Metal-organic Framework Based on Flexible Ligands and CoII-CoII-CoII System: Selective Gas Adsorption and Magnetic Properties

Tao Zhou,Jianlei Qian,Xin Lu,Heng Xu,Lei Chen,Chuanlei Zhang

DOI: https://doi.org/10.1039/d1nj06042b

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:A novel MOF material shows unique magnetic characteristics and selective absorption properties for CO2.

What problem does this paper attempt to address?

Metal–organic framework based on flexible ligands and Co II –Co II –Co II system: selective gas adsorption and magnetic properties

Tao Zhou,Jianlei Qian,Xin Lu,Heng Xu,Lei Chen,Chuanlei Zhang

DOI: https://doi.org/10.1039/d1nj06042b

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:A novel MOF material shows unique magnetic characteristics and selective absorption properties for CO 2 .

chemistry, multidisciplinary
A new anionic metal–organic framework showing tunable emission by lanthanide(III) doping and highly selective CO2 adsorption properties

rongying chen,dan tian,yunwu li,yingbin lv,hongwei sun,ze chang,xianhe bu

DOI: https://doi.org/10.1039/c5ra02935j

IF: 4.036

2015-01-01

RSC Advances

Abstract:A new three-dimensional porous metal-organic framework, {[NH2(CH3)(2)][Zn(atz)(ox)]center dot H2O}(n) (1) (Hatz = 5-amino-1H-tetrazole, H(2)ox = oxalic acid), has been solvothermally synthesized and characterized by elemental analysis, IR, TG, and single-crystal X-ray diffraction analysis. Complex 1 exhibits an anionic framework that can be simplified as a rarely reported 4-connected lon network. Complex 1 could be utilized as a platform for emission tuning by doping different lanthanide ions. In addition, gas adsorption studies reveal that 1 has a high isosteric heat of CO2 and good adsorption selectivity for CO2 over CH4 and N-2.
A metal–organic framework that exhibits CO2-induced transitions between paramagnetism and ferrimagnetism

Jun Zhang,Wataru Kosaka,Yasutaka Kitagawa,Hitoshi Miyasaka

DOI: https://doi.org/10.1038/s41557-020-00577-y

IF: 24.274

2020-11-30

Nature Chemistry

Abstract:With adequate building blocks, metal–organic frameworks (MOFs) can combine magnetic ordering and porosity. This makes MOFs a promising platform for the development of stimuli-responsive materials that show drastically different magnetic properties depending on the presence or absence of guest molecules within their pores. Here we report a CO2-responsive magnetic MOF that converts from ferrimagnetic to paramagnetic on CO2 adsorption, and returns to the ferrimagnetic state on CO2 desorption. The ferrimagnetic material is a layered MOF with a [D+–A−–D] formula, produced from the reaction of trifluorobenzoate-bridged paddlewheel-type diruthenium(ii) clusters as the electron donor (D) with diethoxytetracyanoquinodimethane as the electron acceptor (A). On CO2 uptake, it undergoes an in-plane electron transfer and a structural transition to adopt a [D–A–D] paramagnetic form. This magnetic phase change, and the accompanying modifications to the electronic conductivity and permittivity of the MOF, are electronically stabilized by the guest CO2 molecules accommodated in the framework.

chemistry, multidisciplinary
A 2D flexible cobalt-MOF: reversible solid-state structural transformation, two-step and gate-opening adsorption behaviours, and selective adsorption of C 2 H 2 over CO 2 and CH 4

Shan-Shan Wang,Yu-Jie Liang,Wei Guo,Yue Yin,Xiao-Yu Li,Quan-Qing Xu,Ai-Xin Zhu,Bo Huang

DOI: https://doi.org/10.1039/d3dt00478c

IF: 4

2023-06-08

Dalton Transactions

Abstract:A new 2D flexible cobalt( II ) framework (Co-MOF) exhibits a reversible solid-state structural transformation upon guest molecule removal/uptake. After activation, Co-MOF-α with 1D porous channels transformed into Co-MOF-β (0D voids) accompanied by a shift in metal and carboxylate coordination modes, the rotation of organic linkers and the contraction of interstitial spaces. Gas adsorption experiments reveal that Co-MOF-β exhibits a two-step CO 2 adsorption isotherm and close-to-open (type F-IV) isotherms for C 2 H 2 , C 2 H 4 and C 2 H 6 at 195 K. Moreover, it shows typical type I adsorption isotherms for the above gases and the selective uptake of C 2 H 2 over CH 4 and CO 2 at room temperature.

chemistry, inorganic & nuclear
The Selective CO2 Adsorption and Photothermal Conversion Study of an Azo-Based Cobalt-MOF Material

Li-Long Dang,De-Xi Zong,Xiao-Yan Lu,Ting-Ting Zhang,Tian Chen,Jiu-Long Sun,Jiu-Zhou Zhao,Meng-Yang Liu,Shui-Ren Liu

DOI: https://doi.org/10.3390/molecules27206873

IF: 4.6

2022-10-14

Molecules

Abstract:A new metal–organic framework (MOF), [Co2(L)2(azpy)]n (compound 1, H2L = 5-(pyridin-4-ylmethoxy)-isophthalic acid, azpy = 4,4′-azopyridine), was synthesized by a solvothermal method and further characterized by elemental analysis, IR spectra, thermogravimetric analysis, single-crystal and powder X-ray diffraction. The X-ray single-crystal diffraction analysis for compound 1 indicated that two cis L22− ligands connected to two cobalt atoms resulted in a macrocycle structure. Through a series of adsorption tests, we found that compound 1 exhibited a high capacity of CO2, and the adsorption capacity could reach 30.04 cm3/g. More interestingly, under 273 K conditions, the adsorption of CO2 was 41.33 cm3/g. In addition, when the Co-MOF was irradiated by a 730 nm laser, rapid temperature increases for compound 1 were observed (temperature variation in 169 s: 26.6 °C), showing an obvious photothermal conversion performance. The photothermal conversion efficiency reached 20.3%, which might be due to the fact that the parallel arrangement of azo units inhibited non-radiative transition and promoted photothermal conversion. The study provides an efficient strategy for designing MOFs for the adsorption of CO2 and with good photothermal conversion performance.

chemistry, multidisciplinary,biochemistry & molecular biology
Tetrazole-based Porous Metal-Organic Frameworks for Selective CO2 Adsorption and Isomerization Studies.

Rui Zhang,De-Xian Meng,Fa-Yuan Ge,Jv-Hua Huang,Li-Fei Wang,Yong-Kai Xv,Xing-Gui Liu,Mei-Mei Meng,Hong Yan,Zhen-Zhong Lu,He-Gen Zheng,Wei Huang

DOI: https://doi.org/10.1039/c9dt04068d

IF: 4

2020-01-01

Dalton Transactions

Abstract:Tetrazole-based porous MOFs and isomers were synthesized for adsorbing carbon dioxide, showing high selectivity.
A 2-Fold Interpenetrated Nitrogen-Rich Metal–Organic Framework: Dye Adsorption and CO 2 Capture and Conversion

Xiao-Li Yang,Yang-Tian Yan,Wen-Juan Wang,Ze-Ze Hao,Wen-Yan Zhang,Wenhuan Huang,Yao-Yu Wang

DOI: https://doi.org/10.1021/acs.inorgchem.0c03506

IF: 4.6

2021-02-16

Inorganic Chemistry

Abstract:A bifunctional ligand strategy for modification of the functional pores is of great significance in the structural design of metal–organic frameworks (MOFs). Herein, a new 2-fold interpenetrated "pillared-layer" 3D Co-MOF, {[Co(HL)(4,4′-bipy)]·DMF·2H2O}n (1), was successfully synthesized by using two kinds of ligands, imidazolecarboxylic acid and pyridine. The metal–carboxylic layers are pillared by the 4,4′-bipy ligand, displaying a 3D framework with rectangular 3D channels (high BET surface of 190.9 m2 g–1 and maximum aperture of 3.9 Å) that are decorated with abundant uncoordinated N and O atoms. 1 shows good water stability and thermal stability (320 °C). The proper pores and active sites endowed 1 with a selective adsorption of Congo red in aqueous solution. In addition, a high CO2 adsorption capacity and an excellent CO2 chemical conversion were observed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.0c03506?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c03506</a>.Selected bond distances and angles of 1, TGA curves, PXRD patterns, IR spectra, UV–visible spectra, sorption measurements, and 1H NMR spectrum (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.0c03506/suppl_file/ic0c03506_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
Cobalt-Based Metal–Organic Frameworks for Adsorption of CO 2 and C 2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

Pei-Pei Cui,Xiu-Du Zhang,Yan-Shang Kang,Yue Zhao,Wei-Yin Sun

DOI: https://doi.org/10.1021/acs.inorgchem.0c03461

IF: 4.6

2021-01-25

Inorganic Chemistry

Abstract:Recently, metal–organic frameworks (MOFs) have been investigated as potential materials for CO2 capture and light hydrocarbon storage/separation due to their high porosity, large surface area, and tunable skeleton structures. In this work, the six cobalt-based MOFs 1–6 were successfully synthesized under solvothermal conditions by a mixed-ligand strategy. 1 and 2 have the same framework structure with a topology of {42·5}2{44·510·67·76·8}, while the structures of the 3–6 frameworks are the same with a topology of {42·5}2{44·510·69·74·8}. The adsorption properties of these MOFs for CO2 and C2 hydrocarbons were then investigated, and the effect of the functional groups was discussed. The results revealed that the introduction of amino and bromo groups could effectively strengthen the adsorption performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.0c03461?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c03461</a>.PXRD patterns, TG data, and additional figures (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.0c03461/suppl_file/ic0c03461_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
Microporous Cobalt(II)-Organic Framework with Open O-Donor Sites for Effective C2H2 Storage and C2H2/CO2 Separation at Room Temperature

Di-Ming Chen,Xiao-Hui Liu,Jia-Yue Tian,Jia-Hui Zhang,Chun-Sen Liu,Miao Du

DOI: https://doi.org/10.1021/acs.inorgchem.7b02764

IF: 4.6

2017-01-01

Inorganic Chemistry

Abstract:The self-assembly of a bifunctional organic ligand with a formate-bridged rod-shaped secondary building unit leads to a new microporous metal-organic framework (MOF). This MOF shows a moderately high C2H2 storage capacity (145 cm3/g) and an excellent adsorption selectivity for C2H2/CO2 (11) at room temperature. Furthermore, its discriminatory sorption behavior toward C2H2 and CO2 was probed by computational analysis in detail.
Cobalt-Based Metal-Organic Frameworks for Adsorption of CO2 and C2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

Pei-Pei Cui,Xiu-Du Zhang,Yan-Shang Kang,Yue Zhao,Wei-Yin Sun

DOI: https://doi.org/10.1021/acs.inorgchem.0c03461

IF: 4.6

2021-01-01

Inorganic Chemistry

Abstract:Recently, metal-organic frameworks (MOFs) have been investigated as potential materials for CO2 capture and light hydrocarbon storage/separation due to their high porosity, large surface area, and tunable skeleton structures. In this work, the six cobalt-based MOFs 1-6 were successfully synthesized under solvothermal conditions by a mixed-ligand strategy. 1 and 2 have the same framework structure with a topology of {42·5}2{44·510·67·76·8}, while the structures of the 3-6 frameworks are the same with a topology of {42·5}2{44·510·69·74·8}. The adsorption properties of these MOFs for CO2 and C2 hydrocarbons were then investigated, and the effect of the functional groups was discussed. The results revealed that the introduction of amino and bromo groups could effectively strengthen the adsorption performance.
A 2D Metal–organic Framework Composed of a Bi-Functional Ligand with Ultra-Micropores for Post-Combustion CO2 Capture

Guodong Xu,Yongwu Peng,Zhigang Hu,Daqiang Yuan,Bruno Donnadieu,Dan Zhao,Hansong Cheng

DOI: https://doi.org/10.1039/c5ra04295j

IF: 4.036

2015-01-01

RSC Advances

Abstract:A 2D MOF named NUS-5 with a unique topological structure was synthesized, demonstrating remarkable thermal stability and ultra-micropores resulting in high CO2 storage capacity and excellent sorption selectivity of CO2 over N2.
Selective Adsorption of CO2/CH4 and CO2/N2 Within a Charged Metal–organic Framework

Lidan Kong,Ruyi Zou,Wenzhu Bi,Ruiqin Zhong,Weijun Mu,Jia Liu,Ray P. S. Han,Ruqiang Zou

DOI: https://doi.org/10.1039/c4ta01993h

2014-01-01

Abstract:A new ultramicroporous metal–organic framework with an anionic framework and counter cations accommodated in the large channels is reported for CO2 capture.
Pore functionalization, single-crystal transformation and selective CO2 adsorption in chemical stable pillared-layer Co(II) based metal–organic framework

Wei Huang,Zheng Yin,Xiao-Ting Hu,Zhi-Yue Dong,Ming-Hua Zeng

DOI: https://doi.org/10.1016/j.inoche.2021.108758

IF: 3.428

2021-09-01

Inorganic Chemistry Communications

Abstract:The high-efficiency CO2 separation using metal-organic frameworks (MOFs) is crucial in CO2 capture and subsequent conversion for green carbon cycling, yet challenged by rational optimizing the size, shape, sorption site and microenvironment of the pores. The new MOFs with formula [Co2(btd)2(dpbt)2]·3DMF (1) is constructed from two matched long linkers of 4,4'-(benzoic[i1,2,5]thiadiazole-4,7-diyl)dibenzoic (H2btd) and 4,7-di(4-pyridyl)-2,1,3- benzothiadiazole) (dpbt) under solvothermal condition. The compound processes 3-fold interpenetrated pillared-layer frameworks, generating 1D channels sized at 10.8 × 8.2 Å2 and with exposed thiadiazole groups for improved CO2 sorption. The framework is quite rigid confirmed by quite limited changes in crystallographic parameters during solvent exchange and guest removal in single-crystal-to-single-crystal (SC-SC) fashion. The Co(II)-MOF exhibits unprecedented good chemical stability in aqueous solution with pH ranging from 1 to 12, retaining unchanged PXRD patterns for more than 24 h. The activated MOFs show better adsorption for CO2 over N2 with selectivity of 18.8 at 273 K, benefitted from the merits of narrow 1D channels and appending Lewis basic sites on the pore surface.

chemistry, inorganic & nuclear
"Click''-Extended Nitrogen-Rich Metal-Organic Frameworks and Their High Performance in Co2-Selective Capture

Pei-Zhou Li,Xiao-Jun Wang,Kang Zhang,Anjaiah Nalaparaju,Ruyi Zou,Ruqiang Zou,Jianwen Jiang,Yanli Zhao

DOI: https://doi.org/10.1039/c3cc49457h

IF: 4.9

2014-01-01

Chemical Communications

Abstract:Metal-organic frameworks (MOFs), NTU-111, 112, 113, were assembled from diversely "click''-extended tetracarboxylates. Since the MOFs were incorporated with exposed metal sites and accessible nitrogen-rich triazole units, they exhibited high CO2-selective capture capabilities supported by experimental investigations and molecular simulation studies.
Porous Metal-Organic Frameworks with Chelating Multiamine Sites for Selective Adsorption and Chemical Conversion of Carbon Dioxide.

Dan Zhao,Xiao-Hui Liu,Jin-Han Guo,Hua-Jin Xu,Yue Zhao,Yi Lu,Wei-Yin Sun

DOI: https://doi.org/10.1021/acs.inorgchem.7b03099

IF: 4.6

2018-01-01

Inorganic Chemistry

Abstract:A combination of carbon dioxide (CO2) capture and chemical fixation in a one-step process is attractive for chemists and environmentalists. In this work, by incorporating chelating multiamine sites to enhance the binding affinity toward CO2, two novel metal-organic frameworks (MOFs) [Zn2(L)(2,6-NDC)2(H2O)]·1.5DMF·2H2O (1) and [Cd2(L)(2,6-NDC)2]·1.5DMF·2H2O (2) (L = N1-(4-(1 H-1,2,4-triazole-1-yl)benzyl)- N1-(2-aminoethyl)ethane-1,2-diamine, 2,6-H2NDC = 2,6-naphthalenedicarboxylic acid, DMF = N, N-dimethylformamide) were achieved under solvothermal conditions. Both 1 and 2 possess high selectivity for adsorption of CO2 over CH4 at room temperature under atmospheric pressure. Moreover, 1 has one-dimensional tubular channels decorated with multiactive sites including NH2 groups and coordination unsaturated Lewis acid metal sites, leading to efficient catalytic activity for chemical fixation of CO2 by reaction with epoxides to give cyclic carbonates under mild conditions.
Metal‐Organic Frameworks: Bimetallic Metal‐Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion (small 17/2016)

Ruyi Zou,Pei‐Zhou Li,Yong‐Fei Zeng,Jia Liu,Ruo Zhao,Hui Duan,Zhong Luo,Jin‐Gui Wang,Ruqiang Zou,Yanli Zhao

DOI: https://doi.org/10.1002/smll.201670089

IF: 13.3

2016-01-01

Small

Abstract:On page 2334, R. Q. Zou, Y. L. Zhao, and co-workers present a porous metal-organic framework (MOF) that serves as a platform for studying the metal exchange effect on both CO2 adsorption and catalytic fixation. The effect is demonstrated by catalytic CO2 cycloaddition with propylene oxide to produce propylene carbonate. Molecular dynamic simulations are carried out to further confirm the catalytic performance of these MOFs on chemical fixation of CO2 to carbonates. This research sheds light on how metal exchange could influence the intrinsic properties of MOFs.
Molecular Engineering in a Family of Pillared-Layered Metal-Organic Frameworks for Tuning Gas Adsorption Behavior.

Shuai Liang,Fa-Yuan Ge,Shuang-Shuang Ren,Ming-Yuan Lei,Xiang-Jing Gao,He-Gen Zheng

DOI: https://doi.org/10.1039/d1dt00431j

IF: 4

2021-01-01

Dalton Transactions

Abstract:In this work, inspired by a water-assisted three-dimensional supramolecular structure 1, we use a mixed-ligand strategy to form a 3D pillared-layered matrix by the introduction of linear ligands to compete against the water molecules. The resulting analogue microporous MOFs of 2-H, 2-F and 2-N, decorated with different functional groups, similarly show the CO2 uptake. Thanks to the negligible N2 adsorption capacity, enhanced selective adsorption towards CO2 is achieved in compound 2-N. That is, we present here an alternative plan for the high CO2 selective adsorption performance. In addition, the structure stability and moderate affinity for CO2 of these microporous MOFs endow them with excellent reusability.
Tetrazole-Viologen-based Flexible Microporous Metal-Organic Framework with High CO2 Selective Uptake.

Ya-Ping Zhao,Yan Li,Cai-Yan Cui,Yu Xiao,Rong Li,Shuai-Hua Wang,Fa-Kun Zheng,Guo-Cong Guo

DOI: https://doi.org/10.1021/acs.inorgchem.6b00320

IF: 4.6

2016-01-01

Inorganic Chemistry

Abstract:A flexible metal-organic framework (FMOF) with functionalized pores was hydrothermally synthesized to improve CO2 affinity and selectivity. The obtained FMOF exhibits a reversible shrinking and swelling framework transformation, which is triggered by the adsorption of CO2 rather than by the adsorption of N2 and CH4. At ambient temperature and an atmospheric pressure, this FMOF shows not only a high CO2 uptake (98 cm(3) g(-1), 19.3 wt %) but also a good calculated adsorption selectivity for CO2 over both CH4 and N2 (CO2/CH4 50:50 v/v: 28.6:1, CO2/N2 15:85 v/v: 210.4:1 calculated by ideal adsorbed solution theory), indicating potential applications in the purification of natural gas and industrial flue gas.
Nitrogen-enriched flexible metal-organic framework for CO2 adsorption

Andrés Lancheros,Subhadip Goswami,Ximena Zarate,Eduardo Schott,Joseph T Hupp

DOI: https://doi.org/10.1039/d4dt01457j

2024-08-20

Abstract:A novel MOF named [Zn2(L)(DMF)] was synthesized using solvothermal methods from the reaction of the new linker (4,4',4''-(4,4',4''-(benzene-1,3,5-triyltris(methylene))tris(3,5-dimethyl-1H-pyrazole-4,1-diyl))tribenzoic acid) and Zn(NO3)2·6H2O. This new MOF was characterized by means of different techniques: powder X-ray diffraction, N2 adsorption and desorption isotherms, thermogravimetric analysis, and scanning electron microscopy. Furthermore, suitable crystals were obtained, which allowed us to perform the X-Ray structure determination of this MOF. The capability of these new MOF to adsorb CO2 at different temperatures was measured and its isosteric enthalpy of adsorption was calculated. The novel MOF shows an uncommon node composed of a Zn3(-COO)6(DMF)2, and the asymmetric unit contains one crystallographically independent linker, one DMF molecule, and two Zn atoms. The [Zn2(L)(DMF)] MOF is a microporous material with high crystallinity and stability up to 250 °C. The multiple nitrogenated pyrazole linkers in its framework enhance its CO2 adsorption capabilities. This material exhibits a low CO2 isosteric enthalpy of adsorption (Hads), comparable to previously reported values for similar nitrogenated materials. All the observed CO2 adsorption capacities were further supported by DFT calculations.
A Series of Cation-Modified Robust Zirconium-Based Metal-Organic Frameworks for Carbon Dioxide Capture

Feng Xie,Akash Patel,Kui Tan,Ryan Crichton,Gene Hall,Jianyuan Zhang,Jing Li,Guo-Yu Zhang,Thomas M Osborn Popp,Eder Cedeño Morales,Andrew J Nieuwkoop

DOI: https://doi.org/10.1039/d2ce01633h

IF: 3.756

2023-01-07

CrystEngComm

Abstract:Metal-organic frameworks (MOFs) represent one of the most promising porous solids for possible use as sorbents to control and reduce the greenhouse gas emission. Studies have shown that open metal sites (OMS) interact strongly with carbon dioxide and thus, serve as efficient binding sites for CO2 capture. However, many OMS-bearing MOFs are lack of framework stability and often have high regeneration temperature. To seek ways to solve the stability issue, we designed a series of isoreticular MOFs, Zr-tcpb-COOM (M = alkali/alkaline earth metal), by exchange of metal ions with protons on Zr-tcpb-COOH via post-synthetic modifications (PSM). The pristine MOF (Zr-tcpb-COOH) has a very robust framework. The PSM process does not deteriorate the framework stability but creates metal binding sites that form strong bonds with carbon dioxide. The results show that at low CO2 pressure, the uptake amount is enhanced considerably using Zr-tcpb-COOM and is in trend of increasing atomic number (Li+ < Na+ < K+ < Ca2+). High adsorption selectivity (CO2/N2 IAST selectivity (15:85) = 539.5) is also achieved for CO2 over N2 at room temperature. This approach offers a feasible method to improve CO2 capture capacity, especially at low concentrations.

chemistry, multidisciplinary,crystallography

Metal-organic Framework Based on Flexible Ligands and CoII-CoII-CoII System: Selective Gas Adsorption and Magnetic Properties

Metal–organic framework based on flexible ligands and Co II –Co II –Co II system: selective gas adsorption and magnetic properties

A new anionic metal–organic framework showing tunable emission by lanthanide(III) doping and highly selective CO2 adsorption properties

A metal–organic framework that exhibits CO2-induced transitions between paramagnetism and ferrimagnetism

A 2D flexible cobalt-MOF: reversible solid-state structural transformation, two-step and gate-opening adsorption behaviours, and selective adsorption of C 2 H 2 over CO 2 and CH 4

The Selective CO2 Adsorption and Photothermal Conversion Study of an Azo-Based Cobalt-MOF Material

Tetrazole-based Porous Metal-Organic Frameworks for Selective CO2 Adsorption and Isomerization Studies.

A 2-Fold Interpenetrated Nitrogen-Rich Metal–Organic Framework: Dye Adsorption and CO 2 Capture and Conversion

Cobalt-Based Metal–Organic Frameworks for Adsorption of CO 2 and C 2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

Microporous Cobalt(II)-Organic Framework with Open O-Donor Sites for Effective C2H2 Storage and C2H2/CO2 Separation at Room Temperature

Cobalt-Based Metal-Organic Frameworks for Adsorption of CO2 and C2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

A 2D Metal–organic Framework Composed of a Bi-Functional Ligand with Ultra-Micropores for Post-Combustion CO2 Capture

Selective Adsorption of CO2/CH4 and CO2/N2 Within a Charged Metal–organic Framework

Pore functionalization, single-crystal transformation and selective CO2 adsorption in chemical stable pillared-layer Co(II) based metal–organic framework

"Click''-Extended Nitrogen-Rich Metal-Organic Frameworks and Their High Performance in Co2-Selective Capture

Porous Metal-Organic Frameworks with Chelating Multiamine Sites for Selective Adsorption and Chemical Conversion of Carbon Dioxide.

Metal‐Organic Frameworks: Bimetallic Metal‐Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion (small 17/2016)

Molecular Engineering in a Family of Pillared-Layered Metal-Organic Frameworks for Tuning Gas Adsorption Behavior.

Tetrazole-Viologen-based Flexible Microporous Metal-Organic Framework with High CO2 Selective Uptake.

Nitrogen-enriched flexible metal-organic framework for CO2 adsorption

A Series of Cation-Modified Robust Zirconium-Based Metal-Organic Frameworks for Carbon Dioxide Capture