Abstract:The efficiency of heat transfer will be significantly reduced if airborne particles deposit in the heat transfer channel. Better understandings on particle deposition characteristics in heat exchanger channel are crucial for the energy efficiency improvement. In this study, the particle deposition in a three-dimensional dimpled rough channel was simulated using the Reynolds stress model (RSM) and discrete particle model (DPM). For the turbulent diffusion of particles, the random walk model (DRW) was employed, and for the particle–wall contact, user-defined functions(UDF) are developed in this study to achieve motions such as bouncing and deposition of particles. Grid independence testing and numerical verification were followed by an analysis and study of the flow structures, secondary flow, temperature distribution, and particle deposition distribution in the dimpled rough channel. On the turbulent structure and particle deposition characteristics, the impacts of several significant parameters, including particle size, airflow velocity, the ratio of dimple depth to inner diameter ( h/d ), and the ratio of inner diameter of dimple to distance between dimples ( d/s ), were examined. The findings demonstrate that the primary mechanisms influencing the deposition characteristics of particles in dimpled channels are gravity deposition, thermophoresis force distribution, turbulence structure, secondary flow, and particle inertia, and the effects of these mechanisms change significantly with particle size. For small particles ( d p ≤ 10 μm), the presence of dimples will encourage deposition; however, for large particles ( d p > 10 μm), the presence of dimples will only have a little impact on the distribution of where the particles are deposited.

CFD ANALYSIS ON PRESSURE DROP OF DIMPLE JACKETED HEAT EXCHANGER IN CHEMICAL POST-PROCESSING INTEGRATED EQUIPMENT

Effects of Dimple Cone Angles on Heat Transfer and Pressure Drop in a Dimple Jacketed Heat Exchanger

Heat Transfer Analysis on Dimple Geometries and Arrangements in Dimple Jacketed Heat Exchanger

Coupled Electrostatic-Structures-Fluidic Analysis of a Nozzle/Diffuser Diaphragm Micropump

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Experiment and finite element analysis on pressure distention of laser welding dimple jacket

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Flow Boiling in Dimpled Plate Heat Exchangers with Different Geometric Parameters: Analysis of Asymmetric Channels

Evaluation of thermal hydraulic flow and enhancement of heat performance in different 3D dimpled tube configurations according to design of experiment analysis

CFD ANALYSIS ON FLOW CHARACTERISTICS OF PERFORATED PLATE IN MULTI-STAGE HIGH PRESSURE REDUCING VALVE

Numerical and Experimental Investigation of Flow and Heat Transfer in Heat Exchanger Channels with Different Dimples Geometries

Effects of Distribution Channel Dimensions on Flow Distribution and Pressure Drop in a Plate‐Fin Heat Exchanger

The Structural Optimization of Dimple in Microchannel for Heat Transfer Enhancement

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

CFD Simulation Investigation on the Flow Field Distribution Pattern under Different Operating Environment Pressures in a Jet Impingement-Negative Pressure Reactor

Heat Transfer and Flow Friction Characteristics of Dimple-Type Heat Exchanger in Axial Piston Pump

Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN

Study the influence of concavity shapes on augmentation of heat‐transfer performance, pressure field, and fluid pattern in three‐dimensional pipe

Effect of elliptical dimples on heat transfer performance in a shell and tube heat exchanger

Numerical simulation of turbulent flow and particle deposition in heat transfer channels with concave dimples