Abstract:The presence of cold walls in spark-ignition (SI) engines could induce the interaction with end-gas autoignition. This interaction is numerically studied in the current work considering detailed chemistry and transport, with emphasis on near-wall flame structures and dynamics, as well as autoignition-affected wall heat flux. Two alternative fuels, hydrogen, and dimethyl ether (DME), are considered. In hydrogen/air mixtures, autoignition first develops in the end-gas and leaves an unburnt near-wall region. The combustion mode in this region then sequentially behaves as spontaneous ignition, laminar flame, and low-to-intermediate temperature reaction. Correspondingly, the contribution of diffusion and convection in the energy budget respectively increases and decreases as the reaction front moves towards the wall. End-gas autoignition also introduces strong pressure waves propagating back-and-forth, which subsequently lead to multiple local maxima on the temporal evolution of wall heat flux. Consequently, the maximum wall heat flux no longer changes monotonically with both the wall temperature and the quenching distance. Furthermore, the role of low-temperature chemistry (LTC) is studied using DME/air mixtures, which exhibits typical multi-stage heat release and Negative Temperature Coefficient (NTC) behaviors. It is also noted that, the influence of pressure wave is minimal when the unburnt mixtures have relatively low energy density, such as at off-stoichiometric conditions and/or lower initial pressures. Specifically: consistent to distinct three-stage homogeneous ignition at certain fuel-lean conditions (ϕ = 0.25) and intermediate initial temperature (typically around T 0 = 600–750 K), in the corresponding 1D case three-stage end-gas autoignition respectively evolves into the near-wall cool, warm and hot flame; in the case at relatively low initial pressures, only the first-stage autoignition occurs in the end-gas, and as such LTC slightly increases the wall heat flux and advances flame quenching. As the reactivity of unburnt mixtures becomes higher, LTC and HTC respectively introduce strong and weak knocking combustion. Multiple weak and strong local maxima are observed in the temporal evolution of wall heat flux, both of which changes non-monotonically with the wall temperature.

Numerical Study of Wall-Impinging Ignition at Different Wall Distances for Cold Start of Heavy-Duty Diesel Engine

Wall-impinging laminar premixed n-dodecane flames under autoignitive conditions

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Numerical study of wall cooling effects on diesel spray combustion characteristics under different ambient conditions

Wall Temperature Effects on Ignition Characteristics of Liquid-phase Spray Impingement for Heavy-duty Diesel Engine at Low Temperatures

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Experimental study on spray impingement during diesel engine starting

Experimental and numerical studies on fuel-film combustion and wall thermal effect of diesel spray

Visualization on spray and flame characteristics of wall-impinging spray under marine diesel engine conditions

New Insights into Abnormal Combustion Phenomena Induced by Diesel Spray-Wall Impingement under Engine-Relevant Conditions

Optical and numerical study on the effect of wall impingement on passive jet ignition characteristics of methane/air mixture

Experimental investigation of atomization characteristics at low temperature environments during diesel engine cold start

Numerical study on the effect of multiple injection strategies on ignition processes for low-temperature diesel spray

Study on the forming process of the cylinder wall fuel film and the piston top land ablation mechanism of a medium speed marine diesel engine under cold start condition

Interaction of end-gas autoignition and cold wall in closed chamber

Study of Visualization Experiment on the Influence of Injector Nozzle Diameter on Diesel Engine Spray Ignition and Combustion Characteristics

An Experimental and Numerical Study of Diesel Spray Impingement on a Flat Plate

Experimental study on diesel fuel injection characteristics under cold start conditions with single and split injection strategies

Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model

Optical experiments on diesel knock for high altitude engines under spray impingement conditions

Effect of wall-impingement distance on fuel adhesion characteristics of split injection spray under cross-flow condition