Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

Ultrahigh Energy Density Achieved at High Efficiency in Dielectric Capacitors by Regulating Α‐phase Crystallization in Polypropylene Films with Fluorinated Groups

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Polymer-based materials for achieving high energy density film capacitors

Dielectric Properties’ Synergy of Stretched P(VDF-HFP) and P(VDF-HFP)/PMMA Blends Creates Ultrahigh Capacitive Energy Density in All-Organic Dielectric Films

Ultrahigh polar phase content PVDF-based composite films with ultralow filler loading for high-energy-density flexible capacitors

Dielectric Film with High Energy Density Based on Polypropylene/maleic Anhydride-Grafted Polypropylene/boron Nitride Nanosheet Ternary System

Poly(tetrafluoroethylene-hexafluoropropylene) Films with High Energy Density and Low Loss for High-Temperature Pulse Capacitors

Realizing Ultrahigh Energy Density in Polymer Dielectric Film by Intermolecular Structure Design

High Field Antiferroelectric-like Dielectric of Ploy(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)-graft-Poly(styrene-methyl methacrylate) for High Pulse Capacitors with High Energy Density and Low Loss

Curly-Packed Structure Polymers for High-Temperature Capacitive Energy Storage

Tailoring Poly(styrene‐co‐maleic anhydride) Networks for All‐Polymer Dielectrics Exhibiting Ultrahigh Energy Density and Charge‐Discharge Efficiency at Elevated Temperatures

Poly(vinylidene Fluoride) Terpolymer and Poly(methyl Methacrylate) Composite Films with Superior Energy Storage Performance for Electrostatic Capacitor Application

All Polymer Dielectric Films for Achieving High Energy Density Film Capacitors by Blending Poly(Vinylidene Fluoride-Trifluoroethylene-Chlorofluoroethylene) with Aromatic Polythiourea

Improving the Energy Density and Efficiency of the Linear Polymer PMMA with a Double-Bond Fluoropolymer at Elevated Temperatures

High-temperature Polymer Dielectric Films with Excellent Energy Storage Performance Utilizing Inorganic Outerlayers

One-step fabricating high energy storage polymer film with wide bandgap and high melting temperature induced by fluorine effect for high temperature capacitors applications with ultra-high efficiency

High-Field Antiferroelectric Behavior And Minimized Energy Loss In Poly(Vinylidene-Co-Trifluoroethylene)-Graft-Poly(Ethyl Methacrylate) For Energy Storage Application

Low-entropy amorphous dielectric polymers for high-temperature capacitive energy storage

Enhanced Energy Storage Properties of Four-Layer Composite Films via Strategic Macrointerface Modulation

Polymer dielectrics sandwiched by medium-dielectric-constant nanoscale deposition layers for high-temperature capacitive energy storage

Biodegradable Poly( l -Lactic Acid) Films with Excellent Cycle Stability and High Dielectric Energy Storage Performance