Abstract:Twinning-induced plasticity (TWIP) steels have become important materials in industry owing to the good combination of strength and ductility and high strain hardening rate. The excellent mechanical properties are highly related to the glide of dislocation and deformation twinning. However, the cross-slip behavior of the extended dislocation and the mechanism of deformation twinning are still controversial. Here, the partial dislocation motion and austenite twinning of a high-Mn steel at the early stage of deformation were investigated using in-situ tensile transmission electron microscope (TEM) technique. Results show that a large number of plane glide and cross-slip of extended dislocations can occur at the early stage of deformation. Extended dislocation nodes can be formed as a result of the reaction between adjacent extended dislocations on the same glide plane. In-situ tensile TEM experiments confirm two cross-slip models of partial dislocation: (1) the Friedel-Escaig model, cross-slip based on constriction of extend dislocation and re-dissociation; (2) the Fleischer model, cross-slip involving Lomer-Cottrell dislocation. Based on experimental results and energy calculations, it can be confirmed that the formation mechanism of austenite primary deformation twin induced by partial dislocations is different from that of secondary deformation twin. Grain boundary emits partial dislocation into the grain to form stable stacking fault which induces austenite primary deformation twin. The formation of secondary deformation twin is related to cross-slip of extended dislocation. Only the cross-slip of an extended dislocation containing a 90° partial dislocation can induce the formation of secondary deformation twin by introducing the Frank partial dislocation.

Characterization of Twin Transmission Structure of High Manganese Austenitic Steel by High-Resolution Transmission Electron Microscopy

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

Atomic-scale Understanding of Twin Intersection Rotation and Ε-Martensite Transformation in a High Mn Twinning-Induced Plasticity Steel

The Crystallographic Mechanism for Deformation Induced Martensitic Transformation Observed by High Resolution Transmission Electron Microscope

An Atomic Perspective on Twin Transmission in Magnesium

Transmission-scanning electron microscopy of interface fracture of ferrite deformation twins

Characteristic boundaries associated with three-dimensional twins in hexagonal metals

Cracking in a Fe–25Mn–3Si–3Al Steel

Transmission electron microscope in-situ observations of twinning in the lamellar microstructure in a TiAl based alloy

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling

A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel

Twins and twin-related domains in a grain boundary-engineered 304 stainless steel

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel

A geometrical model for grain boundary migration mediated formation of multifold twins

Three-dimensional study of grain scale tensile twinning activity in magnesium: A combination of microstructure characterization and mechanical modeling

Theory of transformation-mediated twinning

Challenges in the Prediction of Twin Transmission at Grain Boundaries in a Magnesium Alloy

Investigating the dislocation reactions on Σ3{111} twin boundary during deformation twin nucleation process in an ultrafine-grained high-manganese steel