Abstract:Traditional electrochemical workstations are costly, complex, bulky, and primarily used in laboratories. This study develops a reliable, practical, and cost-effective portable wireless potentiostat to achieve real-time detection on-site and overcome the limitations of traditional electrochemical workstations. The system employs a general-purpose microcontroller unit (MCU), a dual-mode Bluetooth module and cost-effective multi-analog-to-digital converter (multi-ADC) to achieve differential sampling of the LMP91000. The system is equipped with buttons and OLEDs, enabling connection to mobile phones and computers for in-depth data analysis or independent operation. The system was successfully tested with [Fe(CN)6]3-, C6H12O6, and C3H6O3 solutions at concentrations ranging from 0 to 20 mM. The goodness-of-fit (R2) values are 0.984, 0.996, and 0.998, respectively. The average relative standard deviation of the three blank solutions is approximately 3.22%. The detection limits measured (0.003, 0.009, and 0.005 mM) are all lower than the minimum detection concentration (0.2, 0.1, and 0.1 mM). The coefficient of variation for repetitive experiments is less than 5.53%. The device accurately executed chronoamperometry (applied voltage range is ± 1.2 V, current range is ± 882 μA, accuracy is ± 1 %) with high sensitivity and good repeatability. Based on this circuit, a lactic acid detector and a urine glucose detector were developed, which work stably and support long-term operation, proving the stability and reliability of the circuit. Compared to commercial electrochemical workstations, PWES offers remarkable advantages in cost (< $6.4), size (41.5 mm × 76.5 mm), and practicality, making it suitable for a range of applications, including biomedical analysis, food safety, environmental monitoring, and smart wearables.

Design of a Wireless Compact Implantable Electrochemical Biosensor System for Health Monitoring Application

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A Novel Implantable Saw Sensor for Blood Pressure Monitoring

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Integrated Cell-Based Biosensor for Extracellular Electrophysiological Monitoring

Smartphone-based Battery-Free and Flexible Electrochemical Patch for Calcium and Chloride Ions Detections in Biofluids

Electrochemical Sensors for Clinic Analysis

A flexible and physically transient electrochemical sensor for real-time wireless nitric oxide monitoring

Continuous monitoring of multiple biomarkers with an ultrasensitive 3D-structured wearable biosensor

Millimeter-scale magnetic implants paired with a fully integrated wearable device for wireless biophysical and biochemical sensing

3D-assembled microneedle ion sensor-based wearable system for the transdermal monitoring of physiological ion fluctuations

A Wireless Implantable Sensor Network System for in Vivo Monitoring of Physiological Signals

Battery-free, tuning circuit–inspired wireless sensor systems for detection of multiple biomarkers in bodily fluids

A Low-Power, Wireless, Real-Time, Wearable Healthcare System

A Reliable, Practical and Cost-Effective Portable Wireless Potentiostat for Mobile Chemical Sensing and Biosensing

Wearable Electrochemical Biosensors for Advanced Healthcare Monitoring

A Full-Implantable Continuous Blood Glucose Monitoring System Design.

Wireless, Battery-Free Optoelectronic Systems As Subdermal Implants for Local Tissue Oximetry.

A wearable electrochemical biosensor for the monitoring of metabolites and nutrients

Smart MXene-based Bioelectronic Devices as Wearable Self-powered Health Monitor for Sensing Human Physiological Signals

Study on implantable low-power consumption wireless system for small animal monitoring