Abstract:The transient flow model of a scroll refrigeration compressor which included axial clearance was established in the paper using PUMPLINX based on the computational fluid dynamics and the dynamic grid methodology. According to the actual size in the physical compressor, the flank and the axial clearances were set equal to 0.030 mm and 0.015 mm, respectively. As the fluid domain of the axial clearance was too small to generate enough layers of grids in PUMPLINX, it was first magnified 100 times to generate grids of high quality, and then the fluid domain and grids were recompressed to the original size. The simulation results were verified experimentally. The influence of the radial leakage on the downstream flow field was investigated. Moreover, the characteristics of radial and tangential leakage flows were analyzed. It was concluded that the predictions of the compressor performance, except the discharge temperature, are improved after the axial clearance was included in the model. The radial leakage is dominant while a portion of involute leakage flow exists near the flank clearance. The influence of radial leakage on the downstream temperature is lower than that of the tangential leakage in flank clearance. The tangential leakage flow is turbulent basically while the radial leakage flow is laminar. The tangential leakage is severer at the beginning of the discharge process, and the radial leakage is more remarkable at the end of the compression process. When the pressure ratio across the leakage path is higher than the critical pressure ratio, the tangential leakage flow becomes supersonic for the converging–diverging clearance structure, while the radial leakage flow remains subsonic due to the larger flow losses. The results obtained through this research could be applied to modify the current leakage models and optimize the clearances of scroll compressors.

Influence of Profile Parameters on Radial Leakage Line Length of Variable Tooth Thickness Scroll Compressor

Theoretical Calculation of Leakage in Micro Scroll Compressors

A Reverse Engineering Method of the Profile Equations of Scroll Compressors

Study on the Contact and Size of Radial and Flank Leakage Gaps of Scrolls in a Scroll Compressor with CFD/CSM Simulations

Numerical analysis of the transient leakage flow in axial clearance of a scroll refrigeration compressor

Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle

Study on a variable wall thickness profile of electric scroll compressor used for automobile air conditioner

The Effect of Scroll Wraps on the Performance of Scroll Compressors

Impact of micro-grooves in scroll wrap tips on the performance of a trans-critical CO2 scroll compressor

Modeling and analysis of a novel CPSC/CI combined profile for scroll compressors

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

Analysis of 3D Transient Flow in a High-Speed Scroll Refrigeration Compressor

A Comparative Analysis of Different Tooth Number Profile Lines of Twin-screw Multiphase Pump

Research and Analysis on the Radial Clearance Leakage for Translational Rotary Compres-sors

A General Geometrical Model of Scroll Compressors Based on Discretional Initial Angles of Involute

Study on Leakage via the Radial Clearance in a Double Vane Ellipse Rotor Compressor

Research on Cylinder Profile of Rotary Vane Compressor

Unsteady Leakage Flow Through Axial Clearance of an ORC Scroll Expander

Study on Geometric Model of Scroll Compressor

Unsteady characteristic and flow mechanism of a scroll compressor in small-scale compressed air energy storage system

Mathematical Modeling of Scroll Refrigeration Compressors