Experimental and Simulated Study on Mass and Heat Transfer of Falling Film Evaporator for Ammonia-Containing Wastewater

Mengyue Zhou,Zhigang Tang,Dong Guo,Linyan Li,Xiaotong Chen

DOI: https://doi.org/10.2139/ssrn.3989598

2021-01-01

SSRN Electronic Journal

Abstract:The evaporation and distillation of ammonia-containing wastewater are very important processes in industrial production, which exist in many industrial processes. Compared with the conventional tower type for ammonia evaporation, the falling film evaporator has the advantages of higher heat transfer efficiency, lower transfer heating loss and short residence time of material. In this work, a pilot system was established to study the heat and mass transfer of ammonia evaporation. The falling film evaporation process was modeled, and the expressions of apparent mass transfer coefficient and apparent heat transfer coefficient were obtained by regression with R 2 greater than 0.9. The influence of heating medium temperature, operating pressure, and film wiper speed on the heat transfer coefficient and mass transfer coefficient were investigated. Results revealed that heat transfer coefficient at 358.65K, at 200 rpm, at 5 kPa is 1.62, 1.25 and 3.93 times higher than that at 331.2K, at 100 rpm, at 35 kPa, respectively. The mass transfer coefficient of ammonia at 358.65K, at 200 rpm, at 5 kPa is 6.40, 8.00 and 10.67 times higher than that at 331.20K, at 100 rpm, at 35 kPa, respectively. This model can provide guidance for larger-scale production in industry.