Abstract:Foam fluids are widely used in petroleum engineering, but long-standing foam stability problems have limited the effectiveness of their use. The study explores the synergistic effects and influencing factors of SiO2 nanoparticles (SiO2-NPs) with different wettability properties and three different surfactants. The paper investigates the foaming performance of different types of surfactants and analyzes and compares the stability of foam after adding hydrophilic and hydrophobic SiO2-NPs from macroscopic as well as microscopic perspectives, and the effects of temperature and inorganic salts on the stability of mixed solutions. The experimental results show that: 1) hydrophilic nanoparticles can significantly enhance the foam stability of amphoteric surfactants, with a small increase in the foam stability of anionic and cationic surfactants; 2) The concentration of nanoparticles did not have a significant effect on the stability of the cationic surfactants and this conclusion was verified in the experimental results of the surface tension measured below;3) The cationic surfactants showed better temperature resistance at temperatures of 50–90 °C. Both amphoteric surfactant solutions with the addition of hydrophilic SiO2-NPs or hydrophobic SiO2-NPs significantly improved the temperature resistance of the foam at high temperatures. The anionic surfactant solution with hydrophobic SiO2-NPs did not enhance the solution temperature resistance; 4) The surface tension of the surfactant solution gradually increases with increasing concentration of hydrophilic or hydrophobic SiO2-NPs and then levels off; 5) the hydrophilic SiO2-NPs had a significant effect on the salt tolerance of the anionic and amphoteric surfactant solutions. The salt tolerance of cationic surfactant solutions with hydrophobic SiO2-NPs was better than that of surfactants with hydrophilic SiO2-NPs.

Organic Foams Stabilized by Biphenyl-bridged Organosilica Particles.

Stabilization of Pickering Foams by High-Aspect-Ratio Nano-Sheets

Synthesis of carboxyl group functionalized polyhedral oligomeric silsesquioxane for fabricating ultrastable foams driven by high temperature and salinity

A Convenient and Versatile Strategy for the Functionalization of Silica Foams Using High Internal Phase Emulsion Templates As Microreactors.

Foam formation in aqueous-ethanol system triggered by the ABA triblock siloxane surfactant

Investigation on Polyimide/Silica Hybrid Foams and Their Erosion Resistance to Atomic Oxygen

Molecular Dynamics Simulation of the Synergistic Effect of Alkali/Surfactant/Polymer on the Formation and Stabilization of Water-Based Foam Systems

Preparation, Characterization and Application of Polyether and Long-Chain Alkyl Co-Modified Polydimethylsiloxane

Tunable Stability of Oil-Containing Foam Systems with Different Concentrations of SDS and Hydrophobic Silica Nanoparticles

Surface activity, aggregation behavior, and foam properties of polyether-modified fluorosilicone surfactants

Foam Stabilized by the Mixture of Silicone and Hydrocarbon Surfactants in the Presence of Nanoparticles with Different Specific Surface Area

Synthesis of Organosilicon Foam Stabilizer for Lower Density Flexible PU Foam

Aggregation Behavior of Polyether Based Siloxane Surfactants in Aqueous Solutions: Effect of Alkyl Groups and Steric Hindrance.

Structure–Behavior–Property Relationship Study of Surfactants as Foam Stabilizers Explored by Experimental and Molecular Simulation Approaches

Surface and aggregation behavior of butynediol tetraethoxylate-based trisiloxanes

Synthesis and Characterization of Polystyrene/Nanosilica Organic-Inorganic Hybrid

Experimental Study on Foam Properties of Mixtures of Organic Silicon and Hydrocarbon Surfactants Regulated by Nano-SiO2 Particles

Foams Stabilized by Tricationic Amphiphilic Surfactants

Synergistic improvement of foam stability with SiO2 nanoparticles (SiO2-NPs) and different surfactants

Organic-Inorganic Hybridization For The Synthesis Of Robust In Situ Hydrophobic Polypropylsilsesquioxane Aerogels With Fast Oil Absorption Properties

Efficient synthesis of POSS based amphiphilic nanoparticles via thiol-ene "click" reaction to improve foam stability