Surface acidity enhancement of CeO2 catalysts via modification with a heteropoly acid for the selective catalytic reduction of NO with ammonia

Yu Ke,Wenjun Huang,Sichao Li,Yong Liao,Jiaxing Li,Zan Qu,Naiqiang Yan

DOI: https://doi.org/10.1039/c9cy01346f

2019-01-01

Abstract:The surface acidity enhanced CeO2 catalysts exhibited a SCR reaction path that both mechanisms existed but E-R dominated.

What problem does this paper attempt to address?

Surface Acidity Enhancement of CeO2 Catalysts Via Modification with a Heteropoly Acid for the Selective Catalytic Reduction of NO with Ammonia

Yu Ke,Wenjun Huang,Sichao Li,Yong Liao,Jiaxing Li,Zan Qu,Naiqiang Yan

DOI: https://doi.org/10.1039/c9cy01346f

IF: 6.177

2019-01-01

Catalysis Science & Technology

Abstract:The surface acidity enhanced CeO2 catalysts exhibited a SCR reaction path that both mechanisms existed but E-R dominated.
Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Qimin Zhou,Kailin He,Xiaoxiang Wang,Khak Ho Lim,Pingwei Liu,Wenjun Wang,Qingyue Wang

DOI: https://doi.org/10.1016/j.apcata.2022.118796

2022-01-01

Abstract:Low-temperature selective catalytic reduction with NH3 (LT-SCR) is a promising approach for NOx remediation. This work utilized bimetallic metal-organic frameworks (MOFs) to prepare CeMOx (M=Ti, Cu) catalysts allowing the homogeneous distribution of promoters to investigate LT-SCR explicitly. The strong interfacial interaction between nanoscale-mixed components was characterized on CeTiOx by HRTEM, micro-Raman, and XPS, resulting in high acidity and good redox properties with abundant Ce3+ and Ti4+. It obtained over 80% conversion from 180 degrees C to 300 degrees C with 100% N2 selectivity, and maintained stable performance in SO2/H2O at a high GHSV of 150,000 h-1. In situ DRIFTS reveals that NH3 adsorption was promoted on CeTiOx, which accelerated reaction between NOx and adsorbed NH3 via Eley-Rideal mechanism. Meanwhile, the aliovalent substitution of ceria by Cu2+ was observed on CeCuOx, forming oxygen vacancies. Its high redox properties enhanced NOx conversion by Langmuir-Hinshelwood mechanism, but triggered NH3 peroxidation, leading to poor N2 selectivity.
Acid treatment of ZrO2-supported CeO2 catalysts for NH3-SCR of NO: Influence on surface acidity and reaction mechanism

Xiaodi Li,Zhitao Han,Xinxin Wang,Shaolong Yang,Gang Liu,Yu Gao,Chenglong Li

DOI: https://doi.org/10.1016/j.jtice.2021.11.011

IF: 5.477

2022-03-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Background Due to excellent oxygen storage capacity and redox ability, Ce-based catalysts are usually considered as one of the promising candidates of traditional V-based catalysts for NH3-SCR of NO. However, surface acidity of Ce-based catalysts is often insufficient which restrains their SCR performance to some extent. Methods Herein, ZrO2-supported CeO2 catalysts were prepared by precipitation and wet impregnation methods. Aiming to promote catalyst surface acidity, a novel method was proposed to pre-treat ZrO2 support with various acids (HCl, HNO3, H3PO4 and H2SO4) via impregnation process. and the effects of acid treatment on SCR performance of CeO2/ZrO2 catalysts had been investigated. Significant findings It was worthy to note that H2SO4-treated CeO2/ZrO2 catalyst exhibited a superior NO removal efficiency which was higher than 94% in a wide temperature range of 248–500 °C. NH3-TPD results revealed that the surface acidities acidity of CeO2/ZrO2 catalysts had been obviously enhanced after acid treatment with HNO3, H3PO4 and H2SO4, except for HCl. According to in-situ DRIFRS results, one could infer that SCR reactions occurred over CeO2/ZrO2 catalyst without acid treatment might proceed only in E-R mechanism. But for acid-treated CeO2/ZrO2 catalysts, both E-R and L-H mechanisms were might be followed in SCR reaction process.

engineering, chemical
Effect of SO 2 introduction into CeO 2 on its surface acidity and redox property for the selective catalytic reduction of NO with NH 3

Xuejun Zhang,Dujuan Mo,Zhongxian Song,Wei Liu,Haiyang Li,Nana Guan,Mengru Zhang,Ruihua Guo,Zhenzhen Huang

DOI: https://doi.org/10.1039/d3nj03924b

IF: 3.3

2023-11-29

New Journal of Chemistry

Abstract:Gaseous SO 2 acidification Ce-based catalysts were prepared and used for the selective reduction of NO with NH 3 . S–Ce was obtained by direct anaerobic sulfation of CeO 2 , while H–S–Ce was obtained by reduction of CeO 2 and then anaerobic sulfation. Both S–Ce and H–S–Ce exhibited excellent SCR activity, and the S–Ce catalyst displayed the best catalytic performance. The activity of CeO 2 was below 30% in the whole temperature range, while the activity of S–Ce reached 90% at 250 °C and remained 100% at 300–450 °C. Anaerobic sulfation could enhance the redox and surface acidity of the S–Ce catalyst. The acid sites favored NH 3 adsorption, while the H–S–Ce catalyst exhibited considerable surface acidity, but the redox performance was weakened by stable sulfate. The reaction mechanism showed that a huge number of NH 3 species adsorbed on S–Ce catalysts were consumed by NO gas. The present nitrate species and NO 2 were removed. The SCR reaction followed E–R and L–H mechanisms for S–Ce. A large number of NH 3 species on H–S–Ce were cleared by NO, and NO could hardly adsorb on its surface. The SCR reaction followed the E–R mechanism.

chemistry, multidisciplinary
Enhanced Performance of Iron-Cerium NO Reduction Catalysts by Sulfuric Acid Treatment: the Synergistic Effect of Surface Acidity and Redox Capacity

Yanping Ma,Wei li,Huimin Wang,Jianjun Chen,Junjie Wen,Siyuan Xu,Xiaoyan Tian,Lianyun Gao,Zhichao Hou,Qiulin Zhang,Hao Yang

DOI: https://doi.org/10.1016/j.apcata.2021.118200

2021-01-01

Abstract:CeO2-based catalysts have raised extensive attention in selective catalytic reduction of NO with NH3 but the poor T-90 operation window limits their industrial application. In present work, FeOx-CeO2 mixed oxides were prepared by a sol-gel method for NH3-SCR, and the effects of sulfuric acid treatment on the catalytic performance were systematically investigated. The results showed that sulfuric acid treatment significantly improved the high temperature activity. Compared to the FeOx-CeO2 sample, the T-90 operation window of FeOx-CeO2-S was greatly broadened from 200-300 degrees C to 250-450 degrees C. Various characterizations demonstrated that sulfuric acid introduction increased redox capacity and also enhanced surface acidity. The synergistic effect of these two parameters was closely associated with the enhanced performance. Further investigations revealed that the sulfuric acid modification favored the formation of active intermediate species for N-2 generation, while inhibited the formation of N2O and NOx, thus contributing to the high catalytic activity and N-2 selectivity.
Activating low-temperature NH3-SCR catalyst by breaking the strong interface between acid and redox sites: A case of model Ce2(SO4)3-CeO2 study

Jiawei Ji,Meizan Jing,Xiuwen Wang,Wei Tan,Kai Guo,Lulu Li,Xin Wang,Wang Song,Lijun Cheng,Jingfang Sun,Weiyu Song,Changjin Tang,Jian Liu,Lin Dong

DOI: https://doi.org/10.1016/j.jcat.2021.05.001

IF: 7.3

2021-07-01

Journal of Catalysis

Abstract:The occurrence of NH3-SCR (selective catalytic reduction of NO with NH3) reaction on catalyst surface typically requires acid and redox sites. However, the role of acid-redox interaction on NH3-SCR performance is still obscure due to complex acidities and entangled acid-redox sites. Herein, three types of model Ce2(SO4)3-CeO2 catalysts with distinct interfaces are constructed to reveal the effect of acid-redox interaction on NH3-SCR performance. That is, SO4 2-/CeO2-VS (vapor sulfation of ceria) with strong acid-redox interfacial contact, SO4 2-/CeO2-WI (wet impregnation), and SO4 2-/CeO2-SG (solid grinding) with limited interfaces. It is found the redox property is significantly disturbed as a result of the electron-withdrawing effect from the sulfate. Theoretical result unravels that the introduction of Ce2(SO4)3 retards the oxygen vacancy formation over CeO2. Due to restricted interfaces in SO4 2-/CeO2-SG, the negative influence from acid sites is greatly alleviated. Further mechanism study discloses the weakened acid-redox interaction actually changes the nature of surface NOx species, resulting in the generation of reactive species (*O-N-O* and cis-N2O2 2-) and the promotion of surface reaction via Langmuir-Hinshelwood (L-H) mechanism.

chemistry, physical,engineering, chemical
Revealing the effect of paired redox-acid sites on metal oxide catalysts for efficient NO removal by NH3-SCR

Wei Tan,Chunying Wang,Shuohan Yu,Yaobin Li,Shaohua Xie,Fei Gao,Lin Dong,Fudong Liu

DOI: https://doi.org/10.1016/j.jhazmat.2021.125826

IF: 13.6

2021-08-01

Journal of Hazardous Materials

Abstract:Understanding the nature of active sites on metal oxide catalysts in the selective catalytic reduction (SCR) of NO by NH3 (NH3-SCR) is a crucial prerequisite for the development of novel efficient NH3-SCR catalysts. In this work, two CeO2-based SCR catalyst systems with diverse acidic metal oxides-CeO2 interfaces, i.e., Nb2O5-CeO2 (Nb2O5/CeO2 and CeO2/Nb2O5) and WO3-CeO2 (WO3/CeO2 and CeO2/WO3), were prepared and used to reveal the relationship between NH3-SCR activity and surface acidity/redox properties. In combination with the results of the NH3-SCR activity test and various characterizations, it was found that the NH3-SCR performance of Nb2O5-CeO2 and WO3-CeO2 catalysts was highly dependent on the strong interactions between the redox component (CeO2) and acidic component (Nb2O5 or WO3), as well as the amount of paired redox-acid sites. From a quantitative perspective, an activity-surface acidity/redox property relationship was proposed. For both Nb2O5-CeO2 and WO3-CeO2 catalysts systems operated at the more concerned low-temperature range (200 °C), the NH3-SCR activity in low NOx conversion region (< 40%) was mainly dominated by the surface acidity of catalysts, while the NH3-SCR activity in high NOx conversion region (> 40%) was more determined by redox properties.

environmental sciences,engineering, environmental
Revealing the Effect of Paired Redox-Acid Sites on Metal Oxide Catalysts for Efficient NOx Removal by NH3-SCR.

Wei Tan,Chunying Wang,Shuohan Yu,Yaobin Li,Shaohua Xie,Fei Gao,Lin Dong,Fudong Liu

DOI: https://doi.org/10.1016/j.jhazmat.2021.125826

IF: 13.6

2021-01-01

Journal of Hazardous Materials

Abstract:Understanding the nature of active sites on metal oxide catalysts in the selective catalytic reduction (SCR) of NO by NH3 (NH3-SCR) is a crucial prerequisite for the development of novel efficient NH3-SCR catalysts. In this work, two CeO2-based SCR catalyst systems with diverse acidic metal oxides-CeO2 interfaces, i.e., Nb2O5-CeO2 (Nb2O5/CeO2 and CeO2/Nb2O5) and WO3-CeO2 (WO3/CeO2 and CeO2/WO3), were prepared and used to reveal the relationship between NH3-SCR activity and surface acidity/redox properties. In combination with the results of the NH3-SCR activity test and various characterizations, it was found that the NH3-SCR performance of Nb2O5-CeO2 and WO3-CeO2 catalysts was highly dependent on the strong interactions between the redox component (CeO2) and acidic component (Nb2O5 or WO3), as well as the amount of paired redox-acid sites. From a quantitative perspective, an activity-surface acidity/redox property relationship was proposed. For both Nb2O5-CeO2 and WO3-CeO2 catalysts systems operated at the more concerned low-temperature range (200 °C), the NH3-SCR activity in low NOx conversion region (< 40%) was mainly dominated by the surface acidity of catalysts, while the NH3-SCR activity in high NOx conversion region (> 40%) was more determined by redox properties.
Roles of Lewis and Brønsted Acid Sites in NO Reduction with Ammonia on CeO2-ZrO2-NiO-SO42− Catalyst

Si Zhichun,Weng Duan,Wu Xiaodong,Jiang Yang

DOI: https://doi.org/10.1016/s1002-0721(09)60189-7

IF: 4.632

2010-01-01

Journal of Rare Earths

Abstract:Nickel and sulfate co-modified CeO2-ZrO2 catalysts were prepared by sol-gel method. The catalysts were characterized by XRD, FTIR, XPS, NH3 chemisorption and NH3-SCR activity tests. The results showed that the enhanced acidity of CeO2-ZrO2 catalysts by nickel and sulfate co-modification was responsible for the broadened temperature window and improved the selectivity to N2 in NH3-SCR deNOx. The introduction of nickel to CeO2-ZrO2 solid solutions resulted in more Ce3+ on surface of catalyst, leading to an increased Lewis acidity of catalyst. Higher Lewis acidity of catalyst facilitated ammonia activation at low temperature (<300 °C) and thereby improved the NH3-SCR activity. The enhanced high-temperature (>300 °C) activity and selectivity of catalysts arose from the introduction of Brønsted acid sites (less oxidative than Lewis acid sites) by sulfate modification.
Shape Dependence and Sulfate Promotion of CeO2 for Selective Catalytic Reduction of NO with NH3

Lei Ma,Chang Yup Seo,Mohit Nahata,Xiaoyin Chen,Junhua Li,Johannes W. Schwank

DOI: https://doi.org/10.1016/j.apcatb.2018.03.065

2018-01-01

Abstract:Thermally stable CeO2 cubes and nanospheres were synthesized and modified by sulfation treatment. Non-sulfated CeO2 cubes and nanospheres did not exhibit good catalytic performance for selective catalytic reduction of NOx with NH3 (NH3-SCR), but mainly contributed towards an undesired side reaction of NH3 oxidation above 350 degrees C. Based on the structural, morphological and physicochemical characterization, it was observed that CeO2 nanospheres comprising small crystallites could easily release active oxygen species, which resulted in strong NH3 oxidation. However, sulfation treatment greatly improved the catalytic performance of NH3-SCR on both CeO2 cubes and nanospheres. Sulfated CeO2 catalysts did not contribute to significant NH3 oxidation due to the inhibited reducibility of Ce4+ coordinated with the surface sulfates. The adsorbed ammonia could be activated on Bronsted acid sites generated by the formation of surface Ce-2(SO4)(3) species, while gaseous NOx could be activated on separate surface sites of Ce4+. The presence of separate reaction sites for NH3 and NOx is believed to be important for the improved catalytic performance of SCR reaction. Sulfated CeO2 cubes outperformed sulfated CeO2 nanospheres in the entire test temperature window (200-500 degrees C). The improved performance of sulfated CeO2 cubes appears to be related to surfaces with abundant Bronsted acid sites and relatively weak reducibility of Ce4+. These fundamental findings contribute to a better mechanistic understanding needed for designing efficient CeO2-based NOx reduction catalysts in the future.
Revealing the Dynamic Behavior of Active Sites on Acid-Functionalized CeO 2 Catalysts for NO x Reduction

Pan Zhang,Aling Chen,Tianwei Lan,Wenqiang Qu,Xiaonan Hu,Kai Zhang,Dengsong Zhang

DOI: https://doi.org/10.1021/acs.langmuir.3c01033

IF: 3.9

2023-06-14

Langmuir

Abstract:Unraveling the dynamics of the active sites upon CeO2-based catalysts in selective catalytic reduction of nitrogen oxides by ammonia (NH3-SCR) is challenging. In this work, we prepared tungsten-acidified and sulfated CeO2 catalysts and used operando spectroscopy to reveal the dynamics of acid sites and redox sites on catalysts during NH3-SCR reaction. We found that both Lewis and Brønsted acid sites are needed to participate in the catalytic reaction. Notably, Brønsted acid sites are the main active sites after a tungsten-acidified or sulfated treatment, and the change of Brønsted acid sites significantly affects the NOx removal. Moreover, acid functionalization promotes the cerium species cycle between Ce4+ and Ce3+ for the NOx reduction. This work is critical to deeply understanding the natural properties of active sites, and it also provides new insights into the mechanism for NH3-SCR over CeO2-based catalysts.

chemistry, multidisciplinary, physical,materials science
Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

Liu Xuesong,Wu Xiaodong,Weng Duan,Shi Lei

DOI: https://doi.org/10.1016/s1002-0721(16)60127-8

IF: 4.632

2016-01-01

Journal of Rare Earths

Abstract:Cu/ZSM-5 and CeO2-modified Cu/ZSM-5 catalysts were prepared by a wetness impregnation method. The addition of CeO2 was found to enhance the NOx selective catalytic reduction (SCR) activity of the catalyst at low temperatures, but the high-temperature activity was weakened. The catalysts were characterized by X-ray diffraction (XRD), nitrogen physisorption, inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), H2 temperature-programmed reduction (TPR) and NH3 temperature-programmed desorption (TPD). The results showed that more CuO clusters instead of isolated Cu2+ species were obtained on the modified catalyst. These active CuO clusters, as well as the Cu-Ce synergistic effect, improved the redox property of the catalyst and low-temperatures SCR activity via promoting the oxidation of NO to NO2 and fast SCR reaction. The loss in high-temperatures activity was attributed to the enhanced competitive oxidation of NH3 by O2 and decreased surface acidity of the catalyst.
The Enhanced Performance of Ceria with Surface Sulfation for Selective Catalytic Reduction of No by Nh3

Tingting Gu,Yue Liu,Xiaole Weng,Haiqiang Wang,Zhongbiao Wu

DOI: https://doi.org/10.1016/j.catcom.2010.10.003

IF: 3.51

2010-01-01

Catalysis Communications

Abstract:The selective catalytic reduction (SCR) of NO with NH3 over fresh and sulfated CeO2 catalysts had been investigated in this study. Experimental results showed that the sulfated CeO2 sample had significantly higher NO conversion than the fresh one and revealed an excellent selectivity to N2 within the temperature range of 200–570°C. By characterizations via BET, XRD, XPS, EDS and TPD, it was concluded that the improvement in SCR activity by sulfation might be originated from the increase of active oxygen species and the enhancement of NH3 chemisorption after surface sulfation, both of which were conducive to NH3 activation.
Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Xiang Gao,Ye Jiang,Yincheng Fu,Yi Zhong,Zhongyang Luo,Kefa Cen

DOI: https://doi.org/10.1016/j.catcom.2009.11.024

IF: 3.51

2017-01-01

Catalysis Communications

Abstract:CeO2/TiO2 catalysts were prepared by three methods, and their activities for SCR of NO with NH3 were investigated in the presence of O2. The experimental results indicate that the catalysts prepared by the single step sol–gel method have the best SCR activity and SO2 resistance regardless of the concentration of NO or SO2. High surface area and good redox ability are important to the catalytic activity, while the strong interaction between ceria and titania as well as high concentration of amorphous or highly dispersed nano-crystalline ceria should be the reason for the excellent performance of the catalyst prepared by the single step sol–gel method.
Bimetallic Cerium–copper Nanoparticles Embedded in Ordered Mesoporous Carbons As Effective Catalysts for the Selective Catalytic Reduction of NO with NH3

Jinghuan Chen,Feifei Cao,Ruiyang Qu,Xiang Gao,Kefa Cen

DOI: https://doi.org/10.1016/j.jcis.2015.06.001

IF: 9.9

2015-01-01

Journal of Colloid and Interface Science

Abstract:Bimetallic cerium-copper nanoparticles embedded in ordered mesoporous carbons (OMCs) with various Ce/Cu ratios were synthesized by "one-pot" self-assembly method, and their activities for the selective catalytic reduction (SCR) of NO with ammonia were studied. The structural and textural properties, surface chemistry, acidity, and reducibility were investigated by various techniques. Results showed that NO conversion was greatly influenced by the weight ratio of Ce to Cu. An appropriate Ce/Cu ratio in OMCs could enhance catalytic performance; the optimal catalytic performance was obtained with Ce5Cu5-OMC. Ordered mesoporous structures were formed for all synthesized samples. When Ce or Cu was incorporated into the OMCs, the amount of surface acidic oxygen functional groups increased, thereby promoting the acidic properties of the OMCs, especially those of the Cu-rich OMCs. The surface Cu(2+) species may accelerate ammonia activation and may play an important role in SCR reaction. The temperature-programmed reduction results illustrated that the Cu-rich OMCs had better reducibility, and the appropriate Ce/Cu ratio could further enhance the redox ability of the CexCuy-OMC catalysts. The existing redox cycle (Ce(4+)+Cu(+)↔Cu(2+)+Ce(3+)) promoted the activation of NH3 and consequently improved NH3-SCR activity.
Selective Catalytic Reduction of NO by NH3 on CeO2–MOx (M = Ti, Si, and Al) Dual Composite Catalysts: Impact of Surface Acidity

Lei Zhang,Jingfang Sun,Lulu Li,Shumin Ran,Genxiang Li,Chuanjiang Li,Chengyan Ge,Lin Dong

DOI: https://doi.org/10.1021/acs.iecr.7b03652

2018-01-01

Industrial & Engineering Chemistry Research

Abstract:A series of ceria based dual composite oxides were prepared via a co-precipitation method, and we focus on studying the relationships between the catalytic activity and physicochemical properties of ceria based catalysts. It is found that catalytic activity followed the order of CeTi > CeSi > CeAl > pure CeO2; X-ray diffraction indicates that all the ceria based dual composite oxides were the cubic fluorite-type phase of CeO2; the NH3 adsorption desorption results reveal that the NH3 adsorption stability and amount of CeO2 were improved by modification with TiO2, SiO2, or Al2O3; and the order of surface acidity was in agreement with the order of catalytic activity. Combined with other characterizations, we suppose that surface acidity is a decisive factor in influencing the catalytic activity of ceria based catalysts in the NH3-SCR reaction.
Modification Effect of Pt on the Active Sites of Sulfated CeO2 Nanorods for the Selective Catalytic Reduction of NO

Hao Fan,Yiming Yang,Xueting Yang,Xuefeng He,Jian Sun,Liu Yang,Jiao Li,Zhenxing Shen

DOI: https://doi.org/10.1021/acsanm.3c02492

IF: 6.14

2023-01-01

ACS Applied Nano Materials

Abstract:Although the surface acidity of CeO2 has beenincreasedby H2SO4 to increase its acid sites, the low-temperature(<250 & DEG;C) activity of sulfated CeO2 catalysts stillneeds to be improved. In this study, a Pt-modified CeO2 catalyst was prepared by impregnation or reduction methods to increaseits catalytic activity. The results showed the Pt-modified CeO2 catalyst significantly widened its low-temperature catalyticwindow. The NO conversion and N-2 selectivity of the Pt-1.0%/SCe-I sample were both more than 90% at 200-350 & DEG;C because of its numerous acid sites, excellent redox ability,and higher Pt2+ content. NH3, NH4+, -NH2, and bridging nitrates and monodentate nitrateson the Pt-1.0%/SCe-I catalyst surface acted as the activesubstances. Among them, coordinated NH3 at the Lewis acidsites reacted first. This study highlights the interactions amongmetals, sulfates, and carriers and supplies a useful method to improvethe low-temperature activity of sulfated CeO2.
Effects of Anaerobic SO2 Treatment on Nano-Ceo2 of Different Morphologies for Selective Catalytic Reduction of NOx with NH3

Jianjun Chen,Weitao Zhao,Qin Wu,Jinxing Mi,Xiuyun Wang,Lei Ma,Lilong Jiang,Chaktong Au,Junhua Li

DOI: https://doi.org/10.1016/j.cej.2019.122910

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Tuning surface acidity is a common strategy to improve the reactivity of Ce-based materials for selective catalytic reduction (SCR) of NOx with NH3. Traditionally, it is achieved by wet impregnation of sulfate species or treatment under an atmosphere of sulfur dioxide and oxygen. However, the two methods do not bring any change to the electronic state of CeO2, and Ce4+ ions which cause undesired side reactions are largely retained on the surface. Herein, we report a sulfation strategy that can tune the surface acid sites and regulate the electronic state of nano-CeO2. Using SO2 as reducible gas for surface sulfation, we prepared sulfated CeO2 (S-CeO2) catalysts of different morphologies and tested them for the NH3-SCR reaction. The characterization results revealed that the interaction between SO2 and nano-CeO2 is obviously affected by ceria morphology. Among the sulfated catalysts, that with rod morphology (S-CeO2-Rod) shows the highest NOx conversion, and exhibits superior sulfur and water tolerance. The excellent SCR activity of S-CeO2-Rod is attributed to the enrichment of oxygen vacancies and surface Ce3+ ions as a result of the abundant presence of sulfate species.
Modifications of CeO2–ZrO2 Solid Solutions by Nickel and Sulfate As Catalysts for NO Reduction with Ammonia in Excess O2

Zhichun Si,Duan Weng,Xiaodong Wu,Jiang Yang,Bin Wang

DOI: https://doi.org/10.1016/j.catcom.2010.05.011

IF: 3.51

2010-01-01

Catalysis Communications

Abstract:Nickel and sulfate were impregnated on CeO2–ZrO2 to improve the activity and selectivity of catalyst for NO abatement with ammonia. The performance of catalyst is related to the types of surface acid sites. Lewis acid sites, of which the strength is increased by modification of nickel, are considered as the essential active sites for low-temperature NH3–SCR reaction. The introduction of Brønsted acid sites by sulfate modification weakens the strong oxidation of ammonia but enhances the ammonia adsorption capacity of catalyst. Therefore, the high-temperature activity of catalysts is also improved.
Modification Effect of Pt on the Active Sites of Sulfated CeO 2 Nanorods for the Selective Catalytic Reduction of NO

Hao Fan,Yiming Yang,Xueting Yang,Xuefeng He,Jian Sun,Liu Yang,Jiao Li,Zhenxing Shen

DOI: https://doi.org/10.1021/acsanm.3c02492

IF: 6.14

2023-08-10

ACS Applied Nano Materials

Abstract:Although the surface acidity of CeO2 has been increased by H2SO4 to increase its acid sites, the low-temperature (<250 °C) activity of sulfated CeO2 catalysts still needs to be improved. In this study, a Pt-modified CeO2 catalyst was prepared by impregnation or reduction methods to increase its catalytic activity. The results showed the Pt-modified CeO2 catalyst significantly widened its low-temperature catalytic window. The NO conversion and N2 selectivity of the Pt1.0%/SCe-I sample were both more than 90% at 200–350 °C because of its numerous acid sites, excellent redox ability, and higher Pt2+ content. NH3, NH4+, –NH2, and bridging nitrates and monodentate nitrates on the Pt1.0%/SCe-I catalyst surface acted as the active substances. Among them, coordinated NH3 at the Lewis acid sites reacted first. This study highlights the interactions among metals, sulfates, and carriers and supplies a useful method to improve the low-temperature activity of sulfated CeO2.

materials science, multidisciplinary,nanoscience & nanotechnology

Surface acidity enhancement of CeO<sub>2</sub> catalysts <i>via</i> modification with a heteropoly acid for the selective catalytic reduction of NO with ammonia

Surface Acidity Enhancement of CeO2 Catalysts Via Modification with a Heteropoly Acid for the Selective Catalytic Reduction of NO with Ammonia

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Acid treatment of ZrO2-supported CeO2 catalysts for NH3-SCR of NO: Influence on surface acidity and reaction mechanism

Effect of SO 2 introduction into CeO 2 on its surface acidity and redox property for the selective catalytic reduction of NO with NH 3

Enhanced Performance of Iron-Cerium NO Reduction Catalysts by Sulfuric Acid Treatment: the Synergistic Effect of Surface Acidity and Redox Capacity

Activating low-temperature NH3-SCR catalyst by breaking the strong interface between acid and redox sites: A case of model Ce2(SO4)3-CeO2 study

Revealing the effect of paired redox-acid sites on metal oxide catalysts for efficient NO removal by NH3-SCR

Revealing the Effect of Paired Redox-Acid Sites on Metal Oxide Catalysts for Efficient NOx Removal by NH3-SCR.

Roles of Lewis and Brønsted Acid Sites in NO Reduction with Ammonia on CeO2-ZrO2-NiO-SO42− Catalyst

Shape Dependence and Sulfate Promotion of CeO2 for Selective Catalytic Reduction of NO with NH3

Revealing the Dynamic Behavior of Active Sites on Acid-Functionalized CeO 2 Catalysts for NO x Reduction

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

The Enhanced Performance of Ceria with Surface Sulfation for Selective Catalytic Reduction of No by Nh3

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Bimetallic Cerium–copper Nanoparticles Embedded in Ordered Mesoporous Carbons As Effective Catalysts for the Selective Catalytic Reduction of NO with NH3

Selective Catalytic Reduction of NO by NH3 on CeO2–MOx (M = Ti, Si, and Al) Dual Composite Catalysts: Impact of Surface Acidity

Modification Effect of Pt on the Active Sites of Sulfated CeO2 Nanorods for the Selective Catalytic Reduction of NO

Effects of Anaerobic SO2 Treatment on Nano-Ceo2 of Different Morphologies for Selective Catalytic Reduction of NOx with NH3

Modifications of CeO2–ZrO2 Solid Solutions by Nickel and Sulfate As Catalysts for NO Reduction with Ammonia in Excess O2

Modification Effect of Pt on the Active Sites of Sulfated CeO 2 Nanorods for the Selective Catalytic Reduction of NO