabricated by Transient Liquid Phase Bonding and Pre-Oxidation Treatment

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Comparative Studies on Microstructures, Strengths and Reliabilities of Two Types of AlN Direct Bonding Copper Substrates

The Research Of Al/Aln And Al/Al2o3 Substrate

Research of the performance of Al/Al2O3 substrate

Microstructure Evolution Mechanism and Mechanical Properties of AlNP/Al Composites Bonded to 6061al at Low Temperature

The study and fabrication of Al/AlN substrate

The Design of Nano-Porous Photocatalytic Intermediate Layer to Fabricate the Copper Layer on AlN Ceramic with High Bonding Strength Through the Interlocking Microstructure

Experimental and Modeling Studies on the Microstructures and Properties of Oxidized Aluminum Nitride Ceramic Substrates

Effect of Processing Parameters on the Microstructure and Mechanical Properties of TiAl/Ti2AlNb Laminated Composites

Transient Liquid Phase Diffusion Bonding of Ni3Al Superalloy with Low-Boron Nickel-Base Powder Interlayer

Microstructure and Mechanical Properties of Ni3Al-based Alloy Joint Transient Liquid Phase Bonded Using Ni/Ti Interlayer

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Reinforcement study of anodizing treatment with various temperatures on aluminum substrates for stronger adhesive bonding with carbon fiber composites

Microstructure Evolution and Mechanical Properties of Transient Liquid Phase (TLP) Bonded Joints of TiAl Intermetallics

Effects of Bonding Parameters on the Properties of TLP Diffusion Bonding Joints of Ti-22Al-25Nb O-phase Alloy

Fabrication of AlN/Cu Composite Structure Via Laser Surface Metallization Assisted Direct Bonding Technology

Interface structure and mechanical performance of TLP bonded joints of Al2O3p/6061Al composites using Cu/Ni composite interlayers

Interface Development in Cu-Based Structures Transient Liquid Phase (TLP) Bonded with Thin Al Foil Intermediate Layers

Effect of Interfacial Microstructure Evolution on the Peeling Strength and Fracture of AMB Cu-metalized AlN Substrate

Metallization development for AIN/W cofired substrate at low temperature