Abstract:In reactor design and safety analysis, the interaction between neutronics and thermal-hydraulics is of significant importance. As an alternative and improved two-step method, the pin-by-pin scheme requires pin-wise thermal-hydraulics feedback to improve the resolution of 3D whole-core analysis. In this work, we implement an embedded coupling of the subchannel code START with the whole-core pin-by-pin calculation system NECP-Bamboo2.0 following the master–slave approach. The 2D lattice code Bamboo-Lattice2.0 in NECP-Bamboo2.0 provides the pin-wise homogenized few-group constants for the coupling system, and the 3D whole-core pin-by-pin code Bamboo-Core2.0 is coupled as the master code with a modified MPI-based START. Bamboo-Core2.0 retains its neutronics module and multi-physics coupling strategy. In contrast, START is only embedded as a slave module into the master. Both of them share the same MPI-based parallelism strategy with a block-based domain decomposition approach. Therefore, the coupling code developed in this paper has a high-level global coupling efficiency on a multi-process platform. The data exchange between neutronics and thermal-hydraulics adopts a direct block-to-block model, thus requiring no additional data interface. The coupling code is verified using the VERA#6 3D single-assembly benchmark problem and the mini-core problem based on the VERA#4 benchmark. The numerical results demonstrate that the coupling code possesses good parallel efficiency and computational precision. Compared with the single-channel model, the subchannel model can simulate the mass/momentum/energy exchange between channels accurately, and thus a more continuous coolant temperature distribution can be obtained. Meanwhile, the subchannel model is also able to reduce the maximum pin-wise coolant temperature, fuel temperature, and power peak, while the eigenvalue can be increased by about 10 pcm for the steady-state problems used for verification in this paper.

Development of a coupled neutronics and thermal hydraulics code with an advanced spatial mapping model

3D Multi-Physics Numerical Coupling of Monte Carlo Neutronics and Thermal-Hydraulic for Solid Core

Development of 3D Transient Neutronics and Thermal-Hydraulics Coupling Procedure and Its Application to a Fuel Pin Analysis

Three-Dimensional Fine-Mesh Coupled Neutronics and Thermal-Hydraulics Calculation for PWR Fuel Pins

Study of Neutronics and Thermal-Hydraulics Coupling Methodology Based on Nodal Green's Function Method

Development and verification of a neutronics-thermal hydraulics coupling code with unstructured meshes neutron transport model

Development and verification of the high-fidelity neutronics and thermal-hydraulic coupling code system NECP-X/SUBSC

An Internal Coupling Method Between Neutronics and Thermal-Hydraulics with RMC and CTF

Neutronics and Thermal-hydraulics Coupling Calculation Based on Monte Carlo and CFD Method

Preliminary Verification Of The High-Fidelity Neutronics And Thermal-Hydraulics Coupling System Necp-X/Subsc

Development and Preliminary Verification of a Neutronics-Thermal Hydraulics Coupling Code for Research Reactors with Unstructured Meshes

Coupled neutronics/thermal-hydraulics analysis of a full PWR core using RMC and CTF

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Development of Subchannel Code SUBSC for High-Fidelity Multi-Physics Coupling Application

Development of the high-fidelity neutronics and thermal-hydraulic coupling code NECP-X/SUBSC

Versatility and Stabilization Improvements of Full Core Neutronics/thermalhydraulics Coupling Between RMC and CTF

An embedded coupling design and development of NECP-Bamboo2.0 and START for PWR whole-core pin-by-pin analysis

MCS based neutronics/thermal-hydraulics/fuel-performance coupling with CTF and FRAPCON

Study on multi-scale thermal-hydraulic coupling strategy under the steady state of Xi'an pulsed reactor

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

An Internal Parallel Coupling Method Based on NECP-X and CTF and Analysis of the Impact of Thermal-Hydraulic Model to the High-Fidelity Calculations