Quasi-one-dimensional Loss Model of Volute Using Boundary Layer Approach for Inward Flow Radial Supercritical CO2 Turbines

Syed Jiaul Hoque,Pramod Kumar,Pramod Chandra Gopi

DOI: https://doi.org/10.1115/1.4063548

2023-09-29

Journal of Engineering for Gas Turbines and Power

Abstract:Abstract Inward flow radial sCO2 turbines operate at considerably higher speeds than conventional gas or steam turbines making only the low specific speed designs practically realizable. Low specific speed designs suffer from significantly high viscous losses in the volute due to long and narrow flow passages. The volute loss in low specific speed designs causes an 8-12% efficiency drop, approximately 50% of the total loss. The paper proposes a quasi-one-dimensional model to estimate the total pressure loss of a volute with acceptable accuracy while consuming negligible computational power compared to a three-dimensional CFD simulation. The model converts the three-dimensional flow of a volute into an equivalent quasi-1D flow. Boundary layer-based momentum integral method is used on the quasi-1D flow path to calculate the total pressure loss. A computer program is developed to implement the proposed model. The accuracy of the model is tested with three-dimensional CFD results in the kW to MW power scale for different boundary conditions. The validation study is conducted for two volute cross-sections - circular and trapezoidal, to check the universality of the model. The model estimates the total pressure loss with less than 10% error for all test conditions. For the same conditions, a fully developed pipe flow model shows a considerably high error (~50%) in total pressure loss prediction. The model can also accurately calculate losses under off-design operations and volute with surface roughness.

engineering, mechanical