Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

175km repeaterless BOTDA with hybrid 2nd- and 3rd-order Raman random fiber laser amplification

175-Km Repeaterless BOTDA with Hybrid High-Order Random Fiber Laser Amplification

154.4Km Botda Based on Hybrid Distributed Raman Amplifications

142.2Km Botda Based on Ultra-Long Fiber Laser with A Ring Cavity

Hybrid Distributed Raman Amplification Combining Random Fiber Laser Based 2Nd-Order and Low-Noise LD Based 1St-Order Pumping

Hybrid Rsoa and Fibre Raman Amplified Long Reach Feeder Link for Wimax-On-Fibre

Towards Fully Distributed Amplification And High-Performance Long-Range Distributed Sensing Based On Random Fiber Laser

157km BOTDA with pulse coding and image processing

175km Phase-Sensitive Otdr With Hybrid Distributed Amplification

Distributed Raman Amplification Using Ultra-Long Fiber Laser with a Ring Cavity: Characteristics and Sensing Application.

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

Long-distance Optical Fiber Transmission System Based on Hybrid Raman Amplification

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Experimental Demonstration on 2.5m Spatial Resolution and 1oc Temperature Uncertainty over 74.6km BOTDA with Combined Raman Amplification and Optical Pulse Coding

Ultralong Raman Fiber Laser and Sensor with Optimized Remotely Optical Pump Amplification

Ultra-Long-Distance Hybrid Botda/Phi-Otdr

100Km Quasi-lossless Fiber-optic Transmission with a Novel Cascaded Random Raman Fiber Laser

Ultralong Single‐Ended Random Fiber Laser and Sensor

100 Km Brillouin Optical Time Domain Analyzer Based on Radom Distributed Feedback Fiber Laser Pumping

An 86 km direct detection POTDR with co-pumping 2nd Raman amplification based on random fiber lasing