Abstract:The overall aim of this work is to produce a parallel e-beam lithography system using an array of field-emitting microguns independently driven by an active matrix array. This paper will describe the work carried out on optimisation of suitable carbon-based materials for use as the electron emitter source in such a system. From initial experiments on field emission from tetrahedrally bonded amorphous carbon (ta-C) and nanocluster carbon films, it has been deduced that emission occurs from nanometre-size sp(2) sites within an insulating sp(3) matrix. Hence, we have carried out a series of experiments to investigate the possibility of deliberately producing such sp(2) regions within a predominantly sp(3) matrix using e-beam irradiation, high energy ion beam irradiation and post deposition plasma processing of ta-C. Unfortunately, although the use of I GeV uranium ions successfully produced arrays of sp(2) rich regions on the required nanometre scale, no preferential field emission from such sites could be obtained. The final series of experiments were thence carried out using aligned carbon nanotubes (CNTs) as the electron sources. Results on aligned CNTs, grown using a dc plasma technique and a Ni catalyst, are presented. Both the diameter and length of the CNTs are dependent upon the thickness of the catalytic layer used. Field emission from an array of CNTs was obtained.

RF modulation of a 3 mA beam current from a carbon nanotube cathode

Carbon Nanotube Cathodes As Electron Sources for Microwave Amplifiers

Theoretical Research on A Multibeam-Modulated Electron Gun Based on Carbon Nanotube Cold Cathodes

High Current Density Nanofilament Cathodes for Microwave Amplifiers

Aligned Carbon Nanotubes/Fibers for Applications in Vacuum Microwave Amplifiers

Design And Simulation Of A Multi-Sheet Beam Terahertz Radiation Source Based On Carbon-Nanotube Cold Cathode

Microwave Devices - Carbon Nanotubes As Cold Cathodes

Research on a magnetron injection electron gun based on carbon nanotube cold cathode

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Fabrication and electrical characteristics of carbon nanotube-based microcathodes for use in a parallel electron-beam lithography system

Carbon Nanotubes As Cold Cathodes

Carbon Nanotubes As Field Emission Sources

A Miniaturized Single-Wall Carbon Nanotubes Field Emission Cathode With RF Excited by Coaxial Resonant Cavity

Field-emission triodes with integrated anodes

Carbon Nanotubes/nanofibers for Microwave Amplifiers and Parallel E-Beam Lithography

A Modulated Field Emission from Carbon Nanotubes Cold Cathode Cavity Resonator in L Band Frequency

An On-Chip Vacuum Triode Based on Thermionic Electron Emission from Super-Aligned Carbon Nanotube Films

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Carbon films for use as the electron source in a parallel e-beam lithography system

A Carbon Nanotube Cold Cathode Microwave Electron Gun

Achieving High-Current Carbon Nanotube Emitters