Abstract:After the oil field enters the high water content period, the oil–water mixed fluid in the mixing system will gradually change into the water-in-oil mixed fluid, while the dissolved CO2 causes the pH value of the mixed fluid to decrease. There is also a certain amount of bacteria in the output fluid, with many factors leading to the intensification in the corrosion of the oil–water mixed system pipeline in the high water content period. To clarify its corrosion law, through the mixed transmission pipeline material, 20# carbon steel, in high water conditions under the action of different single factor dynamic corrosion rate experiments, along with the use of the SPSS method, were used to determine the corrosion of the main control factors. The results show that in the high water content period, the corrosion rate of the mixed pipeline 20# steel gradually increases with the increase in temperature pressure, CO2 partial pressure, SRB content, Ca2+ + Mg2+ content, and Cl− content. The corrosion rate with the CO2 partial pressure and SRB content changes show a strong multiplicative power relationship; with Ca2+ + Mg2+ content, Cl− content changes show a logarithmic relationship, the relationship degree R2 is above 0.98. Through SPSS data analysis software combined with experimental data for correlation degree analysis, it is concluded that the correlation magnitude relationship between each factor and corrosion rate is CO2 partial pressure > SRB content > Cl− content > Ca2+ + Mg2+ content > temperature pressure, which provides a theoretical basis for the corrosion protection of an oil gathering pipeline.

Study on Corrosion Prediction of CO2 Flooding Well

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

An Analytical Model for the Corrosion Risk of Water Alternating Gas Injection Wells in CO2 Enhanced Oil Recovery

Experimental and Numerical Study on Internal Pressure Load Capacity and Failure Mechanism of CO2 Corroded Tubing

Corrosion Status of Oil Well Pipe and Anti-corrosion Technology Development

Study on Failure Behavior of Gas Well Tubing Under CO 2 Corrosion After Erosion

Research on Wellbore Integrity Evaluation Model of CO2 Enhanced Composite Fracturing

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

Corrosion Control in CO2 Enhanced Oil Recovery from a Perspective of Multiphase Fluids

Investigation into main controlling factors and prediction model of L245NS steel corrosion rate in CO2–O2–SO2–H2S–H2O environment

Factors Influencing the CO2 Corrosion Pattern of Oil–Water Mixed Transmission Pipeline during High Water Content Period

Corrosion Inhibitor Distribution and Injection Cycle Prediction in a High Water-Cut Oil Well: A Numerical Simulation Study

RECENT DEVELOPMENTS IN CARBON DIOXIDE CORROSION OF N80 WELL TUBE STEEL

Study on Corrosion of CO 2 in Pipelines in the Presence of Hydrate

PREDICTION AND PREVENTION OF CO2 CORROSION OF OIL TUBULAR GOODS

Main control factors and prediction model of flow-accelerated CO2/H2S synergistic corrosion for X65 steel

Burst Pressure Prediction of Subsea Supercritical CO2 Pipelines

The Influence of CO2 Physical Properties on Casing and Its Prediction Method

Effect of CO2 content on corrosion non-uniformity of 20# steel in oil–water two-phase based on wire beam electrode technique

Study on the Corrosion Mechanism of N80 Steel in Simulated Oxygen-Reduced Air Drive Production Wellbores

Numerical Predictions of Uniform CO2 Corrosion in Complex Fluid Domains Using Low Reynolds Number Models