6.3: Invited Paper: Conformal Organic Field‐Effect Transistor Array Fabricated by Photo‐Lithography

Qingxin Tang
DOI: https://doi.org/10.1002/sdtp.13384
2019-01-01
Abstract:Next-generation electronics require that devices with lightweight, flexibility, and portability, can be worn directly on the human body, or integrated into the existing life items. Conformal devices with good flexibility and elasticity, that enable intimate and noninvasive adherence on uneven surfaces, have shown a big potential in next-generation electronics, such as electronic skin, human activities monitoring, personal healthcare, and human-machine interface. Previous work based on geometric designs, such as wavy and serpentine structures, transfers the stiffisland devices onto pre-strained stretchable substrates to impart conformability to electronics and presents the potential for a variety of wearable and implantable applications. However, the rigid nature of these active devices has limited device density, mechanical robustness, and wide applicability. So far, the whole device with sufficient conformability remains scarce because the fabrication of such a device strictly requires a new design of device geometry and a relevant adopt of materials possessing elasticity and flexibility to eliminate strain-introduced wrinkles through electrostatic adherence. Here, we have designed a novel photolithography-compatible coplanar electrode with bottom-gate bottom-contact configuration, for integration of rubrene nanobelt single-crystals into conformal organic field-effect transistors (OFETs) with the mobility as high as 23.9 cm 2 V -1 s -1 and near-zero threshold voltage. Moreover, the photolithography-compatible coplanar electrode can be also used to fabricate solution-processed TIPSpentacene single-crystal OFET array, which avoids the organic solvent corrosion efficiently. The resulting OFET array presents excellently electrical properties with device yield as high as 100%, good device uniformity, low threshold voltage, and field-effect mobility up to 0.79 cm 2 V -1 s -1 . All the conformal OFETs show the outstanding conformability and they can work well when conformed onto different curved objects. These results open up the capability of organic single crystals for conformal OFETs and reveal the strong potential of the new-type electrode for future large-scale wearable and implantable electronics.
What problem does this paper attempt to address?