Abstract:Although 4Ce4YSZ has high corrosion resistance, it faces challenges concerning its sinterability and ionic conductivity. Therefore, we studied destabilization behavior caused by corrosion and oxygen vacancy ordering according to ZnO doping. Powders of (4Ce4YSZ)1−x(ZnO)x (x = 0.5, 1, 2, 4 mol%) were synthesized using the sol-gel method. With the addition of ZnO, the cubic phase increased, and secondary phases were not observed. The (111) peak showed a higher angle shift in ZnO-doped 4Ce4YSZ compared to 4Ce4YSZ, and TEM-SAED revealed a reduction in the spacing of the (011)t plane, suggesting lattice contraction due to the substitution of the smaller Zn2+ (60 Å) for Zr4+ (84 Å) in the lattice. The local atomic structure analysis was conducted using EXAFS to investigate the oxygen vacancy ordering behavior. Zr K-edge Fourier transform data revealed a decrease in the Zr-O1 peak intensity with an increasing amount of ZnO doping, indicating an increase in oxygen vacancies. The Zr-O1 peak position shifted to the right, leading to an increase in the Zr-O1 interatomic distance. In the Y K-edge Fourier transform data, the Y-O1 peak intensity did not decrease, and there was little variation in the Y-O1 interatomic distance. These results suggest that the oxygen vacancies formed due to ZnO doping are located in the neighboring oxygen shell of Zn, rather than in the neighboring oxygen shells of Y and Zr. Impedance measurements were conducted to measure the conductivity, and as the amount of ZnO doping increased, the total conductivity increased, while the activation energy decreased. The increase in oxygen vacancies by ZnO doping contributed to the enhancement of conductivity, and it is considered that these created oxygen vacancies did not interact with Zn2+ and did not form defect associations. Fluoride-based molten salts were introduced to the specimens to assess the corrosion behavior in a molten salt environment. Yttrium depletion layers (YDLs) were formed on the surfaces of all specimens due to the leaching of yttrium. However, Ce remained relatively stable at the interface according to EDS line scans, suggesting a reduction in the phase transformation (cubic, tetragonal to monoclinic) typically associated with yttrium leaching in YSZ.

Energetics of Cerium–Zirconium Substitution in the xCe0.8Y0.2O1.9−(1−x)Zr0.8Y0.2O1.9 System

Oxygen Vacancy Ordering and Molten Salt Corrosion Behavior of ZnO-Doped CeYSZ for Solid Oxide Membranes

Influence of Zr substitution on the electrical and dielectric properties of the Ce0.6-xZrxY0.4O2-δ solid solutions

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Synthesis, Characterization and Electrical Properties of the New Solid Electrolyte Materials Ce6 Xerxmoo15- (0.0 <x< 1.5)

Enhanced Thermal Stability and Oxygen Storage Capacity for CexZr1-xO2 (x = 0.4−0.6) Solid Solutions by Hydrothermally Homogenous Doping of Trivalent Rare Earths

Predicting ionic conductivity of solid oxide fuel cell electrolyte from first principles

Insight into the Mechanism of the Ionic Conductivity for Ln-Doped Ceria (ln = La, Pr, Nd, Pm, Sm, Gd, Tb, Dy, Ho, Er, and Tm) Through First-Principles Calculation.

Defect and Transport Model of Ceria–Zirconia Solid Solutions: Ce0.8Zr0.2O2−δ—An Electrical Conductivity Study

Yttrium‐Doped Barium Zirconate‐Cerate Solid Solution as Proton Conducting Electrolyte: Why Higher Cerium Concentration Leads to Better Performance for Fuel Cells and Electrolysis Cells

Urea-Based Hydrothermally Derived Homogeneous Nanostructured Ce1-Xzrxo2 (X=0-0.8) Solid Solutions: A Strong Correlation Between Oxygen Storage Capacity and Lattice Strain

Effect of Yttrium Doping on Oxygen Storage Capacity of Ce_(0.33)Zr_(0.67)O_2

Atomic-scale insights into electro-steric substitutional chemistry of cerium oxide

Enhanced Energy Storage Density and Its Variation Tendency in CaZrxTi1−xO3 Ceramics

Ternary co-doped ytterbium-scandium stabilized zirconia electrolyte for solid oxide fuel cells

High Performance Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

Effect of ZnO on the Intermediate-Temperature Electrochemical Properties of Gd0.1Ln0.1Ce0.8O2-α (ln = Er, Yb) for Solid Oxide Membrane Fuel Cells

Novel SrCe1 − Xybxo3 − Α-(Na/k)cl Composite Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

Non-Stoichiometry in Oxide Thin Films Operating under Anodic Conditions: A Chemical Capacitance Study of the Praseodymium-Cerium Oxide System

Basic properties of low thermal expansion coefficient (Y0.5Ca0.5)1−xInxBaCo3ZnO7+δ (x=0, 0.1, 0.2, 0.3) solid solutions for solid oxide fuel cell cathode materials

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells