Abstract:In reactor design and safety analysis, the interaction between neutronics and thermal-hydraulics is of significant importance. As an alternative and improved two-step method, the pin-by-pin scheme requires pin-wise thermal-hydraulics feedback to improve the resolution of 3D whole-core analysis. In this work, we implement an embedded coupling of the subchannel code START with the whole-core pin-by-pin calculation system NECP-Bamboo2.0 following the master–slave approach. The 2D lattice code Bamboo-Lattice2.0 in NECP-Bamboo2.0 provides the pin-wise homogenized few-group constants for the coupling system, and the 3D whole-core pin-by-pin code Bamboo-Core2.0 is coupled as the master code with a modified MPI-based START. Bamboo-Core2.0 retains its neutronics module and multi-physics coupling strategy. In contrast, START is only embedded as a slave module into the master. Both of them share the same MPI-based parallelism strategy with a block-based domain decomposition approach. Therefore, the coupling code developed in this paper has a high-level global coupling efficiency on a multi-process platform. The data exchange between neutronics and thermal-hydraulics adopts a direct block-to-block model, thus requiring no additional data interface. The coupling code is verified using the VERA#6 3D single-assembly benchmark problem and the mini-core problem based on the VERA#4 benchmark. The numerical results demonstrate that the coupling code possesses good parallel efficiency and computational precision. Compared with the single-channel model, the subchannel model can simulate the mass/momentum/energy exchange between channels accurately, and thus a more continuous coolant temperature distribution can be obtained. Meanwhile, the subchannel model is also able to reduce the maximum pin-wise coolant temperature, fuel temperature, and power peak, while the eigenvalue can be increased by about 10 pcm for the steady-state problems used for verification in this paper.

An embedded coupling design and development of NECP-Bamboo2.0 and START for PWR whole-core pin-by-pin analysis

Coupled neutronics/thermal-hydraulics analysis of a full PWR core using RMC and CTF

Anderson acceleration for PWR whole-core pin-by-pin Nu-TH coupling calculation in NECP-Bamboo2.0

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

An Internal Coupling Method Between Neutronics and Thermal-Hydraulics with RMC and CTF

Versatility and Stabilization Improvements of Full Core Neutronics/thermalhydraulics Coupling Between RMC and CTF

MCS based neutronics/thermal-hydraulics/fuel-performance coupling with CTF and FRAPCON

Multi-scale coupling of CFD code and sub-channel code based on a generic coupling architecture

Internal coupling between neutronics and thermal hydraulics with RMC/CTF and validation using vera benchmarks

Study of Neutronics and Thermal-Hydraulics Coupling Methodology Based on Nodal Green's Function Method

Assemblies Design and Modeling Analysis of a New Pin-by-pin Wise Fine Mesh Neutronics/thermal-Hydraulics Coupling Benchmark for Plate-Type PWR Core

Newly Developed Coupling Scheme in RMC with Internal Thermal Feedback and OTF Doppler-Broadening Method

A Parallel Coupling Framework for DEM-MBD: Model Verification and Application

A study on coupling technique and implementation of the wave-circulation coupled model

The first-principle coupled calculations using TMCC and CFX for the pin-wise simulation of LWR

Development of multi-scale thermal hydraulic analysis code, CUPID/SPACE based on implicit code coupling scheme

Research on RMC neutronics-thermal hydraulics coupling based on universal coupling methodology

PWR core calculation based on pin-cell homogenization in three-dimensional pin-by-pin geometry

A Versatile Method of Coupled Neutronics / Thermal-hydraulics Based on HDF 5

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

Coupled OpenMC/CTF to VERA Core Physics Benchmark Problem 6