Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Low-pressure ratio conditions are commonly encountered in radial turbines. When operating at low pressure ratio condition, a significant portion of the turbine energy loss occurs as residual velocity loss in the form of swirling flow at the outlet pipe. Typically, this energy can be recovered by the next stage turbine or reduced by the diffuser. However, there is a lack of experimental and simulation studies on the swirling flow at the outlet of turbines. The mechanism governing the changing pattern of swirling flow remains unclear, limiting the effective utilization and reduction of residual velocity loss. This study conducts theoretical and experimental research on turbine outlet swirling flow. Firstly, this paper introduces a novel two-dimensional hot-wire anemometry stepping mechanism for measuring swirling flow at a turbine outlet cross-section. Experimental results demonstrate that the proposed measurement method effectively captures the morphological changes of turbine outlet swirling flow. The results indicate a strong coupling relationship between axial and circumferential velocity. Subsequently, to elucidate the reasons for the coupling of velocity in two directions and the development of swirling flow in the outlet pipeline, simulations of turbine performance under different velocity ratio conditions were conducted. Results show that under a wide range of velocity ratios, not only does the direction of the turbine outlet swirling flow change, but it also leads to the swirl number exceeding the critical swirl ratio under high velocity ratio conditions, resulting in the formation of a central recirculation zone (CRZ) at the pipe outlet. The main cause of the strong coupling effect between velocities in two directions is attributed to the increased swirl intensity leading to enhanced adverse pressure gradients at the core of the vortex. Lastly, a model describing the variation of VGT turbine outlet swirling flow is established, indicating a linear relationship between the swirl number and the velocity ratio, with a steeper change as the pressure ratio decreases.

Statistical and Computational Evaluation of Axial Loss Correlations Applied to Centrifugal Turbines

Statistical and Computational Evaluation of Empirical Axial Turbine Correlations in Design of Centrifugal Turbines

Numerical Investigation of Partial Admission Losses in Radial Inflow Turbines

A Reliable Update of the Ainley and Mathieson Profile and Secondary Correlations

Statistical Investigations of Profile Error Impact on Flow and Performance of a Low-Pressure Turbine Cascade

Characterization of Loss, Temperature, and Stress on Partial Admission Axial Impulse Turbines with Liquid Jet Impingement Cooling

An Investigation on AerofoilShaped Blade Profiles for Centrifugal Turbines

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

A study on different loss models in axial-flow turbines based on the methed of straemline-curvature

A Method to Select Loss Correlations for Centrifugal Compressor Performance Prediction

Aerodynamic Design and Experimental Validation of High Pressure Ratio Partial Admission Axial Impulse Turbines for Unmanned Underwater Vehicles

Accuracy and Consistency of CFD and Engineering Models for Simulating Vertical Axis Wind Turbine Loads

Research on Calculation of Turbine Loss Models Based on Experienced Method

Case studies on performance prediction of radial inflow turbine under multiple rotor structures and organic fluids

Rapid Performance Prediction Model of Axial Turbine with Coupling One-Dimensional Inverse Design and Direct Analysis

Minimization of loss in small scale axial air turbine using CFD modeling and evolutionary algorithm optimization

Experimental and simulation study of energy loss mechanism of low pressure ratio radial turbine

Quasi-one-dimensional Loss Model of Volute Using Boundary Layer Approach for Inward Flow Radial Supercritical CO2 Turbines

Reduced-dimensional Prediction Method for the Axial Aerodynamic Forces in the Off-Design Operation of Near-Critical CO2 Centrifugal Compressors

Experimental and Numerical Investigation of Loss in Turbine Cascade with Low Reynolds Number

Predicting the Profile Loss of High-Lift Low Pressure Turbines