Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Fouling Mitigation in Heat Exchanger Network Through Process Optimization

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Interaction of Heat Transfer Enhancement and Fouling in Operating Heat Exchangers

Fouling Prediction of a Heat Exchanger Based on Wavelet Neural Network Optimized by Improved Particle Swarm Optimization Algorithm

Optimization Strategies of Heat Transfer Systems with Consideration of Heat Transfer and Flow Resistance

Experimental/Numerical Investigation and Prediction of Fouling in Multiphase Flow Heat Exchangers: A Review

Targeting and Design of Work and Heat Exchange Networks

Optimization-based framework for the synthesis of heat exchanger networks incorporating controllability

Experimental and statistical analysis on the effects of fouling and effective parameters on performance of heat exchanger

Cleaning Schedule Optimization of Heat Exchanger Networks Using Particle Swarm Optimization

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

Experimental and numerical investigation on the fouling of a river water source heat pump system

A Direct Optimal Control Strategy of Variable Speed Pumps in Heat Exchanger Networks and Experimental Validations

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Heat exchanger network optimisation considering different shell-side flow arrangements

Multi-objective optimization and sensitivity analysis of offset strip fin compact heat exchangers

A Collaborative Optimization Method for Heat Transfer Systems Based on the Heat Current Method and Entransy Dissipation Extremum Principle