Abstract:Residual unreacted Cr(VI) incorporated in ferrous-sulfate-reduced chromite ore processing residue (rCOPR) can be slowly released during deposition, posing a significant threat to the environment. Recent studies indicate that such Cr(VI) mainly exists within the nano-sized ion channels of ettringite, forming Cr(VI)-ettringite. Therefore, efficient extraction and recovery of the incorporated Cr(VI) from rCOPR, especially from Cr(VI)-ettringite, are urgently needed in order to eliminate the long-term hazardous effects of rCOPR. In this work, NaHCO3 was used to extract Cr(VI) from rCOPR with or without hydrothermal treatment, and the process under hydrothermal conditions (up to 120 degrees C) was able to nearly completely (>98%) extract Cr(VI). The results of X-ray diffraction, aberration-corrected scanning transmission electron microscopy, and X-ray absorption fine structure spectroscopy analyses were combined to elucidate the underlying extraction mechanisms. First, CO32- exchanged with CrO42- in the ion channels of Cr(VI)-ettringite, transforming ettringite into nano-CaCO3. This transformation effectively destroyed the ion-channel structure of Cr(VI)-ettringite, causing the release of incorporated CrO42-. However, in this stage, some CrO42- ions were still strongly adsorbed onto the nano-CaCO3, leading to the incomplete extraction of Cr(VI). Furthermore, the hydrothermal treatment was demonstrated to be essential to the acceleration of the nano-CaCO3 crystal growth to achieve the full Cr(VI) extraction. This novel strategy provides a viable approach to eliminate the pollution associated with the slow release of Cr(VI) from rCOPR in a fast and cost-effective manner. Environmental significance Contamination of soils and groundwater due to Cr(VI) in COPR and rCOPR constitutes a real environmental threat. With COPR, reduction and immobilization of Cr(VI) into the less toxic Cr(III), followed by deposition, have been widely used to remediate millions of tons of COPR worldwide with much success. However, the residual unreacted Cr(VI) incorporated in the mineral phases of rCOPR, which is mainly stored within the nano-sized ion channels of Cr(VI)-ettringite, can slowly leach out during deposition, causing a global concern for the long-term environmental risks of leaching. This work provides a feasible, low-cost approach to completely extract and recover incorporated Cr(VI) from rCOPR and eliminate the environment hazards associated with the long-term release of Cr(VI). This method is simple and feasible, and it can be easily scaled-up. The mechanisms involved in the process include ion exchange within the nano-sized ion channels of ettringite, the formation and growth of nano-CaCO3, and the associated separation of Cr(VI).

Promoted electrokinetic treatment of Cr from chromite ore processing residue with rhamnolipid: Focusing on the reactions on electrolyte-residue interfaces

Biosurfactants Enhanced Electrokinetic Treatment of Cr from Chromite Ore Processing Residue Based on Chemical Fractions

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

An Increasing Cr Recovery from Soil with Catholyte-Enhanced Electrokinetic Remediation: Effects on Voltage Redistribution Throughout Soil Sections

Highly alkaline electrokinetic extraction: Characteristics of chromium mobilization, conversion and transport in high alkalinity soil

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Efficient Removal of Chromium from Soil in a Modified Electrokinetic System Using Iron-Treated Activated Carbon As Third Electrode

Recovering chromium from electroplating sludge using an integrated technology of bipolar membrane electrodialysis and H2O2 oxidation

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Chromium (VI) Retrieval from Chromium Ore Processing Residues by Electrokinetic Treatment

Emulsion Liquid Membrane for the Recovery Chromium (VI) from Effluents Using Monosuccimide and Bisuccimide As Surfactant

Efficient removal of Cr(VI) from contaminated kaolin and anolyte by electrokinetic remediation with foamed iron anode electrode and acetic acid electrolyte

Effect of Chemical Additives on Electrokinetic Remediation of Cr-contaminated Soil Coupled with a Permeable Reactive Barrier.

Permeable Reactive Composite Approaching Cathode Enhanced Cr Removal in Soil Using the Byproduct of Electrokinetic Technology: Emphasized Energy Utilization Efficiency

Efficient immobilization and utilization of chromite ore processing residue via hydrothermally constructing spinel phase Fe2+(Cr3+X, Fe3+2-x)O4 and its magnetic separation

Efficient extraction of slowly-released Cr(VI) from nano-sized ion channels in Cr(VI)-ettringite from reduced chromite ore processing residue

Simultaneous Oxidation of Cr(III) and Extraction of Cr(VI) from Chromite Ore Processing Residue by Silicate-Assisted Hydrothermal Treatment

Effect of electrolyte, potential gradient and treatment time on remediation of hexavalent chromium contaminated soil by electrokinetic remediation and adsorption

Extraction of Cr(VI) from Chromite Ore Processing Residue Via Hydrothermal-Assisted Phase Transformation

Environmentally Friendly Chromium Electrodeposition: Effect Of Pre-Electrolysis On A Cr(Iii) Bath In An Anion-Exchange Membrane Reactor