Abstract:There are many nanoparticle preparation techniques such as the biological approach sol-gel method and physical methods, etc. However, the co-precipitation approach requires few chemical reagents and reaction time as well as produces highly pure products with comparatively lower costs among the available techniques. In present work co-precipitation method is use to synthesize magnetic iron oxide (Fe 3 O 4 ) nanoparticles, followed by characterization to check its applicability and the presence of undesired substrate. UV–visible spectroscopy, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FTIR) were examined to determine the synthesized Fe 3 O 4 nanoparticles. The nanoparticles' sizes lies between 1 nm to 100 nm, according to the SEM and HR-TEM analyses. XRD measurements verified the crystalline characteristics of the Fe 3 O 4 nanoparticles. Dielectric spectroscopy of synthesized Fe 3 O 4 nanoparticle pellets has been investigated at a wide frequency range 0.1 to 10 5 Hz. Capacitance and dielectric permittivity of Fe 3 O 4 nanoparticles decrease continuously with frequency as dipole gets less time to orient in the field. The dielectric permittivity of Fe 3 O 4 pellets increases up to 3 mm thickness and subsequently drops, perhaps because a rise in resistance. The electrical conductivity of Fe 3 O 4 rises exponentially with frequency. According to the dielectric studies, the dielectric permittivity and electrical conductivity of Fe 3 O 4 are greatly dependent on the thickness and extent of frequency. Additionally, the dielectric impedance of Fe 3 O 4 pellets has also been investigated as a function of frequency.

Synthesis of Fe<sub>3</sub>O<sub>4</sub> Magnetic Nanoparticles in a Helical Microreactor

Synthesis and Characterisation of Transition Metal Iron Oxide Nanocomposite Crystals and Particles Using Wet Chemical Coprecipitation Method

Polyol Synthesis of Superparamagnetic Fe_3O_4 Nanoparticles for Magnetic Resonance Imaging

Ferromagnetic Fe3O4 Nanofibers: Electrospinning Synthesis and Characterization

Synthesis of Monodispersed Fe3O4 Magnetite Nanoparticles by ethylene glycol solvothermal method

Synthesis of Fe3O4 Nanoparticles and Their Magnetic Properties

Solvothermal Synthesis and Magnetic Property of Monodispersed Fe_3O_4 Nano-powders

Size-controlled synthesis of Fe3O4 and Fe3O4@SiO2 nanoparticles and their superparamagnetic properties tailoring

Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles

Synthesis of N-Hexadecylphosphonic Acid-Coated Monodisperse Fe3O4 Superparamagnetic Nanoparticles

Preparation and Surface Modification of Fe<sub>3</sub>O<sub>4 &Lt;/sub>nano-Magnetic Powders

Preparation and characterization of Fe3O4 nanoparticles via a hydrothermal process with propanediol as the solvent

Radiation-Induced Synthesis and Superparamagnetic Properties of Ferrite Fe3O4 Nanoparticles

Synthesis of Fe$_3$O$_4$ nanoparticles and their magnetic properties

Preparation, Surface Functionalization and Application of Fe3O4 Magnetic Nanoparticles

Preparation and Characterization of Fe<sub>3</sub>O<sub>4</sub>@Au Nanoparticles Used As Precursor of Ferrofluids

The Oriented Self‐Assembly of Magnetic Fe3O4 Nanoparticles into Monodisperse Microspheres and Their Use As Substrates in the Formation of Fe3O4 Nanorods

Synthesis of CoFe2O4 Nanoparticles via Solution Method and Their Magnetic Properties

Rapid Synthesis of Aqueous‐Phase Magnetite Nanoparticles by Atmospheric Pressure Non‐Thermal Microplasma and their Application in Magnetic Resonance Imaging

Preparation and Potential Applications of Super Paramagnetic Nano-Fe3O4

Synthesis, characterization, and dielectric studies of magnetic iron oxide nanoparticles

Synthesis of Fe&lt;sub&gt;3&lt;/sub&gt;O&lt;sub&gt;4&lt;/sub&gt; Magnetic Nanoparticles in a Helical Microreactor