Abstract:International Journal of Aeroacoustics, Ahead of Print. The accurate prediction of the trailing-edge noise and the determination of its sources are essential to reduce fans and propellers noise. This noise component is due to the scattering of the turbulent boundary layer into acoustic waves by the trailing edge. In this paper, the noise emanating from a CD (Controlled-Diffusion) airfoil is simulated and computed via the hybrid methods of aeroacoustics. In these methods, the aerodynamic and acoustic fields are computed separately. The flow data are obtained using the in-house LES solver SFELES. ACTRAN acoustic solver has been used to solve the acoustics and to provide the near and far fields propagation via Lighthill's analogy. Curle's analogy is applied as well in its integral compact formulation which takes the presence of walls into account. Curle's formulation is applied proposing an approach where the volume and surface integrals have been implemented in SFELES to be calculated simultaneously with the flow in order to avoid the storage of noise sources which requires a huge space. In Lighthill's analogy, sources and near field maps show that the turbulent boundary layer and wake are the more efficient sources and the center of radiation is the trailing edge. The comparison of the numerical results with the experimental measurements, performed by Moreau and Roger and Moreau et al. , shows an overall excellent agreement confirming the capability of SFELES (LES sources) combined with ACTRAN (Lighthill's analogy) to predict correctly the noise generated by turbulent flows around airfoils. The acoustic spectrum presents an overprediction up to 5 dB at the frequencies 300 Hz and 550 Hz and an underprediction about 5 dB at the frequencies 1100 Hz and 1750 Hz. The sound pressure level (SPL) obtained using the proposed approach of Curle's analogy matches very well the experimental results. Thus, Curle's analogy can be used to obtain a fast, approximated and acceptable results about the noise radiation of airfoils avoiding the storage of noise sources which requires a huge space and time.

Withdrawal: Mesh Study for Airfoil Trailing Edge Noise Predictions Using RANS CFD

Withdrawal: Wall-Modeled Large-Eddy Simulation of Trailing Edge Finlets with Surface Roughness

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

High Accuracy Numerical Investigation of Trailing Edge Noise at Vortex Shedding Critical Angle of Attack

Efficient prediction of broadband trailing edge noise and application to porous edge treatment

A study of the effect of serration shape and flexibility on trailing edge noise

Improved Pressure Gradient Estimation for Airfoil Trailing Edge Noise Prediction Using Cartesian Grid-based RANS Method

Aeroacoustic Prediction Based on Large-Eddy Simulation and the Ffowcs Williams–Hawkings Equation

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

Cavity Flow Noise Predictions

An Analysis on the Flow Field Structures and the Aerodynamic Noise of Airfoils with Serrated Trailing Edges Based on Embedded Large Eddy Flow Simulations

The Control of Aerodynamic Sound Due to Boundary Layer Pressure Gust Scattering by Trailing Edge Serrations

Noise Reduction in Wind Turbine Airfoils with Serrated Trailing Edges: An Experimental Study in Low Turbulence Wind Tunnel

Trailing-edge broadband noise prediction of an airfoil with boundary-layer tripping

Comprehensive Study on the Slat Noise of 30P30N High-Lift Airfoil Basd on High-Order Wall-Resolved Large-Eddy Simulation

Aeroacoustic investigation of multi-directional wings aligned in tandem under wing-in-ground effect

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

On the effect of velvet structures on trailing edge noise: experimental investigation and theoretical analysis

Numerical Investigation of a Porous Trailing Edge by a Zonal RANS/LES Simulation

Mesh and model requirements for capturing deep-stall aerodynamics in low-Mach-number flows

Influence of the liner-type treatment on the trailing-edge noise generated by a flat plate