Abstract:Spent IERs are released during the operation and decommissioning of nuclear facilities. The safe and efficient treatment of spent IERs is an emergent problem in nuclear industry. IRN77 is a typical ion exchange resin widely used in many nuclear power plants. Fenton process can degrade organic resins and reduce the radioactive residues volume and the disposal cost significantly. In this work, the IRN77 resin was selected as a model ion exchange resin and its treatment via Fenton process was investigated. The influencing factors for resin degradation, including catalyst dosage, reaction time, initial pH, temperature and oxidant dosage were investigated and optimized via the single-factor experimental method. Under the reaction temperature of 100 degrees C and reaction time of 120 min at initial pH of 2, more than 97% COD was removed with 1.66 g H2O2 and 32 mg FeSO4.7H(2)O added to per gram of wet resin. The catalyst dosage and H2O2 dosage can decrease 78% and 50% respectively compared to previous results. SEM, FT-IR and ion chromatograph were employed to characterize the resin beads, soluble organics and intermediates during the degradation reaction. Based on the characterization results, the resin degradation pathway was discussed in detail and it is proposed to three stages including beads dissociation, styrene and divinylbenzene decomposition and carboxylic acids mineralization. During the IERs degradation, formic acid, acetic acid, propionic acid and oxalic acid were quantitatively monitored as main intermediates, and oxalic acid accounted for over 90% of COD in the final residue solution. Fenton process is suggested as a promising resin degradation method.

Decomposition of spent radioactive ion‐exchange resin using photo‐ <scp>Fenton</scp> process

Decomposition of Spent Radioactive Ion‐exchange Resin Using Photo‐fenton Process

Degradation of Spent Radioactive Ion Exchange Resins and Its Mechanisms by Fenton Process

Disintegration and dissolution of spent radioactive cationic exchange resins using Fenton-like oxidation process

Treatment of Spent Radioactive Anionic Exchange Resins Using Fenton-like Oxidation Process

A Comparison of Spent Resin Degradation by Fenton and O3-Fenton Process

Treatment of spent radioactive cationic exchange resins used in nuclear power plants by Fenton-like oxidation process

Optimization of Spent Radioactive Resins Degradation by Fenton‐like Oxidation Using Response Surface Methodology

Decomposition mechanisms of nuclear-grade cationic exchange resin by advanced oxidation processes: Statistical molecular fragmentation model and DFT calculations

Dissolution and degradation of nuclear grade cationic exchange resin by Fenton oxidation combining experimental results and DFT calculations

Degradation of the mixed nuclear-grade cationic and anionic exchange resins using Fe2+/H+ homogeneous Fenton oxidation

TREATMENT OF DYING WASTEWATER BY THE PHOTO-FENTON PROCESS

Enhanced Heterogeneous Fenton-like Degradation of Nuclear-Grade Cationic Exchange Resin by Nanoscale Zero-Valent Iron: Experiments and DFT Calculations

Photochemical PFAS Degradation in Ion Exchange Resin Regeneration Brine: Effects of Water Matrix Components and Technical Solutions

Photo-Fenton Oxidation Processes Used in the Degradation of Rhodamine B

Co2+/PMS based sulfate-radical treatment for effective mineralization of spent ion exchange resin

Treatment and disposal of spent radioactive ion-exchange resins produced in the nuclear industry

Treatment of wastepaper pulp effluents by photo-Fenton process

Fenton oxidative degradation of spent organic solvents from nuclear fuel reprocessing plant

Decomposition of Organic Resin by Radio-Sensitive Photocatalyst

Photoassisted Fenton degradation of polystyrene.