Future prospects: polymer part

Minhao Yang,Zhi-Min Dang

DOI: https://doi.org/10.1049/pbpo158e_ch11

2020-01-01

Abstract:Driven by an urgent need for the development of high-power energy storage devices, both scientists and engineers pay increasing attention to the electrostatic capacitor, which possesses the highest power density among various types of energy storage technologies [1-5]. As the passive electronic component, electrostatic capacitor stores and releases electrical energy through rapid electric field induced polarization and depolarization. In its simplest form, electrostatic capacitor consists of two electrically conductive plates and a dielectric layer. Among various types of electrostatic capacitors, the film capacitor using an insulating polymeric film as the dielectric layer is highly desirable in the electric power systems due to the high electrical breakdown strength (Eb) of the polymeric film. However, the miniaturization of the power system and the realization of compact energy storage technologies are severely hindered by the low volumetric energy density and operating temperature of the polymeric film. For example, the energy density of biaxially oriented polypropylenes (BOPP), the best commercially available film with a market share of 50%, is merely 1-2 J/cm 3 , which is at least one order of magnitude lower than those of electrochemical supercapacitors and batteries. Additionally, the highest operating temperature for BOPP film is limited to 105 °C due to the low melting temperature of PP resin. As a result, an extra cooling system is required to decrease the environmental temperature so that the BOPP film capacitor can be operated at a safe temperature, accordingly leading to the dramatic increases in the weight, volume and cost of the power system. Therefore, improvements in the energy density and operating temperature of the polymeric film have become essential for the development of advanced film capacitors.