Abstract:High-temperature superconducting traction transformers (HTSTT) have the merits of small size and lightweight in comparison with their conventional counterparts. This article reports the development progress of a 6.6 MVA HTSTT operating at 65 K, including the design, testing, and system cooling. The introduction of flux diverters and an optimized winding design realized a short-circuit impedance higher than 43% and AC loss less than 3 kW. The insulation structure was designed to pass insulation tests specified in standard in China GB/T 25120-2010. An open cooling system with reduced pressure was developed, which realized the efficiency of the 6.6 MVA HTSTT above 99%. Before assembling the prototype transformer, we conducted tests for critical current and dielectric performance of the HTS double pancake coils (DPC) used in high-voltage (HV) and low- voltage (LV) windings to verify the current-carrying and insulation performances of each DPC. Finally, we measured the critical current and no-load loss of the HTSTT prototype at 77 K. Test results showed that the mass of the transformer is 33% less than conventional transformers. At 77 K, the critical current of the LV winding and HV winding is higher than 700 A and 50 A, respectively. Moreover, the HTSTT on a no-load test reached the test voltage of 25,000 V and loss of 6 kW. In the next step, we will continue to conduct experimental research, and verify the feasibility of the HTSTT on the train, and develop a circulating cooling system, all meeting the commercial requirements of the HTSTT.

Development and Application of Container-Type Low-Frequency Heating Device for Ultra-High Voltage Transformers

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

The Analysis of UHV Transmission’s Impact on Steam Turbine Operation

The Design And Finite Element Analyses Of The Super-Long Ultrasonic Amplitude Transformer

Design and Testing of a Medium Frequency Transformer

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Design of Medium-Voltage High-Frequency Transformers Based on High-Thermal-Conductivity Insulation Material

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Power Packaging Design Considerations for High Frequency High Voltage Generator

High Voltage Winding Internal Electric Field Shielding Structure for Medium Voltage High Frequency Transformers

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

Research on Temperature Field Simulation of Resin Insulated Dry-Type Power Transformers

Design, development, and testing of a 6.6 MVA HTS traction transformer for high-speed train applications

Engineering Design of Step-Up Transformer for Inverter Type High Voltage DC Power Supply

Research on temperature distribution characteristics of oil‐immersed power transformers based on fluid network decoupling

A study on the optimization of cooling performance for oil-immersed transformers in high temperature environments utilizing response surface methodology

Electro-thermal comprehensive analysis method for defective bushings in HVDC converter transformer valve-side under multiple-frequency voltage and current harmonics

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing