Abstract:DC microgrids, considered building blocks of smart grid technologies, are subjected to small-signal instability due to the extensive introduction of power electronics devices. Therefore, in this paper, a sequence Virtual Filter (VF) controller, which considers not only the longitudinal virtual parameters but also the lateral capacitance and resistance, is first developed to increase the flexibility of system stability adjustment compared to the Virtual Impedance (VI) controller. Then, as distribution feeders are normally unbalanced and the application of the proposed sequence VF controller may amplify the distortion of imbalances on DC voltage, a novel Reference Current Generation (RCG) strategy considering the VF controller is proposed for Grid-Connected Converter (GCC) to improve DC microgrid power quality. The double-frequency fluctuation of the DC-link voltage is eliminated by regulating the oscillation of the active power flowing into the converter instead of the Point of Common Coupling (PCC) to 0. The PSCAD simulation results illustrate that the sequence VF controller can enhance the stability adjustment since, in some cases, the system can only be stabilized by adjusting lateral parameters. On the other hand, the proposed RCG strategy can significantly reduce DC voltage fluctuations compared to the traditional approach. Furthermore, incorporating the proposed strategy with the sequence VF controller offers greater flexibility in reducing the negative-sequence current while maintaining a power transfer capacity for GCCs in a master–slave-based DC microgrid, comparable to that of the traditional strategy.

NDM-based H-infinity Robust Control of Parallel-Connected Grid-Connected Converters for V2G

H∞-Control of Grid-Connected Converters: Design, Objectives and Decentralized Stability Certificates

Robust Control for Single Phase Grid-connected Inverters

Analysis and Benchmarking of Grid-Forming Control for Power Converters

Grid-Forming Control for DFIG Based Wind Farms to Enhance the Stability of LCC-HVDC

Robust Current Control of Grid-Tied Inverters for Renewable Energy Integration under Non-Ideal Grid Conditions

An Inertia Adjustment Control Strategy of Grid-Forming Electric Vehicle for V2G Application

A Virtual-Filter-Based Stability Enhancement Control for Grid-Connected Converter in Dc Microgrids under Unbalanced Grid Conditions

Research on Control Technology and Current Distortion of Bidirectional AC/DC Converter Based on V2G

Collaborative Control of DFIG System During Network Unbalance Using Reduced-Order Generalized Integrators

Lmi-Based Direct Grid Current Robust Guaranteed Cost Control Of Grid-Connected Inverters With Lcl Filters For Weak Grid

Resonance Analysis and Suppression for Multiparallel Inverter System of V2G

A Grid-Connected Inverter with Grid-Voltage-Weighted Feedforward Control Based on the Quasi-Proportional Resonance Controller for Suppressing Grid Voltage Disturbances

A Composite Control Strategy for Suppressing the Current Harmonic at the Grid Side of V2G Charger

Networked robust control of electric vehicles based on linear matrix inequalities

Internal Energy Based Grid-Forming Control for MMC-HVDC Systems With Wind Farm Integration

High-Frequency Resonance Mitigation for Plug-In Hybrid Electric Vehicles’ Integration with a Wide Range of Grid Conditions

Robust Passivity-Based Control for Grid-Forming Converter

Control Design of Grid-Forming and Grid-Following Inverters with a seamless transition in Microgrid

A new grid side inertia support control method for cascaded power converters in Bi-directional EV chargers

A Distributed MPC to Exploit Reactive Power V2G for Real-Time Voltage Regulation in Distribution Networks