Abstract:In‐situ polymerization modified calcium sulfate whiskers and their application in PP composites research. Calcium sulfate whiskers (CSW) exhibit significant surface polarity and high surface energy, leading to aggregation when directly incorporated into polymer matrices, significantly affecting the mechanical properties of the composites. Sodium oleate (SO) was used to modify CSW, introducing –C=C– active groups on the surface, followed by in‐situ graft polymerization of sodium oleate‐modified CSW (SO‐CSW) with methyl methacrylate (MMA) to prepare CSW‐g‐PMMA composites. The modification mechanism of SO and PMMA on CSW, as well as the surface modification effects on CSW, were studied using DRIFT, XRD, XPS and TEM. The results show that oleic acid ions adsorb onto the surface of CSW in two forms. One is chemisorption, in which the oleic acid ions are adsorbed on the calcium ions site on the surface of CSW in a bridging way. The other is physical adsorption, oleic acid ions and dissolved calcium ions in the form of precipitation adsorbed on the outermost layer of CSW. After in‐situ polymerization, PMMA was successfully grafted onto the surface of CSW, and the thickness of the surface PMMA coating layer was approximately 67 nm. CSW‐g‐PMMA was used as a filler in the melt blending with polypropylene (PP) to prepare PP composites. CSW‐g‐PMMA mainly toughens and enhances the mechanical properties of PP composites in the form of crack bridging, crack deflection and pull‐out effect. Highlights The mechanism of sodium oleate modified calcium sulfate whisker (CSW) has been investigated. One is chemical adsorption that the oleic acid ions are adsorbed on the calcium ions site on the CSW surface in a bridge way. The other is physical adsorption that oleic acid ions and dissolved calcium ions are adsorbed in the form of precipitation on the outer layer of CSW. After the modification of sodium oleate, the active group –C=C– was introduced on the surface of CSW, and then the PMMA long chain polymer was grafted with an in‐situ polymerization to form a PMMA coating layer with a thickness of about 67 nm, which significantly improved the hydrophobicity of CSW surface. After modification with sodium oleate and PMMA grafting, the modified CSW significantly toughened and enhanced the mechanical properties of PP composites in the form of crack bridging, crack deflection and pull‐out effect.

Micro-structrue and properties of PP composites filled magnesium hydroxide whiskers modified by in-situ copolymerization

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Polyolefin Composites Filled with Magnesium Hydroxide

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

The Dielectric and Mechanical Properties of A Potassium-Titanate-Whisker-Reinforced Pp/Pa Blend

In‐situ polymerization modified calcium sulfate whiskers and their application in PP composites research

Study on Suspension Graft Polymerization of MMA onto Nano-sized Basic Magnesium Chloride Whisker Surface in Methanol/Water Disperse Medium

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Surface modification of magnesium hydroxide sulfate hydrate whiskers and its toughness and reinforcement for polyvinyl chloride

Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization

Preparation of PMMA Grafted Calcium Carbonate Whiskers and Its Reinforcement Effect in PVC

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Performance of Polyethylene/Magnesium Hydroxide Sulfate Hydrate-Whisker Composites

Microstructure and Mechanical Properties of Polycaprolactone/Calcium Sulfate Particle and Whisker Composites

Preparation and Properties of Modified Magnesium Borate Whisker/SBR Composites

Effects of Macromolecular Compatibilizers Containing Epoxy Groups on the Properties of Linear Low-Density Polyethylene/Magnesium Hydroxide Composites

Study on Preparation and Properties of Modified Calcium Sulfate Whisker Filled PP/EPDM Composite

Mechanical properties and flame retardancy of surface modified magnesium oxysulfate (5Mg(OH)2·MgSO4·3H2O) whisker for polypropylene composites

Modification of Polypropylene Composites Containing Potassium Titanate Whisker and Talcum

Influence of magnesium and calcium sulfate whisker on crystallization characteristics of poly (butylene adipate-co-terephthalate) and Poly(butylene succinate)