Abstract:For the development of spacecraft with long-servicing life in low earth orbit (LEO), high-temperature resistant polymer films with long-term atomic oxygen (AO) resistant features are highly desired. The relatively poor AO resistance of standard polyimide (PI) films greatly limited their applications in LEO spacecraft. In this work, we successfully prepared a series of novel AO resistant PI composite films containing nanocaged polyhedral oligomeric silsesquioxane (POSS) components in both the PI matrix and the fillers. The POSS-containing PI matrix film was prepared from a POSS-substituted aromatic diamine, N-[(heptaisobutyl-POSS)propyl]-3,5-diaminobenzamide (DABA-POSS) and a common aromatic diamine, 4,4′-oxydianline (ODA) and the aromatic dianhydride, pyromellitic dianhydride (PMDA) by a two-step thermal imidization procedure. The POSS-containing filler, trisilanolphenyl POSS (TSP-POSS) was added with the fixed proportion of 20 wt% in the final films. Incorporation of TSP-POSS additive apparently improved the thermal stability, but decreased the high-temperature dimensional stable nature of the PI composite films. The 5% weight loss temperature (T5%) of POSS-PI-20 with 20 wt% of DABA-POSS is 564 °C, and its coefficient of linear thermal expansion (CTE) is 81.0 × 10−6/K. The former is 16 °C lower and the latter was 20.0 × 10−6/K higher than those of the POSS-PI-10 film (T5% = 580 °C, CTE = 61.0 × 10−6/K), respectively. POSS components endowed the PI composite films excellent AO resistance and self-healing characteristics in AO environments. POSS-PI-30 exhibits the lowest AO erosion yield (Es) of 1.64 × 10−26 cm3/atom under AO exposure with a flux of 2.51 × 1021 atoms/cm2, which is more than two orders of magnitude lower than the referenced PI (PMDA-ODA) film. Inert silica or silicate passivation layers were detected on the surface of the PI composite films exposed to AO.

Investigation on Polyimide/Silica Hybrid Foams and Their Erosion Resistance to Atomic Oxygen

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Atomic oxygen resistance of polyimide/silicon hybrid thin films with different compositions and architectures

Preparation of Two-Component Hybrid Polyimide Film for Atomic Oxygen Erosion Resistance

Study On The Atomic Oxygen Erosion Resistance Of Poly-Gamma-Aminopropylsiloxane/Methylphenylsilicone Hybrid Films

Preparation and anti atomic oxygen erosion properties of OPPOSS/PI composites

AO-resistant shape memory polyimide/silica composites with excellent thermal stability and mechanical properties

Effect of Nanoparticles and Siloxane Groups on the Atomic Oxygen Erosion Resistance of Copolyimides

Structure And Dielectric Properties Of Polyimide/Silica Nanocomposite Nanofoam Prepared By Solid-State Foaming

Atomic oxygen effects on polymers containing silicon or phosphorus: Mass loss, erosion yield, and surface morphology

Atomic oxygen erosion resistance of polyimide/ZrO2 hybrid films

Atomic Oxygen-Resistant Polyimide Composite Films Containing Nanocaged Polyhedral Oligomeric Silsesquioxane Components in Matrix and Fillers

Preparation and Atomic Oxygen Erosion Resistance of SiOx Coating Formed on Polyimide Film by Plasma Polymer Deposition

Enhanced atomic-oxygen resistance of surface-siliconized polyimide film via an in-situ precursor network at the interface

Lightweight Polyimide/silica Aerogel Composite Foams and Their Derived Carbon Foams for Excellent Flame Retardancy, Thermal Insulation and EMI Shielding Performance

Synthesis, Characterization and Properties of Sio2-Polyimide Hybrid Film

Synthesis and Properties of Atomic-oxygen Resistant Polyimide-SiO2 Nanocomposite Aerogels

Atomic oxygen erosion resistance of aminopropylsilsesquioxane/silicone hybrid coating

Atomic Oxygen Erosion Resistance of Titania–polyimide Hybrid Films Derived from Titanium Tetrabutoxide and Polyamic Acid

The Effects of Atomic Oxygen on Polyimide Resin Matrix Composite Containing Nano-Silicon Dioxide

(3-Glycidoxypropyl)-terminated Silsesquioxane Impact on Nanomechanical Properties of Polyimide Coatings Exposed to Atomic Oxygen