Duality of H1 and BMO on Positively Curved Manifolds and Their Characterizations

Chen Jie-cheng,Luo Cheng

DOI: https://doi.org/10.1007/bfb0087753

1991-01-01

Abstract:In this paper, we prove that on positively curved manifolds, the dual of H1 is just BMO. We also obtain some norm characterizations of BMO and H1, and atomic decomposition of H1. They are generalizations of the corresponding theory on R n set up by C. Fefferman and E.M. Stein.

What problem does this paper attempt to address?

Duality of H 1 and BMO on positively curved manifolds and their characterizations

Chen Jie-cheng,Luo Cheng

DOI: https://doi.org/10.1007/BFb0087753

1991-01-01

Abstract:In this paper, we prove that on positively curved manifolds, the dual of H 1 is just BMO. We also obtain some norm characterizations of BMO and H 1, and atomic decomposition of H 1. They are generalizations of the corresponding theory on R n set up by C. Fefferman and E.M. Stein.
On the Planar Dual Minkowski Problem

Shibing Chen,Qi-Rui Li

DOI: https://doi.org/10.1016/j.aim.2018.05.010

IF: 1.675

2018-01-01

Advances in Mathematics

Abstract:In this paper, we resolve the planar dual Minkowski problem, proposed by Huang et al. (2016) [31] for all positive indices without any symmetry assumption. More precisely, given any q>0, and function f on S1, bounded by two positive constants, we show that there exists a convex body Ω in the plane, containing the origin in its interior, whose dual curvature measure C˜q(Ω,⋅) has density f. In particular, if f is smooth, then ∂Ω is also smooth.
Rational curves on Hermitian manifolds

Huitao Feng,Kefeng Liu,Xueyuan Wan,Xiaokui Yang

2014-01-01

Abstract: By using analytic method, we prove that there exist rational curves on compact Hermitian manifolds with positive holomorphic bisectional curvature. It confirms a question of S.-T. Yau. It is well-known that Mori proved in \cite{Mori79} that every compact complex manifold $N$ with $c_1(N)>0$ contains at least one rational curve. However, as a borderline example, we show that the standard Hopf surface $S^1\times S^3$ has a Hermitian metric with non-negative holomorphic bisectional curvature (in particular, $c_1(S^1\times S^3)\geq 0$), but it contains no rational curve.
Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

Huitao Feng,Kefeng Liu,Xueyuan Wan

DOI: https://doi.org/10.4310/mrl.2017.v24.n3.a7

2017-01-01

Mathematical Research Letters

Abstract:In this short note, using Siu-Yau's method [14], we give a new proof that any n-dimensional compact Kahler manifold with positive orthogonal bisectional curvature must be biholomorphic to P-n.
A Proof of a Conjecture of Marino-Vafa on Hodge Integrals

CCM Liu,KF Liu,R Zhou

DOI: https://doi.org/10.4310/jdg/1090511689

2003-01-01

Journal of Differential Geometry

Abstract:We prove a remarkable formula for Hodge integrals conjectured by Marino andVafa based on large N duality, using functorial virtual localization on certainmoduli spaces of relative stable morphisms.
A REPRESENTATION THEOREM OF HARMONIC FUNCTIONS AND ITS APPLICATION TO BMO ON MANIFOLDS

Chen Jiecheng

DOI: https://doi.org/10.1007/s11766-001-0066-3

2001-01-01

Abstract:In this paper a representation theorem of harmonic functions on manifolds is set up. As an application, a characterization of BMO in terms of Carleson measures is obtained.
Curvature characterization of Hermitian manifolds with Bismut parallel torsion

Quanting Zhao,Fangyang Zheng

2024-07-15

Abstract:In this article, we study Hermitian manifolds whose Bismut connection has parallel torsion, which will be called {\em Bismut torsion parallel manifolds,} or {\em BTP} manifolds for brevity. We obtain a necessary and sufficient condition characterizing BTP manifolds in terms of Bismut curvature tensor alone (Theorem 1.1). We also present examples and discuss some general properties for BTP manifolds, as well as give a classification result for non-balanced BTP threefolds (Theorem 1.16).

Differential Geometry
Nonpostively curved Hermitian metric on product manifolds

Chengjie Yu

DOI: https://doi.org/10.48550/arXiv.1003.0186

2010-02-28

Abstract:In this article, we classify all the Hermitian metrics on a complex product manifold with nonpositive holomorphic bisectional curvature. It is a generalization of a result by Zheng.

Differential Geometry
Mixed Hodge-Riemann Bilinear Relations and M-Positivity

Xiao Jian

DOI: https://doi.org/10.1007/s11425-020-1704-2

2020-01-01

Science China Mathematics

Abstract:Motivated by our previous work on Hodge-index type theorems, we give a form of mixed Hodge-Riemann bilinear relation by using the notion of m-positivity, whose proof is an adaptation of the works of Timorin (1998) and Dinh and Nguyên (2006). This mixed Hodge-Riemann bilinear relation holds with respect to mixed polarizations in which some satisfy particular positivity condition, but could be degenerate along some directions. In particular, it applies to fibrations of compact Kähler manifolds.
Curvature Characterization of Certain Bounded Domains of Holomorphy

FY ZHENG

DOI: https://doi.org/10.2140/pjm.1994.163.183

1994-01-01

Pacific Journal of Mathematics

Abstract:In this note, we study the relation between the existence of a negatively curved complete hermitian metric on a complex manifold M and the product structure of (or contained in) M. We introduce the concept of geometric ranks and give a curvature characterization of the rank one manifolds, which generalizes the previous results of P. Yang and N. Mok (see below). In the proof, we used the old techniques of Yau's Schwartz lemma and Cheng-Yau's result on the existence of Kahler-Einstein metrics.
On Kähler Manifolds with Positive Orthogonal Bisectional Curvature

X. X. Chen

DOI: https://doi.org/10.1016/j.aim.2006.11.006

IF: 1.675

2007-01-01

Advances in Mathematics

Abstract:For any irreducible Kähler manifold which admits positive orthogonal bisectional curvature and C1>0, if this positivity condition is preserved under the flow, then the underlying manifold is biholomorphic to CPn.
ON COMPLETE SUBMANIFOLDS WITH PARALLEL MEAN CURVATURE IN NEGATIVE PINCHED MANIFOLDS

Leng Yan,Xu Hongwei

DOI: https://doi.org/10.1007/s11766-007-0203-8

2007-01-01

Abstract:A rigidity theorem for oriented complete submanifolds with parallel mean curvature in a complete and simply connected Riemannian (n + p)-dimensional manifold N n+p with negative sectional curvature is proved. For given positive integers n(≥ 2), p and for a constant H satisfying H > 1 there exists a negative number τ(n, p, H) ∈ (−1,0) with the property that if the sectional curvature of N is pinched in [−1, τ(n, p, H)], and if the squared length of the second fundamental form is in a certain interval, then N n+p is isometric to the hyperbolic space H n+p(−1). As a consequence, this submanifold M is congruent to S n (1/$\sqrt {H^2 - 1} $) or the Veronese surface in S 4(1/$\sqrt {H^2 - 1} $).
On Hermitian manifolds with Bismut-Strominger parallel torsion

Quanting Zhao,Fangyang Zheng

DOI: https://doi.org/10.48550/arxiv.2208.03071

2022-01-01

Abstract: In this article, we study Hermitian manifolds whose Bismut-Strominger connection has parallel torsion tensor, which will be called {\em Bismut torsion parallel manifolds,} or {\em BTP} manifolds for short. We obtain a necessary and sufficient condition characterizing this class in terms of the curvature tensor. In particular, Bismut flat or Bismut K\"ahler-like manifolds are {\em BTP} manifolds, known by our earlier results. We also obtain structural results for non-balanced {\em BTP} manifolds, and classification theorems for non-balanced {\em BTP} threefolds and balanced {\em BTP} threefolds.
Möbius Geometry of Hypersurfaces with Constant Mean Curvature and Scalar Curvature

Haizhong Li,Changping Wang

DOI: https://doi.org/10.1007/s00229-003-0383-3

2003-01-01

manuscripta mathematica

Abstract:Let $x:{\bf M}^m\rightarrow {\bf S}^{m+1}$ be a hypersurface in the (m+1)-dimensional unit sphere S m+1 without umbilics. Four basic invariants of x under the Möbius transformation group in S m+1 are a Riemannian metric g called Möbius metric, a 1-form Φ called Möbius form, a symmetric (0,2) tensor A called Blaschke tensor and symmetric (0,2) tensor B called Möbius second fundamental form. In this paper, we prove the following classification theorem: let $x:{\bf M}^m\rightarrow {\bf S}^{m+1}$ be a hypersurface, which satisfies (i) Φ≡0, (ii) A+λg+μB≡0 for some functions λ and μ, then λ and μ must be constant, and x is Möbius equivalent to either (i) a hypersurface with constant mean curvature and scalar curvature in S m+1 ; or (ii) the pre-image of a stereographic projection of a hypersurface with constant mean curvature and scalar curvature in the Euclidean space R m+1 ; or (iii) the image of the standard conformal map of a hypersurface with constant mean curvature and scalar curvature in the (m+1)-dimensional hyperbolic space H m+1 . This result shows that one can use Möbius differential geometry to unify the three different classes of hypersurface with constant mean curvature and scalar curvature in S m+1 , R m+1 and H m+1 .
Positivity of Intersections and Tameness of Almost Complex 4-manifolds

Spencer Cattalani

2024-01-31

Abstract:We prove that pseudoholomorphic curves intersect complex 2-cycles positively in almost complex 4-manifolds. This makes possible a general and conceptually simple proof that an almost complex 4-manifold with many curves admits a taming symplectic structure, as envisioned by Gromov. Furthermore, we prove that the positivity of intersections between pseudoholomorphic curves is stable, in a geometric sense.

Symplectic Geometry,Differential Geometry
On Gauduchon Kähler-like Manifolds

Zhao Quanting,Zheng Fangyang

DOI: https://doi.org/10.1007/s12220-022-00868-5

2022-01-01

Journal of Geometric Analysis

Abstract:In a paper by Angella, Otal, Ugarte, and Villacampa, the authors conjectured that on a compact Hermitian manifold, if a Gauduchon connection other than Chern or Strominger is Kähler-like, then the Hermitian metric must be Kähler. They also conjectured that if two Gauduchon connections are both Kähler-like, then the metric must be Kähler. In this paper, we discuss some partial answers to the first conjecture, and give a proof to the second conjecture. In the process, we discovered an interesting `duality' phenomenon amongst Gauduchon connections, which seems to be intimately tied to the question, though we do not know if there is any underlying reason for that from physics.
ON COMPACT 3-MANIFOLDS WITH NONNEGATIVE SCALAR CURVATURE WITH A CMC BOUNDARY COMPONENT

Pengzi Miao,Naqing Xie

DOI: https://doi.org/10.1090/tran/7500

IF: 1.3529

2018-01-01

Transactions of the American Mathematical Society

Abstract:We apply the Riemannian Penrose inequality and the Riemannian positive mass theorem to derive inequalities on the boundary of a class of compact Riemannian 3-manifolds with nonnegative scalar curvature. The boundary of such a manifold has a CMC component, i.e., a 2-sphere with positive constant mean curvature; and the rest of the boundary, if nonempty, consists of closed minimal surfaces. A key step in our proof is the construction of a collar extension that is inspired by the method of Mantoulidis-Schoen.
Rigidity of Compact Manifolds and Positivity of Quasi-Local Mass

Yuguang Shi,Luen-Fai Tam

DOI: https://doi.org/10.1088/0264-9381/24/9/013

IF: 3.5

2007-01-01

Classical and Quantum Gravity

Abstract:In this paper, we obtain some rigidity theorems on compact manifolds with nonempty boundary. The results may be related to the positivity of some quasi-local mass of Brown–York type. The main argument is to use monotonicity of quantities similar to the Brown–York quasi-local mass in a foliation of quasi-spherical metrics. Together with a hyperbolic version of positivity of a mass quantity, we obtain our main results.
A note on compact homogeneous manifolds with Bismut parallel torsion

Fabio Podestà,Fangyang Zheng

DOI: https://doi.org/10.48550/arxiv.2310.14002

2023-01-01

Abstract: In this article, we investigate the class of Hermitian manifolds whose Bismut connection has parallel torsion ({\rm BTP} for brevity). In particular, we focus on the case where the manifold is (locally) homogeneous with respect to a group of holomorphic isometries and we fully characterize the compact Chern flat {\rm BTP} manifolds. Moreover we show that certain compact flag manifolds are {\rm BTP} if and only if the metric is K\"ahler or induced by the Cartan-Killing form and we then characterize {\rm BTP} invariant metrics on compact semisimple Lie groups which are Hermitian w.r.t. a Samelson structure and are projectable along the Tits fibration. We state a conjecture concerning the question when the Bismut connection of a BTP compact Hermitian locally homogeneous manifold has parallel curvature, giving examples and providing evidence in some special cases.
On Kähler manifolds with non-negative mixed curvature

Jianchun Chu,Man-Chun Lee,Jintian Zhu

2024-08-26

Abstract:In this work, we investigate compact Kähler manifolds with non-negative or quasi-positive mixed curvature coming from a linear combination of the Ricci and holomorphic sectional curvature, which covers various notions of curvature considered in the literature. Specifically, we prove a splitting theorem, analogous to the Cheeger-Gromoll splitting theorem, for complete Kähler manifolds with non-negative mixed curvature containing a line, and then establish a structure theorem for compact Kähler manifolds with non-negative mixed curvature. We also show that the Hodge numbers of compact Kähler manifolds with quasi-positive mixed curvature must vanish. Both results are based on the conformal perturbation method.

Differential Geometry,Complex Variables

Duality of H1 and BMO on Positively Curved Manifolds and Their Characterizations

Duality of H 1 and BMO on positively curved manifolds and their characterizations

On the Planar Dual Minkowski Problem

Rational curves on Hermitian manifolds

Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

A Proof of a Conjecture of Marino-Vafa on Hodge Integrals

A REPRESENTATION THEOREM OF HARMONIC FUNCTIONS AND ITS APPLICATION TO BMO ON MANIFOLDS

Curvature characterization of Hermitian manifolds with Bismut parallel torsion

Nonpostively curved Hermitian metric on product manifolds

Mixed Hodge-Riemann Bilinear Relations and M-Positivity

Curvature Characterization of Certain Bounded Domains of Holomorphy

On Kähler Manifolds with Positive Orthogonal Bisectional Curvature

ON COMPLETE SUBMANIFOLDS WITH PARALLEL MEAN CURVATURE IN NEGATIVE PINCHED MANIFOLDS

On Hermitian manifolds with Bismut-Strominger parallel torsion

Möbius Geometry of Hypersurfaces with Constant Mean Curvature and Scalar Curvature

Positivity of Intersections and Tameness of Almost Complex 4-manifolds

On Gauduchon Kähler-like Manifolds

ON COMPACT 3-MANIFOLDS WITH NONNEGATIVE SCALAR CURVATURE WITH A CMC BOUNDARY COMPONENT

Rigidity of Compact Manifolds and Positivity of Quasi-Local Mass

A note on compact homogeneous manifolds with Bismut parallel torsion

On Kähler manifolds with non-negative mixed curvature