Abstract:With the rapid development of high-performance computers, high-precision, multi-scale and multi-physics coupling has become one of the main research contents of nuclear energy. The coupling of neutronics and thermal-hydraulics is the basis of the multi-physics coupling; the core power and temperature distribution interact and couple with each other until the steady state is reached. Prismatic high-temperature gas-cooled reactor is one of the Generation IV nuclear reactors, which has advantages of inherent safety, high power generation efficiency and nuclear hydrogen production. This paper has developed the neutronics and thermal-fluid coupling code PHEASANT for the prismatic high-temperature gas-cooled reactor, based on the open-source multi-physics coupling platform MOOSE. PHEASANT code is applied to the MHTGR-350MW benchmark for steady-state coupling. In PHEASANT, the 3D neutronics and thermal-fluid module are developed firstly, and the “Multiapp” function suitable for steady-state coupling is also developed that realizes the Picard iteration of two modules. In addition, the “Transfer” function of the MOOSE platform is adopted to achieve the data transfer between two modules by memory. The developed PHEASANT code is applied to the MHTGR-350MW benchmark coupling, and the multi-state group constants are generated by the Monte Carlo code RMC. Results show that the axial power peak factor increases from 1.26 to 1.70, and the corresponding position of the peak value is upward. Moreover, the core’s upper part power is higher because of the lower core temperature; also, lower temperature of the lower part is due to the higher core temperature. After coupling, the inlet and outlet temperature of the coolant are unchanged, while the average temperature increases. Meanwhile, the maximum temperature of fuel and graphite decrease 39.64 °C and 35.29 °C respectively, but the average temperature increases 67.4 °C. Therefore, calculation results demonstrate that the steady-state coupling has a significant impact on the core power and temperature distribution, which proves the necessity of the neutronics and thermal-fluid coupling.

Versatility and stabilization improvements of full core neutronics/thermal-hydraulics coupling between RMC and CTF

Coupled neutronics/thermal-hydraulics analysis of a full PWR core using RMC and CTF

A Versatile Method of Coupled Neutronics / Thermal-hydraulics Based on HDF 5

An Internal Coupling Method Between Neutronics and Thermal-Hydraulics with RMC and CTF

MCS based neutronics/thermal-hydraulics/fuel-performance coupling with CTF and FRAPCON

Internal coupling between neutronics and thermal hydraulics with RMC/CTF and validation using vera benchmarks

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

Newly Developed Coupling Scheme in RMC with Internal Thermal Feedback and OTF Doppler-Broadening Method

Research on RMC neutronics-thermal hydraulics coupling based on universal coupling methodology

The first-principle coupled calculations using TMCC and CFX for the pin-wise simulation of LWR

Parallelization of subchannel thermal-hydraulic code CTF of reactor core based on domain decomposition

Research on Coupling of Neutronics and Thermal-Hydraulics Based on Stochastic Method of Neutron Transport

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Multi-scale coupling of CFD code and sub-channel code based on a generic coupling architecture

RMC/CTF Multiphysics Solutions to VERA Core Physics Benchmark Problem 9

Coupling of Rmc and Cfx for Analysis of Pebble Bed-Advanced High Temperature Reactor Core

Coupled Neutronics and Thermal-Fluid Calculation for Prismatic High-Temperature Gas-Cooled Reactor Core at Steady State

A new neutronics-thermal-mechanics multi-physics coupling method for heat pipe cooled reactor based on RMC and OpenFOAM

BEAVRS Full Core Burnup Calculation in Hot Full Power Condition by RMC Code

An embedded coupling design and development of NECP-Bamboo2.0 and START for PWR whole-core pin-by-pin analysis

Coupling RMC and CFD for Simulation of Transients in TREAT Reactor