Abstract:This article presents a resolution-tunable time-to-digital converter (TDC) with a three-level structure, in which the low-level TDC employs an improved all-digital delay-locked loop (ADDLL) based on a cyclic pulse ring oscillator (CPRO) and a digital controller for detection lock state (DLS). Specifically, a bidirectional bypass transmission delay unit (BBTDU) in CPRO provides adjustable resolution with a 15 ps coarse delay step and a 3.5 ps fine delay step. Second, a data processing approach is presented to open the window to extract a 4-bit binary data of the bidirectional serial shift register line (BSSRL) in ADDLL for DLS and update the values of BSSRL at the same position of windowing, which can reduce the number of manipulated registers in BSSRL by approximately 93.7%. Then, a methodology of detecting the locking pattern between lock and unlock and selecting the fixed optimal windowing sequence to update the controlling values of BSSRL is proposed to eliminate dithering in a locked state, which can reduce the clock phase jitter when locked. Finally, the proposed TDC has been integrated into a system-on-chip (SoC) and fabricated in 65-nm CMOS technology. The measurement results implemented with a 30 MHz reference clock demonstrate that a resolution-tunable TDC with low power has been obtained. There are six configurable resolutions in all. When configured to a minimum resolution of 7.78 ps, the power consumption and the precision are 4.812 mW and 3.02 ps, respectively. While configured for a maximum resolution of 29.7 ps, the power consumption and the precision are 2.874 mW and 13.2 ps, respectively. The proposed TDC is extremely flexible and well-suited for integration into other large-scale application-specific integrated circuit (ASIC) chips to extend the application range, especially for low-frequency applications.

2 Ps Time-to-Digital Converter for Frequency Synthesis in 55 Nm CMOS Technology

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

A 12bit 39ps Two-Step Time-to-Digital Converter in 40nm CMOS

A High-Resolution, High-Linearity, Two-Step Time-to-Digital Converter for Wideband Counter-Assisted ADPLL in 0.13um CMOS

A 2.5GHz ADPLL with PVT-insensitive ΔΣ dithered time-to-digital conversion by utilizing an ADDLL.

A 2.5ghz Adpll With Pvt-Insensitive Delta Sigma Dithered Time-To-Digital Conversion By Utilizing An Addll

A 8bits, 6.2ps Resolution Two-Step Time-to-digital Converter with Set-Reset-based Arbiters and Signal Tracking Mechanism

A Wide Range and High Resolution Two-Step TDC for Millimeter-Wave Band ADPLL

A Low Power Tdc With 0.5ps Resolution For Adpll In 40nm Cmos

Time-to-digital Converter for Frequency Synthesis in 0.18 Μm CMOS

A Vernier Time-to-Digital Converter with 1.5ps Resolution for an All-Digital Phase Locked Loop in 28nm CMOS.

A Resolution-Tunable Low Power Time-to-Digital Converter With an Improved ADDLL Based on a Cyclic Pulse Ring Oscillator

A 10ps 500MS/s two-channel Vernier TDC in 0.18um CMOS technology

An Asynchronous Delay Line TDC for ADPLL in 0.13um CMOS.

A 10ps 500mhz Time-to-digital Converter in 0.18&#x03bc;m CMOS Technology for ADC

A 360μw Vernier Time-to-Digital Converter for ADPLL in IoT Applications

A Novel Time-to-Digital Converter Based on Low-Jitter Phase-Locked Loop

An 11-Bit and 39 Ps Resolution Time-To-Digital Converter for Adpll in Digital Television

A low-power coarse-fine time-to-digital converter in 65nm CMOS

All‐digital PLL with ΔΣ DLL Embedded TDC

A Wide Dynamic Range and Low Bit Error Pixel TDC Suitable for Array Application.