Abstract:All-solid-state lithium batteries (ASSB) have emerged as key components in energy storage applications owing to their superior safety characteristics and high energy density. The use of sulfide solid electrolytes has considerably promoted the development of all-solid-state lithium batteries because of advantages such as a high ionic conductivity, formability, and good interface compatibility with electrodes. In this review, we first discuss the issues hindering the use of sulfide-based all-solid-state lithium batteries, focusing on aspects related to the cathode/electrolyte interface, sulfide solid electrolytes, and the anode/electrolyte interface. At the cathode/electrolyte interface, interfacial side reactions inherently occur due to the narrow electrochemical window of sulfide electrolytes when used with high-voltage cathode materials, which degrades the battery performance. In addition, owing to the chemical potential difference between cathode materials and sulfide solid electrolytes, the space-charge layer generated due to the formation of a lithium depletion layer is also detrimental to the cell performance. To overcome these difficulties, inert coatings, replacing sulfide solid electrolytes with halide solid electrolytes, and replacing frequently used transitional metal oxide cathode materials with other materials that are better suited for sulfide solid electrolytes to modify the composite cathode have been explored. Improvements in the ionic conductivity and air stability are imperative for sulfide solid electrolytes. Strategies to optimize the solid electrolyte have mainly focused on doping or adjusting the synthesis routes of the sulfide solid electrolyte, which have resulted in notable improvements. At the anode/electrolyte interface, lithium dendrite formation and interfacial reactions between lithium metal and the sulfide solid electrolyte are the most notable challenges. Using artificial solid electrolyte interfaces with a low electronic conductivity, employing an alloy anode, and synthesizing composite electrolytes are typical approaches for overcoming these problems. In addition, from the perspective of the practical production of sulfide-based all-solid-state lithium batteries, electrode/electrolyte membrane-forming technology and the assembly of pouch cells are introduced. Membrane-forming technology has gained extensive attention with the aim of fabricating thin and mechanically stronger solid electrolyte membranes. High-loading cathode membranes as well as solid electrolyte membranes, dry processing, and wet processing are reviewed. Moreover, the improvement in the solid-solid contact of pouch cells, the design of high-loading cathodes, and the low-cost and scaled up production of sulfide solid electrolytes are introduced. Finally, we also propose research directions and future development trends for sulfide-based all-solid-state lithium batteries.

Cover Feature: Slurry‐Coated Sulfur/Sulfide Cathode with Li Metal Anode for All‐Solid‐State Lithium‐Sulfur Pouch Cells (batteries & Supercaps 7/2020)

Cover Feature: All‐Solid‐State Lithium–Organic Batteries Comprising Single‐Ion Polymer Nanoparticle Electrolytes (chemsuschem 9/2020)

Slurry‐Coated Sulfur/Sulfide Cathode with Li Metal Anode for All‐Solid‐State Lithium‐Sulfur Pouch Cells

Chloride‐Reinforced Carbon Nanofiber Host As Effective Polysulfide Traps in Lithium–Sulfur Batteries

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

Nano‐Scale Interface Engineering of Sulfur Cathode to Enable High‐Performance All‐Solid‐State Li–S Batteries

Cathode-Supported-Electrolyte Configuration for High-Performance All-Solid-State Lithium–Sulfur Batteries

Cover Feature: Construction of All-Solid-State Batteries based on a Sulfur-Graphene Composite and Li<sub>9.54</sub> Si<sub>1.74</sub> P<sub>1.44</sub> S<sub>11.7</sub> Cl<sub>0.3</sub> Solid Electrolyte (Chem. Eur. J. 56/2017)

Toward the Practical and Scalable Fabrication of Sulfide‐Based All‐Solid‐State Batteries: Exploration of Slurry Process and Performance Enhancement Via the Addition of LiClO4

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Tailoring the Interface between Sulfur and Sulfide Solid Electrolyte for High-Areal-Capacity All-Solid-State Lithium–Sulfur Batteries

A new high-capacity cathode for all-solid-state lithium sulfur battery

Confining Sulfur in Porous Carbon by Vapor Deposition to Achieve High-Performance Cathode for All-Solid-State Lithium–Sulfur Batteries

Unveiling the Role of Electric Double-Layer in Sulfur Catalysis for Batteries

Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects

Designing High-Performance Sulfide-Based All-Solid-State Lithium Batteries: from Laboratory to Practical Application

Design of coatings for sulfur‐based cathode materials in lithium‐sulfur batteries: A review