V-doped T-Nb2O5 Toward High-Performance Mg2+/Li+ Hybrid Ion Batteries

Huihuang Huang,Guangyu Zhao,Xianbo Yu,Xiaojie Shen,Ming Wang,Xiaoming Bai,Naiqing Zhang

DOI: https://doi.org/10.1039/d1ta09231f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:V-doped T-Nb2O5 possesses reduced band gap, boosted ionic transportation and superior structural stability, resulting in excellent rate performance and cycling stability.

What problem does this paper attempt to address?

V-doped T-Nb 2 O 5 toward high-performance Mg 2+ /Li + hybrid ion batteries

Huihuang Huang,Guangyu Zhao,Xianbo Yu,Xiaojie Shen,Ming Wang,Xiaoming Bai,Naiqing Zhang

DOI: https://doi.org/10.1039/d1ta09231f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:V-doped T-Nb 2 O 5 possesses reduced band gap, boosted ionic transportation and superior structural stability, resulting in excellent rate performance and cycling stability.

materials science, multidisciplinary,chemistry, physical,energy & fuels
V-doped T-Nb2O5 toward high-performance Mg2+/Li+ hybrid ion batteries

Huihuang Huang,Guangyu Zhao,Xianbo Yu,Xiaojie Shen,Ming Wang,Xiaoming Bai,Naiqing Zhang

DOI: https://doi.org/10.1039/d1ta09231f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:V-doped T-Nb2O5 possesses reduced band gap, boosted ionic transportation and superior structural stability, resulting in excellent rate performance and cycling stability.
Nb-Doped TiO2 with Outstanding Na/Mg-Ion Battery Performance.

Hongwei Bi,Shengli Zhu,Yanqin Liang,Hui Jiang,Zhaoyang Li,Shuilin Wu,Hao Wei,Chuntao Chang,Hao Wang,Zhenduo Cui

DOI: https://doi.org/10.1021/acsomega.2c07689

IF: 4.1

2023-01-01

ACS Omega

Abstract:The group "beyond Li-ion" batteries (Na/Mg-ion batteries) have the advantages of abundant reserves and high theoretical specific capacity. However, the sluggish kinetics resulting from large ion radius (Na+) and polarity (Mg2+) seriously limit the battery performance. Herein, we prepared Nb-doped anatase TiO2 with Ti vacancies (Nb-TiO2) through a simple solvothermal and subsequent calcination process. The Nb doping widens the channels for metal ion diffusion, and the cationic vacancies can act as ion storage sites and improve the electrode conductivity. Thus, Nb-TiO2 exhibits improved performance for rechargeable Na/Mg-ion batteries.
Nb-Doped TiO 2 with Outstanding Na/Mg-Ion Battery Performance

Hongwei Bi,Shengli Zhu,Yanqin Liang,Hui Jiang,Zhaoyang Li,Shuilin Wu,Hao Wei,Chuntao Chang,Hao Wang,Zhenduo Cui

DOI: https://doi.org/10.1021/acsomega.2c07689

IF: 4.1

2023-02-25

ACS Omega

Abstract:The group "beyond Li-ion" batteries (Na/Mg-ion batteries) have the advantages of abundant reserves and high theoretical specific capacity. However, the sluggish kinetics resulting from large ion radius (Na^(+)) and polarity (Mg^(2+)) seriously limit the battery performance. Herein, we prepared Nb-doped anatase TiO(2) with Ti vacancies (Nb-TiO(2)) through a simple solvothermal and subsequent calcination process. The Nb doping widens the channels for metal ion diffusion, and the cationic vacancies...

chemistry, multidisciplinary
Two-Dimensional Nb2o5 Holey Nanosheets Prepared By A Graphene Sacrificial Template Method For High Performance Mg2+/Li+ Hybrid Ion Batteries

Huihuang Huang,Guangyu Zhao,Naiqing Zhang,Kening Sun

DOI: https://doi.org/10.1039/c9nr04937a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Mg2+/Li+ hybrid ion batteries (MLIBs) are regarded as promising candidates for electrical energy devices due to their combination of a fast lithium intercalation cathode and a safe magnesium anode. Herein, two-dimensional Nb2O5 holey nanosheets are synthesized using a graphene oxide sacrificial template method and these are then used as the cathode of a MLIB for the first time. It exhibits a high discharge capacity (195.9 mA h g(-1) at 100 mA g(-1)), excellent rate performance (72.1 mA h g(-1) at 2000 mA g(-1)) and a long cycling life (exhibiting a capacity fading rate of 0.032% per cycle at 2000 mA g(-1) over 1000 cycles). The remarkable electrochemical performance can be attributed to the unique two-dimensional holey nanosheet structure, which is beneficial for improving electronic conductivity and lithium ion conductivity.
Amorphous quantum dots enable V2O5 with superior Mg storage

Huabin Kong,Yancheng Chen,Yihan Wen,Jianxin Ou

DOI: https://doi.org/10.1007/s10853-023-09313-6

IF: 4.5

2024-01-24

Journal of Materials Science

Abstract:Mg-ion batteries (MIBs) possess promising advantages over monovalent Li-ion battery. However, the exploitation of desirable cathode materials encounters the dilemma of sluggish reaction kinetics caused by strong coulomb interaction between Mg 2+ and cathode. Reasonable electrode structure design is of great importance for achieving fast Mg 2+ intercalation kinetics. Herein, a novel configuration composed of sub-5 nm amorphous V 2 O 5 quantum dots and nitrogen-doping carbon nanofibers (a-V 2 O 5 -QDs@NCNFs) was elaborately designed and fabricated. Sub-5 nm QDs provide shorter diffusion path and more storage sites for Mg 2+ . Simultaneously, a large range of disorder states in amorphous structure can provide more open diffusion channels for Mg 2+ transport. In addition, NCNFs play a crucial part in relieving the volumetric strains of V 2 O 5 and maintaining the structural integrity during Mg 2+ insertion/extraction. Reflecting in MIBs, a-V 2 O 5 -QDs@NCNFs deliver ultra-long cycling life (5000 cycles at 5 A g −1 ) and outstanding rate performance (52 mAh g −1 at 20 A g −1 ). This design conception opens up a new route for exploiting high-performance cathode for MIBs.

materials science, multidisciplinary
Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Yali Wen,Lina Shen,Yuling Chen,Qun Zhou,Jie Wang,Juan Wu,Junwei Zheng

DOI: https://doi.org/10.1016/j.jelechem.2023.117296

IF: 4.598

2023-01-01

Journal of Electroanalytical Chemistry

Abstract:Element doping of transition metal (TM) ions is commonly employed in the enhancement of structural and interfacial stability of layered nickel-rich cathode materials to construct high energy density lithium-ion batter-ies. However, one of the main factors for structural evolution and poor electrochemical stability of the layered nickel-rich cathode materials is the inherent Li+/Ni2+ disorder caused by dopants. To regulate the cation mix-ing, herein, the Li-doping is introduced into the TM slabs of the LiNiO2-based materials. Benefited from the charge compensation of the TM layers, the doped Li+ ions lead to the alleviation of the Li+/Ni2+ disorder gen-erated during the synthesis stage and electrochemical charge/discharge cycles. It is demonstrated that proper amount of the doped Li+ ions would enhance the stability of the crystal lattice, improve the Li+ diffusion between electrode and electrolyte, and suppress the microcrack formation in the secondary grains of the mate-rials. This is verified by the synergistic effect of Li/Mn co-doping, in particular, the LiNiO2-based layered mate-rial with 11 mol% Li and 1 mol% Mn exhibits great improvement in long-term cycling stability with capacity retention 71.11% after 200 cycles at 0.5C. The Li-doping strategy might provide a new perspective to the enhancement of structural stability of the layered nickel-rich materials for lithium-ion batteries in the future.
A High-Performance Rechargeable Mg2+/Li+ Hybrid Battery Using One-Dimensional Mesoporous TiO2(B) Nanoflakes As the Cathode

Shuojian Su,Yanna NuLi,Zhenguo Huang,Qi Miao,Jun Yang,Jiulin Wang

DOI: https://doi.org/10.1021/acsami.6b00106

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Mg(2+)/Li(+) hybrid batteries have recently been constructed combining a Mg anode, a Li(+)-intercalation electrode, and an electrolyte containing both Mg(2+) and Li(+). These batteries have been reported to outperform all the previously reported magnesium batteries in terms of specific capacity, cycling stability, and rate capability. Herein, we report the outstanding electrochemical performance of Mg(2+)/Li(+) hybrid batteries consisting of a one-dimensional mesoporous TiO2(B) cathode, a Mg anode, and an electrolyte consisting of 0.5 mol L(-1) Mg(BH4)2 + 1.5 mol L(-1) LiBH4 in tetraglyme. A highly synergetic interaction between Li(+) and Mg(2+) ions toward the pseudo-capacitive reaction is proposed. The hybrid batteries show superior rate performance with 130 mAh g(-1) at 1 C and 115 mAh g(-1) at 2 C, together with excellent cyclability up to 6000 cycles.
Ether–Water Hybrid Electrolyte Contributing to Excellent Mg Ion Storage in Layered Sodium Vanadate

Xiaoke Wang,Xixi Zhang,Gang Zhao,Hu Hong,Zijie Tang,Xijin Xu,Hongfei Li,Chunyi Zhi,Cuiping Han

DOI: https://doi.org/10.1021/acsnano.1c11590

IF: 17.1

2022-03-21

ACS Nano

Abstract:Magnesium ion batteries have potential for large-scale energy storage. However, the high charge density of Mg2+ ions establishes a strong intercalation energy barrier in host materials, causing sluggish diffusion kinetics and structural degradation. Here, we report that the kinetic and dissolution issues connected to cathode materials can be resolved simultaneously using a tetraethylene glycol dimethyl ether (TEGDME)–water hybrid electrolyte. The lubricating and shielding effect of water solvent could boost the swift transport of Mg2+, contributing to a high diffusion coefficient within the sodium vanadate (NaV8O20·nH2O) cathode. Meanwhile, the organic TEGDME component can coordinate with water to diminish its activity, thus providing the hybrid electrolyte with a broad electrochemical window of 3.9 V. More importantly, the TEGDME preferentially amassed at the interface, leading to a robust cathode electrolyte interface layer that suppresses the dissolution of vanadium species. Consequently, the NaV8O20·nH2O cathode achieved a specific capacity of 351 mAh g–1 at 0.3 A g–1 and a long cycle life of 1000 cycles in this hybrid electrolyte. A mechanism study revealed the reversible interaction of Mg2+ during cycles. This organic water hybrid electrolyte is effective for overcoming the difficulty of multivalent ion storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11590.Additional ionic conductivity and Raman characterization of the hybrid electrolyte (Figures S1–S3); additional characterization of NVO materials (TG analysis, SEM images, TEM images, XPS patterns, EDS images, etc.); electrochemical performance including CV curves and charge–discharge curves (Figures S4–S18); Rietveld refinement of the NVO electrode and its performance comparison with literature (Tables S1 and S2) (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Unraveling the Synergistic Effect of Mg and Ti Codoping to Realize an Ordered Structure and Excellent Performance for Sodium-Ion Batteries

Zheng-Yao Li,Xiaobai Ma,Ivan A. Bobrikov,Kai Sun,Hongliang Wang,Linfeng He,Yuqing Li,Dongfeng Chen

DOI: https://doi.org/10.1021/acsami.1c20757

2022-02-04

Abstract:Layered cathodes have been recognized as potential advanced candidates for sodium-ion batteries (SIBs), but the poor electrochemical performance has seriously hindered their further development. Herein, an ordered Na2/3[Ni2/9Mg1/9Mn5/9Ti1/9]O2 (NMMT) is designed and investigated as a high-performance cathode for SIBs through the synergistic effect of Mg and Ti codoping. Compared to the single Mg- or Ti-doped materials, NMMT clearly exhibits superstructure ordering diffraction peaks, and neutron diffraction further confirms that the diffraction peaks can be well indexed by a larger supercell P63, rather than the common unit cell P63/mmc by X-ray diffraction (XRD). High-resolution transmission electron microscopy also approves the ordering arrangement. This material shows an obvious capacity activation process during the first cycles, thus delivering 113 mA h g-1 specific capacity at 0.1 C (close to the theoretical value). Excellent rate capability even at 15 C and cycling stability after 500 cycles between 2.0 and 4.3 V can also be achieved, indicating that an ordered cathode is still promising. Besides, a single-phase reaction mechanism is revealed by ex situ/in situ XRD experiments. This study offers some insights into the material design and characterization of layered oxide cathodes for high-performance SIBs in the future.

materials science, multidisciplinary,nanoscience & nanotechnology
Competition Between Insertion of Li + and Mg 2+ : an Example of TiO 2 -B Nanowires for Mg Rechargeable Batteries and Li + /mg 2+ Hybrid-Ion Batteries

Yuan Meng,Dashuai Wang,Yingjin Wei,Kai Zhu,Yingying Zhao,Xiaofei Bian,Fei Du,Bingbing Liu,Yu Gao,Gang Chen

DOI: https://doi.org/10.1016/j.jpowsour.2017.02.033

IF: 9.2

2017-01-01

Journal of Power Sources

Abstract:Titanium dioxide bronze (TiO2-B) nanowires were prepared by the hydrothermal method and used as the positive electrode for Mg rechargeable batteries and Li+/Mg2+ hybrid-ion batteries. First-principles calculations showed that the diffusion barrier for Mg2+ (0.6 eV) in the TiO2-B lattice was more than twice of that for Li+ (0.3 eV). Electrochemical impedance spectroscopy showed that the charge transfer resistance of TiO2-B in the Mg2+ ion electrolyte was much larger than that in the Li+/Mg2+ hybrid electrolyte. For these reasons, the Mg rechargeable battery showed a small discharge capacity of 35 mAh g(-1) resulting from an electrochemical double-layer capacitive process. In comparison, the TiO2-B nanowires exhibited a large capacity (242 mAh g(-1) at the 20 mA g(-1) current density), high rate capability (114 mAh g(-1) at 1 A g(-1)), and excellent cycle stability in the Li+/Mg2+ hybrid-ion battery. The dominant reaction occurred in the TiO2-B electrode was intercalation of Li+ ions, of which about 74% of the total capacity was attributed to Li+ pseudo-capacitance. (C) 2017 Elsevier B.V. All rights reserved.
Pseudocapacitive Ti-Doped Niobium Pentoxide Nanoflake Structure Design for a Fast Kinetics Anode toward a High-Performance Mg-Ion-Based Dual-Ion Battery

Rui Yang,Fan Zhang,Xin Lei,Yongping Zheng,Guohua Zhao,Yongbing Tang,Chun-Sing Lee

DOI: https://doi.org/10.1021/acsami.0c13045

2020-09-28

Abstract:Magnesium-ion batteries (MIBs) have received increasing attention for next-generation energy storage recently because of the natural abundance, high capacity, and dendrite-free deposition of Mg. However, their applications are hindered by irreversible Mg anode plating in conventional electrolytes and the lack of cathode materials, demonstrating high working voltage, satisfactory Mg2+ diffusivity, and long cycling life. In this work, we first developed a novel magnesium-ion based dual-ion battery (Mg-DIB) by utilizing expanded graphite as the cathode and Ti-doped niobium pentoxide nanoflakes (Ti–Nb2O5 NFs) as the anode. The Ti–Nb2O5 NFs showed hierarchical structures of microspheres with diameters of 4–5 μm assembled by nanoflakes. For the first time, the Mg-ion storage mechanism in Ti–Nb2O5 NFs was investigated. Benefiting from the hierarchical structure design and pseudocapacitive intercalation behavior of Mg ions, the Ti–Nb2O5 NF anode exhibited fast Mg-ion diffusion. Consequently, the Mg-DIB exhibited a high discharge capacity of 93 mA h g–1 at 1 C (1 C corresponding to 100 mA g–1), along with good long-term cycling performance with a capacity retention of 79% at 3 C after 500 cycles. The Mg-DIB also demonstrated a capacity retention of 77% at 5C, indicating its good rate performance. Moreover, the Mg-DIB exhibited a high discharge medium voltage of ∼1.83 V, thus enabling a high energy density of 174 W h kg–1 at 183 W kg–1 and 122 W h kg–1 at a high power density of 845 W kg–1, among the best of the reported magnesium-ion full batteries. Our work provides a new strategy to improve the performance of MIBs and other rechargeable batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13045?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13045</a>.Electrochemical data and calculations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13045/suppl_file/am0c13045_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Improvements in the Electrochemical Performance of Sodium Manganese Oxides by Ti Doping for Aqueous Mg-Ion Batteries

Yongquan Zhang,Tao Ding,Jingshun Wang,Anquan Yao,Changhai Zhang,Tiandong Zhang,Yue Zhang,Yu Feng,Qingguo Chi

DOI: https://doi.org/10.1002/asia.202300542

2023-10-17

Abstract:In recent times, the research on cathode materials for aqueous rechargeable magnesium ion battery has gained significant attention. The focus is on enhancing high-rate performance and cycle stability, which has become the primary research goal. Manganese oxide and its derived Na-Mn-O system have been considered as one of the most promising electrode materials due to its low cost, non-toxicity and stable spatial structure. This work uses hydrothermal method to prepare titanium gradient doped nano sodium manganese oxides, and uses freeze-drying technology to prepare magnesium ion battery cathode materials with high tap density. At the initial current density of 50 mA g-1 , the NMTO-5 material exhibits a high reversible capacity of 231.0 mAh g-1 , even at a current density of 1000 mA g-1 , there is still 122.1 mAh g-1 . It is worth noting that after 180 cycles of charging and discharging at a gradually increasing current density such as 50-1000 mA g-1 , it can still return to the original level after returning to 50 mA g-1 . Excellent electrochemical performance and capacity stability show that NMTO-5 material is a promising electrode material.
Synthesis and Characterization of Mg and Ti Ions Co-Doped Lithium Iron Phosphate and Its Lithium-Ion Batteries

Wang Zhen-Po,Liu Wen,Wang Yue,Zhao Chun-Song,Zhang Shu-Ping,Chen Ji-Tao,Zhou Heng-Hui,Zhang Xin-Xiang

DOI: https://doi.org/10.3866/pku.whxb201207043

2012-01-01

Acta Physico-Chimica Sinica

Abstract:Mg and Ti ions co-doped (Li0.98Mg0.01)(Fe0.98Ti0.01)PO4/C cathode material for lithium-ion batteries was prepared by a solid-state method under N-2 atmosphere. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and galvanostatic charge-discharge test. Results indicated that Mg and Ti ions co-doping remarkably improved the electrochemical performance of LiFePO4, including rate capacity, temperature behavior, and cycling stability. Discharge capacities of 154.7 and 146.9 mAh.g(-1) were obtained at the rates of 0.2C and 1C for half-cell tests, respectively. For 60 Ah full-cell tests, 100% of 1C capacity was maintained even at 3C rate, 89.7% and 63.1% of initial capacity at room temperature were retained at 0 and -20 degrees C, respectively. 89% capacity retention remained after 2000 cycles at room temperature, presenting excellent cycle stability. This investigation suggests that the present co-doping material and the resulting battery possess large discharge capacity and excellent cycling performance, making it applicable in electric vehicle (EV)/hybrid electric vehicle (HEV) and energy storage systems on a large scale.
Hybrid Mg/Li-ion Batteries Enabled by Mg2+/Li+ Co-Intercalation in VS4 Nanodendrites

Yanrong Wang,Caixing Wang,Xu Yi,Yi Hu,Lei Wang,Lianbo Ma,Guoyin Zhu,Tao Chen,Zhong Jin

DOI: https://doi.org/10.1016/j.ensm.2019.06.001

IF: 20.4

2019-01-01

Energy Storage Materials

Abstract:Hybrid Mg2+/Li+ batteries (MLIBs) are very intriguing energy storage devices that combine the advantages of Li and Mg electrochemical redox processes. However, the battery performances of MLIBs in previous researches are usually restricted by the fact that only Li+ ions are participated in the reactions on the cathodes. We propose that this obstacle can be overcome by significantly improving the diffusion/transfer kinetics of highly-polarized divalent Mg2+ ions in the cathode material, so that both Mg2+ and Li+ can be intercalated into the cathode material. Herein, we demonstrate that the electrochemical energy storage capability of MLIBs can be greatly improved by employing vanadium tetrasulfide (VS4) nanodendrites as cathode material. Benefited from the special one-dimensional atomic-chain structure, the VS4 nanodendrites are capable for the simultaneous reversible insertion/extraction of both Mg2+ and Li+ ions with fast diffusion kinetics, high capacity and long cycling stability. The MLIBs assembled with VS4 nanodendrites cathodes exhibit a high reversible capacity of similar to 300 mAh g(-1) at 500 mA g(-1), and a high cycle stability with the capacity maintained at 110 mAh g(-1) after 1500 cycles at 1000 mA g(-1).
Atomic Substitution Enabled Synthesis of Vacancy-Rich Two-Dimensional Black TiO2-x Nanoflakes for High-Performance Rechargeable Magnesium Batteries

Yanrong Wang,Xiaolan Xue,Pingying Liu,Caixing Wang,Xu Yi,Yi Hu,Lianbo Ma,Guoyin Zhu,Renpeng Chen,Tao Chen,Jing Ma,Jie Liu,Zhong Jin

DOI: https://doi.org/10.1021/acsnano.8b06917

IF: 17.1

2018-01-01

ACS Nano

Abstract:Rechargeable magnesium (Mg) batteries assembled with dendrite-free, safe, and earth-abundant metal Mg anodes potentially have the advantages of high theoretical specific capacity and energy density. Nevertheless, owing to the large polarity of divalent Mg2+ ions, the insertion of Mg2+ into electrode materials suffers from sluggish kinetics, which seriously limit the performance of Mg batteries. Herein, we demonstrate an atomic substitution strategy for the controlled preparation of ultrathin black TiO2- x (B-TiO2- x) nanoflakes with rich oxygen vacancies (OVs) and porosity by utilizing ultrathin 2D TiS2 nanoflakes as precursors. We find out that the presence of OVs in B-TiO2- x electrode material can greatly improve the electrochemical performances of rechargeable Mg batteries. Both experimental results and density functional theory simulations confirm that the introduction of OVs can remarkably enhance the electrical conductivity and increase the number of active sites for Mg2+ ion storage. The vacancy-rich B-TiO2- x nanoflakes exhibit high reversible capacity and good capacity retention after long-term cycling at large current densities. It is hoped that this work can provide valuable insights and inspirations on the defect engineering of electrode materials for rechargeable magnesium batteries.
Cobalt-doped TiO2@C hierarchical nanocomposites derived from Ti3C2 MXene as cathodes for hybrid magnesium-lithium batteries

Xiaohui Li,Yakun Tang,Lang Liu,Yue Zhang,Yang Gao,Mao Qian,Wenjie Ma

DOI: https://doi.org/10.1007/s12274-023-5701-3

IF: 9.9

2023-05-24

Nano Research

Abstract:TiO 2 has been explored in hybrid magnesium-lithium batteries (HMLBs) due to the advantages of low self-discharge and small volume expansion during ion insertion. However, how to improve the inherently low ionic and electrical conductivity of TiO 2 is the problem that needs to be solved. In this work, a smart strategy is adopted to prepare cobalt-doped TiO 2 @C (Co 4+ -TiO 2 @C) hierarchical nanocomposite derived from Co(II)(OH) n @Ti 3 C 2 . Compared with TiO 2 @C (without cobalt doping), Co 4+ -TiO 2 @C shows the highest specific capacity (154.7 mAh·g − 1 at 0.1 A·g − 1 after 200 cycles) and extraordinary rate performance in HMLBs. The excellent electrochemical performance of Co 4+ -TiO 2 @C is ascribed to the synergistic effect of the hierarchical structure and cobalt-doping. Both experimental results and density functional theory (DFT) calculation reveal that the cobalt-doping has effectively improved the electronic conductivity and reduced the Li + migration barrier. This work provides a new insight to design TiO 2 -based cathode materials with high-performance in HMLBs.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Sn0.1-Li4Ti5O12/C as a promising cathode material with a large capacity and high rate performance for Mg-Li hybrid batteries

Wei Lin,Xingwei Zuo,Chao Ma,Peng Xia,Haowei Bian,Guobin Liang,Jianbing Hu,Zhongcheng Song,Wutao Mao,Keyan Bao

DOI: https://doi.org/10.1039/d3dt02502k

IF: 4

2023-12-20

Dalton Transactions

Abstract:The development prospects of conventional Li-ion batteries are limited by the paucity of Li resources. Mg-Li Hybrid Batteries (MLIBs) combine the advantages of Li-ion batteries and magnesium batteries. Li+can migrate rapidly in the cathode materials, and the Mg anode has the advantages of dendrite-free. In this paper, Sn0.1-LTO/C composite material doped with Sn4+ and conductive carbon skeleton was prepared by a simple one pot sol-gel method. The doped Sn4+ replaces part of Ti4+ in the crystal lattice, which makes Ti3+ require charge compensation, thus improving the ionic conductivity. The intervention of conductive carbon skeleton further improves the conductivity of Sn0.1-LTO/C composite material. The performance of Sn0.1-LTO/C as the cathode of MLIBs is explored. The initial discharge capacity is 159.1 mAh g-1 at 0.5 C, and it still maintains 105 mAh g-1 after 500 cycles. The excellent electrochemical performance is attributed to a small amount of Sn-doped and the involvement of conductive carbon skeleton, which indicates that Sn0.1-LTO/C composite material provides great potential application in MLIBs.

chemistry, inorganic & nuclear
Mg2+ Doped LiNi1/3Co1/3Mn1/3O2 Hollow Flake-Like Structures with Enhanced Performances Cathodes for Lithium-Ion Batteries

Qiangchao Sun,Hongwei Cheng,Kangning Zhao,Huijie Zhou,Hongbin Zhao,Wenli Yao,Qian Xu,Xionggang Lu

DOI: https://doi.org/10.1002/slct.202000040

2020-01-01

ChemistrySelect

Abstract:LiNi1/3Co1/3Mn1/3O2 ternary cathode is a dominant cathode material for lithium ion batteries due to its relatively stable structure. However, LiNi1/3Co1/3Mn1/3O2 still suffers from the poor rate capability and high cation disorder problems. Herein, the Mg-doped Li(Ni1/3Co1/3Mn1/3)(0.99)Mg0.01O2 cathode materials with hollow flake-like hierarchical fiber structures are successfully synthesized by a facile wet spinning method and the pressing pretreatment of precursor powders on the electrochemical performance is also systematically investigated. The diameter of the pre-synthesized hollow laminar nano-fibers are about 20 mu m and approximately 50 nm in thickness with homogeneous primary nanoparticles (similar to 50 nm). Benefitting from the pillaring effects of inert Mg in the crystal structure and hollow laminar structure, the Li(Ni1/3Co1/3Mn1/3)(0.99)Mg0.01O2 cathodes deliver significantly improved electrochemical performance, achieving high stability discharge specific capacity 178.8 mA h g(-1) with capacity retention of 88 % at 0.5 C (137.5 mA g(-1)) rate after 200 cycles. Moreover, it maintains a high rate capacity of 110 mA h g(-1) even at a current density of 5 C. Based on this work, the conception of combining microstructure design and doping modification can facilitate the development of higher-performance Li-ion battery cathode materials.
V2O5 As the Cathode for Mg2+-Ion Batteries, Preparation and Characterization

Sladjana Martens,Lukas Seidl,Jiwei Ma,Ehab Mostafa,Huinan Si,Xinping Qiu,Ulrich Stimming,Oliver Schneider

DOI: https://doi.org/10.1149/ma2015-03/2/513

2015-01-01

ECS Meeting Abstracts

Abstract:Portable electronics and their commercial use are strongly dependent on the prize, performance and life cycle of the rechargeable batteries. This is even truer for the use in electric vehicles. Currently used Li+-ion batteries represent the state of art technology but there still is a strong demand for further improvement [1,2]. Low abundance and thus high costs for lithium have initiated intensive research for the possible replacement of lithium by other more abundant metals such as magnesium and sodium [3]. Ionic, electronic and chemical characteristics of Li+-, Na+- and Mg2+-ions are different and therefore host materials appropriate for Li+-ions intercalation are not necessarily suitable for Mg2+ and Na+ ions – as well known for the case of graphite anodes. The cathode material V2O5 is one candidate which already showed good performance not just for Li+ but also for Mg2+ and Na+ions [4,5]. Since the morphology and structure of the host materials strongly influence the intercalation process, in this study efforts have been done to synthesize V2O5 with different morphology by applying different synthetic routes and choosing the best material for the metal ion intercalation. V2O5 was prepared by means of sonochemical modification of commercial V2O5 powder, anodization of V metal, electrochemical deposition and hydrothermal synthesis. The obtained materials were characterized by means of scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The sonochemical treatment and electrochemical deposition yielded V2O5-nanofibers, the anodization method V2O5-nanotubes and the hydrothermal synthesis hollow nanospheres of V2O5. The performance of the obtained materials was tested by several electrochemical techniques such are cyclic voltammetry, potentiostatic intermittent titration technique (PITT) and galvanostatic charge/discharge cycles. Li, Na and Mg intercalation were studied. For Li, the rate capability of the sonochemically prepared material was clearly improved compared to commercial, microcrystalline V2O5, but the available voltage at a given discharge capacity was less. The electrodeposited material showed a rather poor performance, while the hollow nanospheres behaved very promising. Also for Na intercalation the latter material showed reasonable performance. First measurements for Mg insertion are shown as well. [1] Dunn B. et al., Electrical Energy Storage for the Grid: A Battery of Choices, Science 334 (2011) 928 [2] Gachot G. et al., Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries, Journal of Power Sources 178 (2008) 409 [3] Besenhard J. et al., Advances in battery technology: rechargeable magnesium batteries and novel negative-electrode materials for lithium ion batteries, ChemPhysChem 3 (2002) 155 [4] Gershinsky G. et al., Electrochemical and Spectroscopic Analysis of Mg2+ Intercalation into Thin Films Electrodes of Layered Oxides: V2O5 and MoO3, Langmuir 29 (2013) 10964 [5] Su D. W. et al., Hierarchical orthorhombic V2O5hollow nanospheres as high performance cathode materials for sodium-ion batteries, J. Mater. Chem. 2 (2014) 11185

V-doped T-Nb2O5 Toward High-Performance Mg2+/Li+ Hybrid Ion Batteries

V-doped T-Nb 2 O 5 toward high-performance Mg 2+ /Li + hybrid ion batteries

V-doped T-Nb<sub>2</sub>O<sub>5</sub> toward high-performance Mg<sup>2+</sup>/Li<sup>+</sup> hybrid ion batteries

Nb-Doped TiO2 with Outstanding Na/Mg-Ion Battery Performance.

Nb-Doped TiO 2 with Outstanding Na/Mg-Ion Battery Performance

Two-Dimensional Nb2o5 Holey Nanosheets Prepared By A Graphene Sacrificial Template Method For High Performance Mg2+/Li+ Hybrid Ion Batteries

Amorphous quantum dots enable V2O5 with superior Mg storage

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

A High-Performance Rechargeable Mg2+/Li+ Hybrid Battery Using One-Dimensional Mesoporous TiO2(B) Nanoflakes As the Cathode

Ether–Water Hybrid Electrolyte Contributing to Excellent Mg Ion Storage in Layered Sodium Vanadate

Unraveling the Synergistic Effect of Mg and Ti Codoping to Realize an Ordered Structure and Excellent Performance for Sodium-Ion Batteries

Competition Between Insertion of Li + and Mg 2+ : an Example of TiO 2 -B Nanowires for Mg Rechargeable Batteries and Li + /mg 2+ Hybrid-Ion Batteries

Pseudocapacitive Ti-Doped Niobium Pentoxide Nanoflake Structure Design for a Fast Kinetics Anode toward a High-Performance Mg-Ion-Based Dual-Ion Battery

Improvements in the Electrochemical Performance of Sodium Manganese Oxides by Ti Doping for Aqueous Mg-Ion Batteries

Synthesis and Characterization of Mg and Ti Ions Co-Doped Lithium Iron Phosphate and Its Lithium-Ion Batteries

Hybrid Mg/Li-ion Batteries Enabled by Mg2+/Li+ Co-Intercalation in VS4 Nanodendrites

Atomic Substitution Enabled Synthesis of Vacancy-Rich Two-Dimensional Black TiO2-x Nanoflakes for High-Performance Rechargeable Magnesium Batteries

Cobalt-doped TiO2@C hierarchical nanocomposites derived from Ti3C2 MXene as cathodes for hybrid magnesium-lithium batteries

Sn0.1-Li4Ti5O12/C as a promising cathode material with a large capacity and high rate performance for Mg-Li hybrid batteries

Mg2+ Doped LiNi1/3Co1/3Mn1/3O2 Hollow Flake-Like Structures with Enhanced Performances Cathodes for Lithium-Ion Batteries

V2O5 As the Cathode for Mg2+-Ion Batteries, Preparation and Characterization