Abstract:Oxide electrolytes show great potential in solid-state batteries due to their good stability and high ionic conductivity. However, some fatal shortcomings such as complex manufacture, large thickness, inferior flexibility and poor contact with electrodes caused by intrinsic rigidity and brittleness of oxides hinder their large-scale commercial application. Herein, an ultrathin ceramic (LAGP) membrane supported by light-weight cellulose mesh (LAC) is fabricated by a facile solution-casting method, in which a few PVDF serves as binder. Then gel electrolyte containing FEC is introduced on both sides of LAC by in-situ polymerization method to resolve the interfacial issue including poor contact and incompatibility between electrodes and LAC. The ultrathin LAC ceramic membrane presents a thickness of about 21 mu m and exhibits superior flexibility, and the obtained gel electrolyte modified ceramic-based composite electrolyte (LACF) displays ultrahigh ionic conductance (86.05 mS), wide electrochemical window (4.7 V) and high Li+ transference number (0.54) at 25 ?. More importantly, the LACF composite electrolyte shows good stability to Li anode due to the LAC membrane with high proportion of mechanically-robust ceramic particles and FEC-containing gel electrolyte interlayer, which enables stable and uniform Li stripping/plating in Li/LACF/Li cell for 300 h at 0.1 mA cm(-2). As a consequence, the LFP/LACF/Li full cell demonstrates excellent cyclic stability as the discharge capacity just shows an extremely minor decrease after 180 cycles at 0.5 C. Therefore, this work provides a novel insight for preparing flexible ceramic-based composite electrolyte which enables high-performance and safe Li metal batteries.

Lithium‐Metal Batteries: Tape‐Casting Li0.34La0.56TiO3 Ceramic Electrolyte Films Permit High Energy Density of Lithium–Metal Batteries (adv. Mater. 6/2020)

Tape-Casting Li 0.34 La 0.56 TiO 3 Ceramic Electrolyte Films Permit High Energy Density of Lithium-Metal Batteries.

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

A Multilayer Ceramic Electrolyte for All-Solid-State Li Batteries

3D Vertically Aligned Microchannel Three-Layer All Ceramic Lithium Ion Battery for High-Rate and Long-Cycle Electrochemical Energy Storage

The molding of the ceramic solid electrolyte sheet prepared by tape casting

Cellulose Mesh Supported Ultrathin Ceramic-Based Composite Electrolyte for High-Performance Li Metal Batteries

Synergistically enabling the interface stability of lithium metal batteries with soft ionic gel and garnet-type Li6.4La3Zr1.4Ta0.6O12 ceramic filler

Rational design of ultrathin composite solid-state electrolyte for high-performance lithium metal batteries

Solvent-Free and Long-Cycling Garnet-Based Lithium-Metal Batteries

In situ polymerization of 1,3-dioxolane infiltrating 3D garnet framework with high ionic conductivity and excellent interfacial stability for integrated solid-state Li metal battery

All 3D printing lithium metal batteries with hierarchically and conductively porous skeleton for ultrahigh areal energy density

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

A Long Cycle Life, All-Solid-State Lithium Battery with a Ceramic–Polymer Composite Electrolyte

A wrapped and infiltrated ∼20-μm-thick 3D ceramic framework composite enables fast Li + diffusion and interfacial compatibility for lithium-metal batteries

Lithium‐Metal Batteries: Polycationic Polymer Layer for Air‐Stable and Dendrite‐Free Li Metal Anodes in Carbonate Electrolytes (Adv. Mater. 12/2021)

Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries

In Situ Construction of an Ultra‐Stable Conductive Composite Interface for High‐Voltage All‐Solid‐State Lithium Metal Batteries

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Abundant oxygen vacancy nanotube-incorporated composite solid electrolyte boosting long-life all-solid-state batteries