Abstract:The capability of IGBT (Insulated Gate Bipolar Transistor) to handle heat is one of its main limitations of high power application. This paper aims to study an IGBT thermal model under flow cooling condition and estimate the IGBT module junction and coolant temperature. Firstly, this paper studies the IGBT module internal sandwich structure and calculates the thermal resistance and thermal capacitor for each layer using a 1D physical model. Then a Cauer electric model is built for the IGBT module to evaluate the thermal constant time of the model. The liquid cooling method is applied in this project for fast cooling and the thermal parameters are studied and measured since this cooling method involves both solid and liquid. In order to estimate the junction temperature, the sensing temperature from NTC (Negative temperature coefficient) resistor inside the module is used as reference temperature. The equivalent thermal models, also named Foster model, from both junction to NTC and NTC to coolant are built, respectively. With these thermal models, the junction and coolant temperature estimation methods are derived. For the purpose of making the estimation accurate, the thermal coupling effect is carefully studied. Finally, the thermal model is verified by inverter application with current steps sweeping; the estimated temperature is compared with thermal camera measurement result which demonstrates good accuracy of the thermal model. The estimated coolant temperature is also well matched with thermocouple measurement result.

Fast and Accurate Temperature Estimation of Three-level IGBT Converter Based on 3-D Coupled Thermal Model

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

A 3-D Thermal Network Model for IGBT Modules Considering Temperature Dependence of Heat Dissipation and Thermal Coupling

An Improved Transient Electro-Thermal Model for Paralleled IGBT Modules

A Temperature-Dependent Cauer Model Simulation of IGBT Module with Analytical Thermal Impedance Characterization

A 3-D-Lumped Thermal Network Model For Long-Term Load Profiles Analysis In High-Power Igbt Modules

A Transient 3-D Thermal Modeling Method for IGBT Modules Considering Uneven Power Losses and Cooling Conditions

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High-Power IGBT Modules

IGBT Junction and Coolant Temperature Estimation by Thermal Model.

Junction Temperature Estimation Model of Insulated Gate Bipolar Transistor Power Module in Three-Phase Inverter.

3D Thermal Resistance Model for Real-Time Temperature Monitoring of Multi-Chip IGBT Modules

A Temperature-Dependent Thermal Model of IGBT Modules Suitable for Circuit-Level Simulations

A Novel 3D Thermal Impedance Model for High Power Modules Considering Multi-Layer Thermal Coupling and Different Heating/cooling Conditions

General 3D lumped thermal model with various boundary conditions for high power IGBT modules

Electro-thermal based junction temperature estimation model and thermal performance analysis for IGBT module

Dynamic junction temperature estimation via built-in negative thermal coefficient (NTC) thermistor in high power IGBT modules

Modeling and Analysis of IGBT Power Module Electro-thermal Coupling Model

Coupled Distribute Circuit-3D FEM Model to Simulate the Transient Electromagnetic Performances of IGBTs