Monolithic Mid-Infrared Optical Frequency Comb Generator Via Parametric Down Conversion

Kunpeng Jia,Xiaohan Wang,Xin Ni,Jian Guo,Zhenda Xie,Shu-Wei Huang,Shining Zhu

DOI: https://doi.org/10.1364/fio.2019.fw6c.1

2019-01-01

Abstract:We demonstrate the first mid-infrared frequency comb generation via optical parametric down conversion from a high-Q χ(2) optical superlattice box resonator. Low noise comb is achieved with high output power.

What problem does this paper attempt to address?

2 Μm Microcomb Generation from a Monolithic Lithium Niobate Optical Parametric Oscillator

Kunpeng Jia,Xiaohan Wang,Xin Ni,Jian Gao,Zhenda Xie,Shu-Wei Huang,Shi-ning Zhu

DOI: https://doi.org/10.1364/cleo_si.2020.sm3l.7

2020-01-01

Abstract:We demonstrate 2 pm frequency comb generation via optical parametric down conversion from a high-quality-factor x(2) optical superlattice box resonator. Low noise comb is achieved with high output power.
Mid-infrared Optical Frequency Comb Generation from a Chi-2 Optical Superlattice Box Resonator

Kunpeng Jia,Xiaohan Wang,Xin Ni,Huaying Liu,Liyun Hao,Jian Guo,Jian Ning,Gang Zhao,Xinjie Lv,Zhenda Xie,Shining Zhu

DOI: https://doi.org/10.48550/arxiv.1904.00528

2019-01-01

Abstract:Optical frequency combs (OFCs) at Mid-Infrared (MIR) wavelengths are essential for applications in precise spectroscopy, gas sensing and molecular fingerprinting, because of its revolutionary precision in both wavelength and frequency domain. The microresonator-based OFCs make a further step towards practical applications by including such high precision in a compact and cost-effective package. However, dispersion engineering is still a challenge for the conventional chi-3 micro-ring resonators and a MIR pump laser is required. Here we develop a different platform of a chi-2 optical superlattice box resonator to generate MIR OFC by optical parametric down conversion. With near-material-limited quality factor of 2.0*10^7, broadband MIR OFC can be generated with over 250 nm span around 2060 nm, where only a common near-infrared laser is necessary as pump. The fine teeth spacing corresponds to a measurable radio frequency beat note at 1.566 GHz, and also results in a fine spectroscopy resolution. Its linewidth is measured to be 6.1 kHz, which reveals a low comb noise that agrees well with the clean temporal waveforms. With high output power of over 370 mW, such MIR OFC is capable for long distance sensing and ranging applications.
2 Μm Optical Frequency Comb Generation Via Optical Parametric Oscillation from a Lithium Niobate Optical Superlattice Box Resonator

Xiaohan Wang,Kunpeng Jia,Mengwen Chen,Shanshan Cheng,Xin Ni,Jian Guo,Yihao Li,Huaying Liu,Liyun Hao,Jian Ning,Gang Zhao,Xinjie Lv,Shu-Wei Huang,Zhenda Xie,Shi-Ning Zhu

DOI: https://doi.org/10.1364/prj.432076

IF: 7.6

2021-01-01

Photonics Research

Abstract:Optical parametric oscillators (OPOs) can downconvert the pump laser to longer wavelengths with octave separation via χ ( 2 ) , which is widely used for laser wavelength extension including mid-infrared (MIR) generation. Such a process can be integrated in monolithic resonators, being compact and low in threshold. In this work, we show that the monolithic χ ( 2 ) mini-OPO can also be used for optical frequency comb generation around 2096 nm and enters the boundary of MIR range. A new geometry called an optical superlattice box resonator is developed for this realization with near-material-limited quality factor of 4.0 × 10 7 . Only a continuous-wave near-infrared pump laser is required, with OPO threshold of 80 mW and output power up to 340 mW. Revival temporal profiles are measured at a detectable repetition frequency of 1.426 GHz, and narrow beat note linewidth of less than 10 Hz shows high comb coherence. These results are in good agreement with our simulation for a stable comb generation. Such an OPO-based comb source is useful for carbon dioxide sensing or the mine prospect applications and can be generalized to longer MIR wavelengths for general gas spectroscopy.
Efficiency-enhanced optical parametric down conversion for mid-infrared generation on a tandem periodically poled MgO-doped stoichiometric lithium tantalate chip.

Y H Liu,Z D Xie,W Ling,Y Yuan,X J Lv,J Lu,X P Hu,G Zhao,S N Zhu

DOI: https://doi.org/10.1364/OE.19.017500

IF: 3.8

2011-01-01

Optics Express

Abstract:We report an efficiency-enhanced mid-infrared generation via optical parametric down conversion. A tandem periodically-poled MgO-doped stoichiometric lithium tantalate crystal is used to realize on-chip generation and amplification of mid-infrared radiation inside an optical parametric oscillator cavity. We achieved 21.2% conversion efficiency (24% slope efficiency), which is among the highest efficiencies for the pump-to-mid-infrared conversion, with 1064 nm Nd class laser pump. The maximum average output power at 3.87 mu m reached 635 mW with a 3.0 W pump. (C) 2011 Optical Society of America
Passively mode-locked interband cascade optical frequency combs

Mahmood Bagheri,Clifford Frez,Lukasz A Sterczewski,Ivan Gruidin,Mathieu Fradet,Igor Vurgaftman,Chadwick L Canedy,William W Bewley,Charles D Merritt,Chul Soo Kim,Mijin Kim,Jerry R Meyer

DOI: https://doi.org/10.1038/s41598-018-21504-9

2018-02-20

Abstract:Since their inception, optical frequency combs have transformed a broad range of technical and scientific disciplines, spanning time keeping to navigation. Recently, dual comb spectroscopy has emerged as an attractive alternative to traditional Fourier transform spectroscopy, since it offers higher measurement sensitivity in a fraction of the time. Midwave infrared (mid-IR) frequency combs are especially promising as an effective means for probing the strong fundamental absorption lines of numerous chemical and biological agents. Mid-IR combs have been realized via frequency down-conversion of a near-IR comb, by optical pumping of a micro-resonator, and beyond 7 μm by four-wave mixing in a quantum cascade laser. In this work, we demonstrate an electrically-driven frequency comb source that spans more than 1 THz of bandwidth centered near 3.6 μm. This is achieved by passively mode-locking an interband cascade laser (ICL) with gain and saturable absorber sections monolithically integrated on the same chip. The new source will significantly enhance the capabilities of mid-IR multi-heterodyne frequency comb spectroscopy systems.
Optical frequency comb generation from a monolithic microresonator

P Del'Haye,A Schliesser,O Arcizet,T Wilken,R Holzwarth,T J Kippenberg

DOI: https://doi.org/10.1038/nature06401

IF: 64.8

2007-12-20

Nature

Abstract:Optical frequency combs provide equidistant frequency markers in the infrared, visible and ultraviolet, and can be used to link an unknown optical frequency to a radio or microwave frequency reference. Since their inception, frequency combs have triggered substantial advances in optical frequency metrology and precision measurements and in applications such as broadband laser-based gas sensing and molecular fingerprinting. Early work generated frequency combs by intra-cavity phase modulation; subsequently, frequency combs have been generated using the comb-like mode structure of mode-locked lasers, whose repetition rate and carrier envelope phase can be stabilized. Here we report a substantially different approach to comb generation, in which equally spaced frequency markers are produced by the interaction between a continuous-wave pump laser of a known frequency with the modes of a monolithic ultra-high-Q microresonator via the Kerr nonlinearity. The intrinsically broadband nature of parametric gain makes it possible to generate discrete comb modes over a 500-nm-wide span (approximately 70 THz) around 1,550 nm without relying on any external spectral broadening. Optical-heterodyne-based measurements reveal that cascaded parametric interactions give rise to an optical frequency comb, overcoming passive cavity dispersion. The uniformity of the mode spacing has been verified to within a relative experimental precision of 7.3 x 10(-18). In contrast to femtosecond mode-locked lasers, this work represents a step towards a monolithic optical frequency comb generator, allowing considerable reduction in size, complexity and power consumption. Moreover, the approach can operate at previously unattainable repetition rates, exceeding 100 GHz, which are useful in applications where access to individual comb modes is required, such as optical waveform synthesis, high capacity telecommunications or astrophysical spectrometer calibration.
Design of on-chip mid-IR frequency comb with ultra-low power pump in near-IR

Jinze He,Yang Li

DOI: https://doi.org/10.1364/OE.401881

2020-10-12

Abstract:Broadband mid-infrared frequency combs are of particular interest to mid-infrared spectroscopy due to their ruler-like precise discrete comb teeth. However, the state-of-the-art mid-infrared frequency combs are usually limited to low integration level and high pump power as a result of the conventional way of mid-infrared frequency comb generation--producing a near-infrared frequency comb first and then convert it to mid-infrared regime through a nonlinear process. Here, we theoretically investigate two integrated designs for generating mid-infrared frequency combs with ultra-low power pump based on the lithium-niobate on insulator (LNOI) platform. Utilizing periodically poled lithium-niobate (PPLN) waveguides and microring electro-optic phase modulators, we switch the conventional order of comb generation and nonlinear conversion. This paradigm shift significantly improves the conversion efficiency of mid-infrared frequency comb generation and obviates the need for femtosecond lasers. Our theoretical results predict that a broadband mid-infrared frequency comb around 4.3 µm with nanowatt-power-level comb teeth can be produced from continuous-wave (CW) inputs whose power is lower than 5 mW with an ultra-high conversion efficiency above 1800 %/W. Our designs of mid-infrared frequency comb have high controllability, flexibility and integration level, enabling the miniaturization of mid-infrared spectrometers.
Simple method for mid-infrared optical frequency comb generation with dynamic offset frequency tuning

Mikhail Roiz,Krishna Kumar,Juho Karhu,Markku Vainio

DOI: https://doi.org/10.1063/5.0038496

2020-12-01

Abstract:We present a simple method for fully-stabilized mid-infrared optical frequency comb generation based on single-pass femtosecond optical parametric generation that is seeded by a continuous-wave laser. We have implemented the method in a periodically poled lithium niobate crystal that produces a frequency comb tunable across 3325 - 4000 nm (2380 - 3030 cm-1). The method generates the mid-infrared (idler) comb with known and stabilized Carrier-Envelope Offset (CEO) frequency without the need to directly detect it. The idler CEO is continuously tunable for almost half of the repetition rate and can be modulated, while maintaining its central frequency. Together with the high output power (up to 700 mW) and low intensity noise (0.018% integrated in 10 Hz - 2 MHz bandwidth) this makes the demonstrated mid-infrared frequency comb promising for many applications such as high-precision molecular spectroscopy, frequency metrology and high harmonic generation.

Optics
Monolithic lithium niobate photonic circuits for Kerr frequency comb generation and modulation

Cheng Wang,Mian Zhang,Mengjie Yu,Rongrong Zhu,Han Hu,Marko Loncar

DOI: https://doi.org/10.1038/s41467-019-08969-6

2019-02-28

Abstract:Microresonator Kerr frequency combs could provide miniaturised solutions for a wide range of applications. Many of these applications however require further manipulation of the generated frequency comb signal using photonic elements with strong second-order nonlinearity (χ(2)). To date these functionalities have largely been implemented as discrete components due to material limitations, which comes at the expense of extra system complexity and increased optical losses. Here we demonstrate the generation, filtering and electro-optic modulation of a frequency comb on a single monolithic integrated chip, using a nanophotonic lithium-niobate platform that simultaneously possesses large electro-optic (χ(2)) and Kerr (χ(3)) nonlinearities, and low optical losses. We generate broadband Kerr frequency combs using a dispersion-engineered high-Q lithium-niobate microresonator, select a single comb line using an electrically programmable add-drop filter, and modulate the intensity of the selected line. Our results pave the way towards monolithic integrated frequency comb solutions for spectroscopy, data communication, ranging and quantum photonics.
Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Y. H. Liu,X. J. Lv,Z. D. Xie,X. P. Hu,Y. Yuan,J. Lu,L. N. Zhao,G. Zhao,S. N. Zhu

DOI: https://doi.org/10.1007/s00340-011-4695-9

2011-01-01

Abstract:We demonstrate a high efficiency mid-infrared laser source based on optical parametric oscillator (OPO) assisted by an intracavity optical parametric amplification (OPA). The OPA-assisted-OPO scheme was realized in one piece of commensurable dual-periodic superlattice in which the signal light generated from the OPO process serves as the pump light for the OPA process. A maximum output power of 508 mW at 3.92 μm was achieved under a pump power of 2.85 W at 1.064 μm. The pump-to-idler conversion efficiency is 17.8% and the slope efficiency is 23.8%, and the enhancements of them are 58.9% and 67.6%, respectively, comparing with the standard OPO scheme.
Monolithic photonic circuits for Kerr frequency comb generation, filtering and modulation

Cheng Wang,Mian Zhang,Rongrong Zhu,Han Hu,Marko Loncar

DOI: https://doi.org/10.48550/arXiv.1809.08637

2018-09-23

Optics

Abstract:Microresonator Kerr frequency combs, which rely on third-order nonlinearity ($\chi^{(3)}$), are of great interest for a wide range of applications including optical clocks, pulse shaping, spectroscopy, telecommunications, light detection and ranging (LiDAR) and quantum information processing. Many of these applications require further spectral and temporal control of the generated frequency comb signal, which is typically accomplished using additional photonic elements with strong second-order nonlinearity ($\chi^{(2)}$). To date these functionalities have largely been implemented as discrete off-chip components due to material limitations, which come at the expense of extra system complexity and increased optical losses. Here we demonstrate the generation, filtering and electro-optic modulation of a frequency comb on a single monolithic integrated chip, using a thin-film lithium niobate (LN) photonic platform that simultaneously possesses large $\chi^{(2)}$ and $\chi^{(3)}$ nonlinearities and low optical losses. We generate broadband Kerr frequency combs using a dispersion-engineered high quality factor LN microresonator, select a single comb line using an electrically programmable add-drop filter, and modulate the intensity of the selected line. Our results pave the way towards monolithic integrated frequency comb solutions for spectroscopy data communication, ranging and quantum photonics.
Microwave Photonic Down-Conversion System with Programmable Frequency Response Utilizing Optical Frequency Comb

Feiya Chen,Xiaoqi Zhu,Zhangyuan Chen

DOI: https://doi.org/10.1364/acpc.2017.s3e.3

2017-01-01

Abstract:A novel microwave photonic down-conversion system with programmable frequency response utilizing optical frequency comb is demonstrated. Microwave signals between 25.5-40GHz are down-converted to 0.5-15GHz while the intermediate frequency filtering can be programmable.
Mid-infrared frequency combs and staggered spectral patterns in $χ^{(2)}$ microresonators

Nicolas Amiune,Zhiwei Fan,Vladislav V. Pankratov,Danila N. Puzyrev,Dmitry V. Skryabin,Kevin T. Zawilski,Peter G. Schunemann,Ingo Breunig

DOI: https://doi.org/10.1364/OE.476436

2022-05-25

Abstract:The potential of frequency comb spectroscopy has aroused great interest in generating mid-infrared frequency combs in the integrated photonic setting. However, despite remarkable progress in microresonators and quantum cascade lasers, the availability of suitable mid-IR comb sources remains scarce. Here, we present a new approach for the generation of mid-IR microcombs through cascaded three-wave-mixing. By pumping a CdSiP$_2$ microresonator at 1.55 $\mu$m wavelength with a low power continuous wave laser, we generate $\chi^{(2)}$ frequency combs at 3.1 $\mu$m wavelength, with a span of about 30 nm. We observe ordinary combs states with a line spacing of the free spectral range of the resonator, and combs where the sideband numbers around the pump and half-harmonic alternate, forming staggered patterns of spectral lines. Our scheme for mid-IR microcomb generation is compatible with integrated telecom lasers. Therefore, it has the potential to be used as a simple and fully integrated mid-IR comb source, relying on only one single material.

Optics
Mid-infrared frequency comb generation via cascaded quadratic nonlinearities in quasi-phase-matched waveguides

Abijith S. Kowligy,Alex Lind,Daniel D. Hickstein,David R. Carlson,Henry Timmers,Nima Nader,Flavio C. Cruz,Gabriel Ycas,Scott B. Papp,Scott A. Diddams

DOI: https://doi.org/10.1364/ol.43.001678

IF: 3.6

2018-04-05

Optics Letters

Abstract:We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-χ<sup>(2)</sup> nonlinearity. With nanojoule-scale pulses from an Er:fiber laser, we observe octave-spanning supercontinuum in the near-infrared with dispersive wave generation in the 2.5-3 μm region and intrapulse difference frequency generation in the 4-5 μm region. By engineering the quasi-phase-matched grating profiles, tunable, narrowband MIR and broadband MIR spectra are both observed in this geometry. Finally, we perform numerical modeling using a nonlinear envelope equation, which shows good quantitative agreement with the experiment-and can be used to inform waveguide designs to tailor the MIR frequency combs. Our results identify a path to a simple single-branch approach to mid-infrared frequency comb generation in a compact platform using commercial Er:fiber technology.

optics
Low-Noise Frequency Synthesis Based on Microcomb at a Few Gigahertz

Kunpeng Jia,Xinwei Yi,Xiaohan Wang,Yunfeng Liu,Wei Liang,Zhenda Xie,Shi-Ning Zhu

DOI: https://doi.org/10.1364/cleo_fs.2023.fw4b.5

2023-01-01

Abstract:We present soliton microcombs generation for low-noise optical frequency synthesis at a few gigahertz. The microcomb source is based on a monolithic fiber Fabry-Perot (FFP) resonator directly pumped by a distributed feedback (DFB) laser.
$χ^{(2)}$ mid-infrared frequency comb generation and stabilization with few-cycle pulses

Alexander J. Lind,Abijith Kowligy,Henry Timmers,Flavio C. Cruz,Nima Nader,Myles C. Silfies,Thomas K. Allison,Scott A. Diddams

DOI: https://doi.org/10.1103/PhysRevLett.124.133904

2018-11-07

Abstract:Mid-infrared laser frequency combs are compelling sources for precise and sensitive metrology with applications in molecular spectroscopy and spectro-imaging. The infrared atmospheric window between 3-5.5 $\mu$m in particular provides vital information regarding molecular composition. Using a robust, fiber-optic source of few-cycle pulses in the near-infrared, we experimentally demonstrate ultra-broad bandwidth nonlinear phenomena including harmonic and difference frequency generation in a single pass through periodically poled lithium niobate (PPLN). These $\chi^{(2)}$ nonlinear optical processes result in the generation of frequency combs across the mid-infrared atmospheric window which we employ for dual-comb spectroscopy of acetone and carbonyl sulfide with resolution as high as 0.003 cm$^{-1}$. Moreover, cascaded $\chi^{(2)}$ nonlinearities in the same PPLN directly provide the carrier-envelope offset frequency of the near-infrared driving pulse train in a compact geometry.

Optics,Chemical Physics
Generation of Optical Frequency Comb in a Chi-2 Sheet Micro Optical Parametric Oscillator Via Cavity Phase Matching

Xin Ni,Kunpeng Jia,Xiaohan Wang,Huaying Liu,Jian Guo,Shu-Wei Huang,Baicheng Yao,Nicolo Sernicola,Zhenlin Wang,Xinjie Lv,Gang Zhao,Zhenda Xie,Shi-Ning Zhu

DOI: https://doi.org/10.1088/0256-307x/38/6/064201

2019-01-01

Abstract:We demonstrate a broadband optical parametric oscillation, using a sheet cavity, via cavity phase-matching. A 21.2 THz broad comb-like spectrum is achieved, with a uniform line spacing of 133.0 GHz, despite a relatively large dispersion of 275.4 fs2/mm around 1064 nm. With 22.6% high slope efficiency, and 14.9 kW peak power handling, this sheet optical parametric oscillator can be further developed for χ (2) comb.
Midinfrared Tunable Laser with Noncritical Frequency Matching in Box Resonator Geometry

Kunpeng Jia,Xiaohan Wang,Jian Guo,Yihao Li,Xin Ni,Pengfei Fan,Qiqi Shen,Tao Wang,Xinjie Lv,Gang Zhao,Shu-Wei Huang,Xueming Yang,Zhenda Xie,Shi-Ning Zhu,Shi-ning Zhu

DOI: https://doi.org/10.1103/physrevlett.127.213902

IF: 8.6

2021-11-18

Physical Review Letters

Abstract:Monolithic optical parametric oscillators extend laser frequencies in compact architectures, but normally guide and circulate all pump, signal, and idler beams. Critical frequency matching is raised among these resonances, limiting operation stability and continuous tuning. Here, we develop a box resonator geometry that guides all beams but only resonates for signal. Such noncritical frequency matching enables 227 GHz continuous tuning, with sub-10 kHz linewidth and 0.43 W power at 3310 nm. Our results confirm that monolithic resonator can be effectively used as a tunable laser including midinfrared wavelength, as further harnessed with methane fine spectral measurement at MHz accuracy.

physics, multidisciplinary
Efficient Generation of a Near-visible Frequency Comb via Cherenkov-like Radiation from a Kerr Microcomb

Xiang Guo,Chang-Ling Zou,Hojoong Jung,Zheng Gong,Alexander Bruch,Liang Jiang,Hong X. Tang

DOI: https://doi.org/10.1103/physrevapplied.10.014012

IF: 4.6

2018-01-01

Physical Review Applied

Abstract:Optical frequency combs enable state-of-the-art applications including frequency metrology, optical clocks, astronomical measurements, and sensing. Recent demonstrations of microresonator-based Kerr frequency combs or microcombs pave the way to scalable and stable comb sources on a photonic chip. Generating microcombs in the short-wavelength range, however, has been limited by large material dispersion and optical loss. Here we demonstrate a scheme for efficiently generating microcombs near the edge of the visible spectrum in a high-Q aluminum nitride microring resonator. The enhanced Pockels effect strongly couples infrared and near-visible modes into hybrid mode pairs, which participate in the Kerr microcomb generation process and lead to strong Cherenkov-like radiation in the near-visible band an octave apart. A surprisingly high on-chip conversion efficiency of 22% is achieved from a pulsed pump laser to the near-visible comb. As a result of pulse pumping, the generated microcombs are in the chaotic state. We further demonstrate a robust frequency tuning of the near-visible comb by more than one free spectral range and apply it to the absorption spectroscopy of a water-based dye molecule solution. Our work is a step towards high-efficiency visible microcomb generation and its utilization, and it also provides insights into the significance of the Pockels effect and its strong coupling with Kerr nonlinearity in a single microcavity device.
Low-Threshold 4/5 Octave-Spanning Mid-Infrared Frequency Comb in a LiNbO$_3$ Microresonator

Weichen Fan,Zhizhou Lu,Wei Li,Xinyu Wang,Mengyao Zhou,Weiqiang Wang,Qibing Sun,Guoxi Wang,Dong Cheng,Leiran Wang,Wenfu Zhang,Wei Zhao

DOI: https://doi.org/10.1109/jphot.2019.2949313

IF: 2.4

2019-12-01

IEEE Photonics Journal

Abstract:Mid-infrared (MIR) optical frequency combs (OFCs) are ideal light sources for precision metrology and can find extensive applications, especially in molecular spectroscopy and gas detection. Here the generation of mode-locked MIR frequency comb in a LiNbO$_3$ microring through optimized slot-waveguide design is proposed. Such microcomb can span over four-fifths of an octave (ranging from $sim$2810 nm to $sim$4630 nm) with pump power as low as 50 mW, which can be applied to the 2f-3f self-referencing for fully stabilization and helpful to monolithic integration of the whole system. Further investigations on complex dynamical processes for the microcomb generation suggest that the intracavity soliton drifting caused by the third-order dispersion could be compensated by the self-steepening effect as introducing an additional drift through proper dispersion tailoring. This work could facilitate the low-threshold broadband MIR frequency comb generation technique, as well as provide a way to realize more delicate control of soliton microcombs in both temporal and spectral domain.

engineering, electrical & electronic,optics,physics, applied

Monolithic Mid-Infrared Optical Frequency Comb Generator Via Parametric Down Conversion

2 Μm Microcomb Generation from a Monolithic Lithium Niobate Optical Parametric Oscillator

Mid-infrared Optical Frequency Comb Generation from a Chi-2 Optical Superlattice Box Resonator

2 Μm Optical Frequency Comb Generation Via Optical Parametric Oscillation from a Lithium Niobate Optical Superlattice Box Resonator

Efficiency-enhanced optical parametric down conversion for mid-infrared generation on a tandem periodically poled MgO-doped stoichiometric lithium tantalate chip.

Passively mode-locked interband cascade optical frequency combs

Optical frequency comb generation from a monolithic microresonator

Design of on-chip mid-IR frequency comb with ultra-low power pump in near-IR

Simple method for mid-infrared optical frequency comb generation with dynamic offset frequency tuning

Monolithic lithium niobate photonic circuits for Kerr frequency comb generation and modulation

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Monolithic photonic circuits for Kerr frequency comb generation, filtering and modulation

Microwave Photonic Down-Conversion System with Programmable Frequency Response Utilizing Optical Frequency Comb

Mid-infrared frequency combs and staggered spectral patterns in $χ^{(2)}$ microresonators

Mid-infrared frequency comb generation via cascaded quadratic nonlinearities in quasi-phase-matched waveguides

Low-Noise Frequency Synthesis Based on Microcomb at a Few Gigahertz

$χ^{(2)}$ mid-infrared frequency comb generation and stabilization with few-cycle pulses

Generation of Optical Frequency Comb in a Chi-2 Sheet Micro Optical Parametric Oscillator Via Cavity Phase Matching

Midinfrared Tunable Laser with Noncritical Frequency Matching in Box Resonator Geometry

Efficient Generation of a Near-visible Frequency Comb via Cherenkov-like Radiation from a Kerr Microcomb

Low-Threshold 4/5 Octave-Spanning Mid-Infrared Frequency Comb in a LiNbO$_3$ Microresonator