Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

Epoxy/PVDF/Epoxy Composite Film with Concurrent Enhancement in Energy Density and Charge-discharge Efficiency

Poly(vinylidene Fluoride) Terpolymer and Poly(methyl Methacrylate) Composite Films with Superior Energy Storage Performance for Electrostatic Capacitor Application

Enhanced Energy Storage Properties of Four-Layer Composite Films via Strategic Macrointerface Modulation

Ultrahigh polar phase content PVDF-based composite films with ultralow filler loading for high-energy-density flexible capacitors

All Polymer Dielectric Films for Achieving High Energy Density Film Capacitors by Blending Poly(Vinylidene Fluoride-Trifluoroethylene-Chlorofluoroethylene) with Aromatic Polythiourea

Research on Epoxy-Based Nanocomposites with High Energy Density and Charge-Discharge Efficiency Filled with Ti02 Nanofibers

All-Organic Sandwich-Structured Bopp/Pvdf/Bopp Dielectric Films with Significantly Improved Energy Density and Charge-Discharge Efficiency

Tunable Dielectric Polarization and Breakdown Behavior for High Energy Storage Capability in P(VDF-TrFE-CFE)/PVDF Polymer Blended Composite Films.

Polymer-based materials for achieving high energy density film capacitors

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Enhanced Energy Density and Efficiency of All-Organic Composites by Designing a Multilayer Gradient Structure

All-Organic PTFE Coated PVDF Composite Film Exhibiting Low Conduction Loss and High Breakdown Strength for Energy Storage Applications

Enhanced electric polarization and breakdown strength in the all-organic sandwich-structured poly(vinylidene fluoride)-based dielectric film for high energy density capacitor

Core–shell structured PVDF-based copolymer fiber design for high energy storage performance

Voltage-Assisted 3d Printing of Polymer Composite Dielectric Films with Low Energy Loss and High Energy Storage Density

Two-Dimensional Fillers Induced Superior Electrostatic Energy Storage Performance in Trilayered Architecture Nanocomposites

Gradient Ethylene-Styrene Copolymer Nanocomposites Towards High Energy Storage Capability

Enhanced energy density and efficiency of all-organic composites by designing multilayer gradient structure

High energy density and efficiency achieved in nanocomposite film capacitors via structure modulation

Enhancing Discharged Energy Density and Suppressing Dielectric Loss of Poly(vinylidene Fluoride‐ter‐trifluoroethylene‐ter‐chlorofluoroethylene) by a Sandwiched Structure

Poly(vinylidene Fluoride-Co-chlorotrifluoroethylene) and Polyurea Composite with Enhanced Energy Storage Properties